Стандарты ISO. 85 Paper technology / Целлюлозно-бумажная промышленность

ISO 11093-8:2017

Действует

Paper and board -- Testing of cores -- Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis — 14 стр.

ISO 287:2017

Действует

Paper and board -- Determination of moisture content of a lot -- Oven-drying method — 18 стр.

ISO 2528:2017

Действует

Sheet materials -- Determination of water vapour transmission rate (WVTR) -- Gravimetric (dish) method — 22 стр.

ISO 11480:2017

Действует

Pulp, paper and board -- Determination of total chlorine and organically bound chlorine — 24 стр.

ISO 8791-3:2005

Действует

Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 3: Sheffield method — 20 стр.

ISO 11475:2017

Действует

Paper and board -- Determination of CIE whiteness, D65/10 degrees (outdoor daylight) — 22 стр.

ISO 4094:2017

Действует

Paper, board and pulps -- General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3 — 40 стр.

ISO 5263-1:2004

Действует

Pulps -- Laboratory wet disintegration -- Part 1: Disintegration of chemical pulps — 12 стр.

ISO 5263-2:2004

Действует

Pulps -- Laboratory wet disintegration -- Part 2: Disintegration of mechanical pulps at 20 degrees C — 12 стр.

ISO 5263-3:2004

Действует

Pulps -- Laboratory wet disintegration -- Part 3: Disintegration of mechanical pulps at > 85 degrees — 16 стр.

ISO 5264-1:1979

Действует

Pulps; Laboratory beating; Part 1 : Valley beater method — 8 стр.

ISO 5264-2:2011

Действует

Pulps -- Laboratory beating -- Part 2: PFI mill method — 18 стр.

ISO 5267-1:1999

Действует

Pulps. Determination of drainability. Part 1. Schopper-Riegler method — 12 стр.

ISO 5267-1:1999/Cor.1:2001

Действует

Pulps. Determination of drainability. Part 1. Schopper-Riegler method. Technical Corrigendum 1 — 1 стр.

ISO 5267-2:2001

Действует

Pulps. Determination of drainability. Part 2. "Canadian Standard" freeness method — 22 стр.

ISO 5269-1:2005

Действует

Pulps -- Preparation of laboratory sheets for physical testing -- Part 1: Conventional sheet-former method — 14 стр.

ISO 5269-2:2004

Действует

Pulps -- Preparation of laboratory sheets for physical testing -- Part 2: Rapid-Kothen method — 16 стр.

ISO 5269-3:2008

Действует

Pulps -- Preparation of laboratory sheets for physical testing -- Part 3: Conventional and Rapid- Kothen sheet formers using a closed water system — 14 стр.

ISO 5270:2012

Действует

Pulps -- Laboratory sheets -- Determination of physical properties — 16 стр.

ISO 5350-1:2006

Действует

Pulps -- Estimation of dirt and shives -- Part 1: Inspection of laboratory sheets by transmitted light — 20 стр.