This document gives specific and measurable design criteria to be applied at a design review prior to tooling. The specification is formatted as a checklist to aid in its use. The requirements do not apply in all situations so engineering judgment must be used. This is a specification for design criteria; applicable performance specifications (USCAR-2, etc.) must still be performed. Items in this document are grouped by component as follows:
- A Terminals
- B Secondary Terminal Locks
- C Connectors
- D Connector Locks
- E Secondary Connector Locks (Connector Position Assurance, CPA)
- F Connector Seals
- G Serviceability
- H High Voltage (≥60V) Application Requirements
- I Drawing and General Requirements
