Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM B16/B16M-19

Заменен
Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines — 5 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM B250/B250M-19
Действует
Standard Specification for General Requirements for Wrought Copper Alloy Wire — 10 стр.
ASTM B601-18a
Заменен
Standard Classification for Temper Designations for Copper and Copper Alloys—;Wrought and Cast — 6 стр.
ASTM E478-08(2017)
Действует
Standard Test Methods for Chemical Analysis of Copper Alloys — 22 стр.
ASTM B249/B249M-23
Действует
Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings — 13 стр.
ASTM E8/E8M-24
Действует
Standard Test Methods for Tension Testing of Metallic Materials — 35 стр.
ASTM E18-24
Действует
Standard Test Methods for Rockwell Hardness of Metallic Materials — 38 стр.
ASTM B16/B16M-24
Действует
Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines — 5 стр.
ASTM B16/B16M-10(2015)
Заменен
Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines — 5 стр.

На этот документ ссылаются

ASTM F2854-10(2016)
Заменен
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing — 4 стр.
ASTM F2434-18
Заменен
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing — 6 стр.
ASTM D2625-94(2015)
Заменен
Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method) — 7 стр.
ASTM D2670-19
Заменен
Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method) — 7 стр.
ASTM D950-03(2011)
Заменен
Standard Test Method for Impact Strength of Adhesive Bonds — 4 стр.
ASTM D3233-93(2014)
Заменен
Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods) — 11 стр.
ASTM F2854-20
Заменен
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing — 5 стр.
ASTM F2854-20a
Заменен
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing — 5 стр.
ASTM F2929-17
Заменен
Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig — 10 стр.
ASTM F826-94(2017)
Заменен
Standard Specification for Tops, Furniture, Marine, Steel — 5 стр.
ASTM F721-18
Заменен
Standard Specification for Gage Piping Assemblies — 4 стр.
ASTM F1807-19b
Заменен
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing — 9 стр.
ASTM F1807-19a
Заменен
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing — 9 стр.
ASTM F2080-18
Заменен
Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe — 7 стр.
ASTM F2080-19
Заменен
Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe — 7 стр.
ASTM D1062-08(2015)
Заменен
Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds — 4 стр.
ASTM F1974-09(2015)
Заменен
Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe — 7 стр.
ASTM F1974-09(2020)
Заменен
Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe — 7 стр.
ASTM F1387-99(2012)
Заменен
Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings — 29 стр.
ASTM F1387-19
Заменен
Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings — 31 стр.
ASTM B249/B249M-19a
Заменен
Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings — 14 стр.
ASTM B249/B249M-22
Заменен
Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings — 14 стр.
ASTM B927/B927M-17
Заменен
Standard Specification for Brass Rod, Bar, and Shapes — 7 стр.
ASTM B249/B249M-20
Заменен
Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings — 14 стр.
ASTM B16/B16M-10(2015)
Заменен
Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines — 5 стр.
ASTM B16/B16M-24
Действует
Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines — 5 стр.
ASTM F1960-23
Заменен
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing — 8 стр.
ASTM F1960-22
Заменен
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing — 8 стр.
ASTM F1960-21
Заменен
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing — 8 стр.
ASTM F1960-20
Заменен
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing — 8 стр.
ASTM F1960-19
Заменен
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing — 7 стр.
ASTM F1960-19a
Заменен
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing — 7 стр.
ASTM F1960-23a
Заменен
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing — 8 стр.