Стандарты ASTM. 08.04 Plastic Piping Systems (I): D1598 – F2735 / Пластиковые трубопроводные системы (I): D1598

Действует

Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications — 8 стр.

ASTM F402-18

Действует

Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings — 2 стр.

ASTM F481-97(2019)

Действует

Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields — 4 стр.

ASTM F645-18b

Действует

Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems — 13 стр.

ASTM D2290-19a

Действует

Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe — 11 стр.

ASTM F1025-19

Действует

Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe — 3 стр.

ASTM D3139-19

Действует

Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals — 4 стр.

ASTM F1290-19

Действует

Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings — 4 стр.

ASTM F1588-96(2019)

Действует

Standard Test Method for Constant Tensile Load Joint Test (CTLJT) — 5 стр.

ASTM F1606-19

Действует

Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner — 6 стр.

ASTM F1674-18

Действует

Standard Test Method for Joint Restraint Products for Use with PVC Pipe — 4 стр.

ASTM F1803-15(2019)

Действует

Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter ; — 6 стр.

ASTM F1924-19

Действует

Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing — 5 стр.

ASTM F2433-05(2018)

Действует

Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness — 6 стр.

ASTM F2434-19

Действует

Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing — 6 стр.

ASTM F2787-13(2018)

Действует

Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers — 25 стр.

ASTM R0077

Действует

ISO Standards and Recommendations on Plastic Pipe Prepared by ISO/TC 138 (This is not an ASTM standard; available as PDF, only) — 6 стр.

ASTM F1948-20

Действует

Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing — 6 стр.

ASTM F949-20

Действует

Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings — 12 стр.

ASTM F3430-20

Действует

Standard Specification for Closed-Cell Cellular Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers — 8 стр.