Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыSAE

SAE AS4841

Заменен
FITTINGS, 37° FLARED, FLUID CONNECTION
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

SAE AMS2486F
Действует
Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
SAE AMS2488E
Действует
Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
SAE AMS4112D
Отменен
Aluminum Alloy, Bars, Rods, and Wire 4.4cu 1.5mg 0.60mn Rolled, Drawn, Or Cold Finished
SAE AMS4124F
Действует
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
SAE AMS4134H
Действует
Aluminum Alloy, Die Forgings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat and Naturally Aged
SAE AMS4141H
Действует
Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated
SAE AMS4610P
Действует
Brass, Free-Cutting Bars and Rods 61.5Cu - 35Zn - 3.1Pb or 2.8Pb Half Hard (H02)
SAE AMS4928W
Действует
Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed
SAE AMS5639K
Действует
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging and Ring Stock 19Cr - 10Ni Solution Heat Treated
SAE AMS5646R
Действует
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 11Ni - 0.60Cb(Nb) (347) Solution Heat Treated
SAE AMS5648N
Действует
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated
SAE AMS6370R
Действует
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
SAE AMS6382S
Действует
Steel, Bars, Forgings, Rings, and Stock for Forging or Flash Welded Rings Aircraft Quality 0.95Cr - 0.20Mo (0.38 - 0.43C) (4140) Annealed
SAE AS1376E
Действует
ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD
SAE AS1708H
Действует
FITTING END, INTERNAL FLARE, DESIGN STANDARD
SAE AS4395B
Действует
FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD
SAE AS4396B
Действует
FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD
SAE AS478S
Действует
Identification Marking Methods
SAE AS478J
Заменен
IDENTIFICATION MARKING METHODS
ASTM A108-99
Заменен
Standard Specification for Steel Bars, Carbon, Cold-Finished, Standard Quality — 4 стр.
ASTM A370-97a
Заменен
Standard Test Methods and Definitions for Mechanical Testing of Steel Products — 52 стр.
ASTM B154-95
Заменен
Standard Test Method for Mercurous Nitrate Test for Copper and Copper Alloys — 3 стр.
ASTM B16M-92
Заменен
Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines [Metric] (Withdrawn 2000) — 3 стр.
SAE AS4841A
Заменен
Fittings, 37° Internal Flare, Fluid Connection, Procurement Specification

На этот документ ссылаются

SAE AS4841A
Заменен
Fittings, 37° Internal Flare, Fluid Connection, Procurement Specification