Каталог стандартов
+7 (495) 223-46-76
+7 (812) 309-78-59
inform@normdocs.ru
О компании
Стандарты
Контакты
Заказать стандарт
Стандарты
SAE
SAE AS4841D
Действует
Fittings, 37 Degree Internal Flare, Fluid Connection, Procurement Specification
Описание
Изменения
Ссылки
Версии
Ссылочные документы
SAE AMS2472H
Действует
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Dyed Coatings
SAE AMS2486F
Действует
Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
SAE AMS2488E
Действует
Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
SAE AMS2658D
Действует
Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts
SAE AMS2700F
Действует
Passivation of Corrosion Resistant Steels
SAE AMS2759G
Действует
Heat Treatment of Steel Parts General Requirements
SAE AMS2770R
Действует
Heat Treatment of Wrought Aluminum Alloy Parts
SAE AMS2771F
Действует
Heat Treatment of Aluminum Alloy Castings
SAE AMS2772H
Действует
Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS4124F
Действует
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
SAE AMS4133F
Действует
Aluminum Alloy Forgings and Rolled Rings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated
SAE AMS4141H
Действует
Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated
SAE AMS4339C
Действует
Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu - 1.5Mg - 0.60Mn (2024-T851) Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS4610P
Действует
Brass, Free-Cutting Bars and Rods 61.5Cu - 35Zn - 3.1Pb or 2.8Pb Half Hard (H02)
SAE AMS4928W
Действует
Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed
SAE AMS5639K
Действует
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging and Ring Stock 19Cr - 10Ni Solution Heat Treated
SAE AMS5645T
Действует
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated
SAE AMS5646R
Действует
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 11Ni - 0.60Cb(Nb) (347) Solution Heat Treated
SAE AMS5648N
Действует
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated
SAE AMS5666K
Действует
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Extrusions, Rings, and Stock for Forgings, Extrusions, and Rings 62Ni - 21.5Cr - 9.0Mo - 3.65Cb (Nb) Annealed
SAE AMS6370R
Действует
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
SAE AMS6382S
Действует
Steel, Bars, Forgings, Rings, and Stock for Forging or Flash Welded Rings Aircraft Quality 0.95Cr - 0.20Mo (0.38 - 0.43C) (4140) Annealed
SAE AMSH6875C
Действует
Heat Treatment of Steel Raw Materials (Stabilized: Sep 2020)
SAE AMSQQA225/6B
Действует
Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished (Stabilized: Mar 2018)
SAE AMSQQA225/9A
Действует
Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished (Stabilized: Jul 2014)
SAE AMSQQP416G
Действует
Plating, Cadmium (Electrodeposited)
SAE AMSS6758B
Действует
Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock (Aircraft Quality) (Stabilized: Nov 2017)
SAE ARP4784B
Действует
Definitions and Limits, Metal Material Defects and Surface and Edge Features, Fluid Couplings, Fittings, and Hose Ends (Stabilized: Sep 2022)
SAE ARP9013A
Действует
Statistical Product Acceptance Requirements
SAE AS1376E
Действует
ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD
SAE AS1708H
Действует
FITTING END, INTERNAL FLARE, DESIGN STANDARD
SAE AS33583
Действует
TUBING END DOUBLE FLARE, STANDARD DIMENSIONS FOR
SAE AS4330A
Действует
TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD
SAE AS4395B
Действует
FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD
SAE AS4396B
Действует
FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD
SAE AS478S
Действует
Identification Marking Methods
SAE AS5176D
Действует
FITTING, SLEEVE, FLARED
SAE AS5202A
Действует
PORT OR FITTING END, INTERNAL STRAIGHT THREAD, DESIGN STANDARD
SAE AS5203
Действует
TUBE END, DOUBLE FLARE, DESIGN STANDARD
SAE AS5309A
Действует
FITTING END, SPHERICAL, 37° FLARED TUBE CONNECTION DESIGN STANDARD
SAE AS5310A
Действует
FITTING END, BULKHEAD, SPHERICAL, 37° FLARED TUBE CONNECTION DESIGN STANDARD
SAE AS71051B
Действует
Pipe Threads, Taper, Aeronautical National Form, Symbol ANPT - Design and Inspection Standard
SAE AS7112A
Заменен
National Aerospace and Defense Contractors Accreditation Program Requirements for Fluid System Components
SAE AS8879D
Действует
Screw Threads - UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter
ASTM A370-97a
Заменен
Standard Test Methods and Definitions for Mechanical Testing of Steel Products
— 52 стр.
ASTM B154-95
Заменен
Standard Test Method for Mercurous Nitrate Test for Copper and Copper Alloys
— 3 стр.
ASTM B16M-92
Заменен
Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines [Metric] (Withdrawn 2000)
— 3 стр.
ASTM B16/B16M-24
Действует
Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
— 5 стр.
ASTM B858M-95
Заменен
Standard Test Method for Determination of Susceptibility to Stress Corrosion Cracking in Copper Alloys Using an Ammonia Vapor Test�
— 3 стр.
ISO 6957:1988
Действует
Copper alloys; ammonia test for stress corrosion resistance
— 8 стр.
SAE AS4841C
Заменен
Fittings, 37 Degree Internal Flare, Fluid Connection, Procurement Specification
На этот документ ссылаются
SAE ARP4946
Заменен
Aerospace - Valves, Check, Hydraulic, Aircraft and Missile
SAE ARP4946A
Действует
Recommended Design and Test Requirements for Hydraulic Check Valves
SAE AS4842/1
Заменен
Fittings, 37° Flared to Pipe Threaded, Fluid Connection
SAE AS4875/1A
Действует
Fittings, Straight Thread Boss or Flanged 37° Flared, Fluid Connection
SAE AS5178D
Заменен
NUT, FITTING, BULKHEAD
SAE AS5178B
Заменен
NUT, FITTING, BULKHEAD
SAE AS5449
Заменен
FITTING END, WELD RING, SHORT TAPERED, DESIGN STANDARD
SAE AS4842/1A
Действует
Fittings, 37° Flared to Pipe Threaded, Fluid Connection
SAE AS5178C
Заменен
NUT, FITTING, BULKHEAD
SAE AS5178
Заменен
NUT, FITTING, BULKHEAD
SAE AS1708H
Действует
FITTING END, INTERNAL FLARE, DESIGN STANDARD
SAE AS5178A
Заменен
NUT, FITTING, BULKHEAD
SAE AS5178E
Действует
NUT, FITTING, BULKHEAD
SAE AS5309A
Действует
FITTING END, SPHERICAL, 37° FLARED TUBE CONNECTION DESIGN STANDARD
SAE AS5310A
Действует
FITTING END, BULKHEAD, SPHERICAL, 37° FLARED TUBE CONNECTION DESIGN STANDARD
SAE AS4396A
Заменен
FITTING END, BULKHEAD, FLARED TUBE CONNECTION, DESIGN STANDARD
SAE AS4396B
Действует
FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD
SAE AS5206
Заменен
NUT, FLARED, LONG
SAE AS4330A
Действует
TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD
SAE AS5449A
Заменен
FITTING END, WELD RING, SHORT TAPERED, DESIGN STANDARD
SAE AS4843/1
Заменен
Fittings, Beaded to 37° Flared, Fluid Connection
SAE AS1708G
Заменен
FITTING END, INTERNAL FLARE, DESIGN STANDARD
SAE AS1708F
Заменен
FITTING END, INTERNAL FLARE, DESIGN STANDARD
SAE AS1708E
Заменен
FITTING END, INTERNAL FLARE, DESIGN STANDARD
SAE AS4444/2
Действует
Fitting, 24° Cone Flareless to 37° Flared, Fluid Connection
SAE AS5179A
Заменен
NUT, FITTING, PORT
SAE AS5179
Заменен
NUT, FITTING, PORT
SAE AS5206A
Заменен
NUT, FLARED, LONG
SAE AS5406A
Заменен
FITTING, UNION, TUBE, .375 BULKHEAD
SAE AS5406B
Заменен
FITTING, UNION, TUBE, .375 BULKHEAD
SAE AS6230A
Действует
FITTING, 37° INTERNAL FLARE TO TUBE WELD, STRAIGHT AND REDUCER
SAE AS6230
Заменен
FITTING, 37° INTERNAL FLARE TO TUBE WELD, STRAIGHT AND REDUCER
SAE AS4395A
Заменен
FITTING END, FLARED TUBE CONNECTION, DESIGN STANDARD
SAE AS4395B
Действует
FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD
SAE AS5309
Заменен
FITTING END, SPHERICAL, 37° FLARED TUBE CONNECTION DESIGN STANDARD
SAE AS4875/1
Заменен
Fittings, Straight Thread Boss or Flanged to 37° Flared, Fluid Connection
SAE AS5203
Действует
TUBE END, DOUBLE FLARE, DESIGN STANDARD
SAE AS4843/1A
Действует
Fittings, Beaded to 37° Flared, Fluid Connection
SAE AIR5426
Действует
Fitting and Fitting Assembly Selection, Installation, Inspection and Maintenance of
SAE AS1037E
Заменен
FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARED
SAE AS1037F
Заменен
FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARED
SAE AS5194C
Заменен
FITTING, ADAPTER, STRAIGHT PIPE TO FLARED
SAE AS5194B
Заменен
FITTING, ADAPTER, STRAIGHT PIPE TO FLARED
SAE AS5194E
Действует
FITTING, ADAPTER, STRAIGHT PIPE TO FLARED
SAE AS5194A
Заменен
FITTING, ADAPTER, STRAIGHT PIPE TO FLARED
SAE AS5194D
Заменен
FITTING, ADAPTER, STRAIGHT PIPE TO FLARED
SAE AS5230
Заменен
FITTING, UNION AND REDUCER, FLARELESS
SAE AS5231
Заменен
FITTING, PLUG, TUBE END, FLARELESS
SAE AS5161C
Действует
FITTING, BOLT, FLUID PASSAGE
SAE AS5161B
Заменен
FITTING, BOLT, FLUID PASSAGE
SAE AS5161A
Заменен
FITTING, BOLT, FLUID PASSAGE
SAE AS5160B
Действует
FITTING, BOLT, FLARED
SAE AS5160A
Заменен
FITTING, BOLT, FLARED
SAE AS5168A
Заменен
FITTING, PLUG, TUBE END, FLARED
SAE AS5168B
Заменен
FITTING, PLUG, TUBE END, FLARED
SAE AS5168C
Действует
FITTING, PLUG, TUBE END, FLARED
SAE AS5167A
Заменен
FITTING, ADAPTER, FLARED, AIR PRESSURE GAUGE
SAE AS5167B
Действует
FITTING, ADAPTER, FLARED, AIR PRESSURE GAUGE
SAE AS5174A
Заменен
FITTING, UNION AND REDUCER, FLARED
SAE AS5180
Действует
FITTING, ADAPTER, BULKHEAD, FLARED TO HOSE
SAE AS5184
Действует
FITTING, ADAPTER, FLARED TO HOSE
SAE AS5183
Действует
FITTING, ADAPTER, HOSE TO STRAIGHT PIPE
SAE AS5168
Заменен
FITTING, PLUG, TUBE END, FLARED
SAE AS5167
Заменен
FITTING, ADAPTER, FLARED, AIR PRESSURE GAGE
SAE AS5160
Заменен
FITTING, BOLT, FLARED
SAE AS5174
Заменен
FITTING, UNION AND REDUCER, FLARED
SAE AS5189
Заменен
FITTING, ADAPTER, HOSE
SAE AS5189A
Действует
FITTING, ADAPTER, HOSE
SAE AS1036E
Заменен
FITTING, CROSS, STANDARD AND REDUCER, FLARED
SAE AS1036F
Заменен
FITTING, CROSS, STANDARD AND REDUCER, FLARED
SAE AS1036G
Заменен
FITTING, CROSS, STANDARD AND REDUCER, FLARED
SAE AS1035E
Заменен
FITTING, TEE, STANDARD AND REDUCER, FLARED
SAE AS1038E
Заменен
FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARED
SAE AS1033D
Заменен
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARED
SAE AS1039D
Заменен
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED
SAE AS1039E
Заменен
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED
SAE AS1034D
Заменен
FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARED
SAE AS1034E
Заменен
FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARED
SAE AS1033E
Заменен
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARED
SAE AS1040D
Заменен
FITTING, ELBOW, 45°, STANDARD AND REDUCER, BULKHEAD, FLARED
SAE AS1040E
Заменен
FITTING, ELBOW, 45°, STANDARD AND REDUCER, BULKHEAD, FLARED
SAE AS5205B
Действует
NUT, FITTING, ENGINE, FLARED
SAE AS5205A
Заменен
NUT, FITTING, ENGINE, FLARED
SAE AS1038F
Заменен
FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARED
SAE AS1035F
Заменен
FITTING, TEE, STANDARD AND REDUCER, FLARED
SAE AS1035G
Действует
FITTING, TEE, STANDARD AND REDUCER, FLARED
SAE AS1037G
Заменен
FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARED
SAE AS1037H
Действует
FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARED
SAE AS1033F
Заменен
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARED
SAE AS1033G
Действует
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARED
SAE AS1040G
Действует
FITTING, ELBOW, 45°, STANDARD AND REDUCER, BULKHEAD, FLARED
SAE AS1036H
Заменен
FITTING, CROSS, STANDARD AND REDUCER, FLARED
SAE AS1036K
Действует
FITTING, CROSS, STANDARD AND REDUCER, FLARED
SAE AS1036J
Заменен
FITTING, CROSS, STANDARD AND REDUCER, FLARED
SAE AS1038G
Заменен
FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARED
SAE AS1038H
Действует
FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARED
SAE AS1039F
Заменен
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED
SAE AS1039H
Действует
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED
SAE AS1039G
Заменен
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED
SAE AS1040F
Заменен
FITTING, ELBOW, 45°, STANDARD AND REDUCER, BULKHEAD, FLARED