Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above; German version EN 14015:2004— 240 стр.
Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys; German version EN 14532-1:2004— 44 стр.
Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods; German version EN 14638-3:2010 + AC:2012— 40 стр.
Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar; German version EN 14382:2005— 84 стр.
LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1000 litres; German version EN 14893:2006— 58 стр.
High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies; German version EN 14399-3:2005— 20 стр.
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 3: Concrete components; German version EN 14620-3:2006— 22 стр.
Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods; German version EN 14638-3:2010— 42 стр.
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components; German version EN 14620-2:2006— 58 стр.
Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction; German version EN 14208:2004— 44 стр.
Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar; German version EN 14382:2002— 58 стр.
Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing— 127 стр.
High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies; German version EN 14399-4:2005— 21 стр.
High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies; German version EN 14399-4:2005— 19 стр.
Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods; German version EN 14638-1:2006— 40 стр.
Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004); English version EN ISO 21329:2004— 88 стр.
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements; German version EN 1804-1:2001— 39 стр.
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements; German version EN 1804-1:2001— 34 стр.
Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock; German version EN 286-3:1994— 34 стр.
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 2: Cylinders made of seamless steel with an R<(Index)m> value of 1100 MPa and above; German version EN 1964-2:2001— 51 стр.
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 1: Cylinders made of seamless steel with an R<(Index)m> value of less than 1100 MPa; German version EN 1964-1:1999— 26 стр.
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements; German version EN 1804-1:2001+A1:2010— 40 стр.
Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination; German version EN 875:1995— 6 стр.
Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; German version EN 88-2:2007— 44 стр.
Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties; German version EN 1993-1-10:2005 + AC:2009— 22 стр.
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams; German version EN 1804-2:2001+A1:2010— 40 стр.
Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components; German version EN 1090-1:2009— 45 стр.
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of capacity from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of stainless steel with a maximum R<(Index)m> value of less than 1100 MPa; German version EN 1964-3:2000— 54 стр.
Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components; German version EN 1090-1:2009— 45 стр.
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams; German version EN 1804-2:2001— 33 стр.
Specification and approval of welding procedures for metallic materials - Part 9: Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines; German version EN 288-9:1999— 24 стр.
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000— 59 стр.
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings; German and English version EN 4700-006:2010— 62 стр.
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock; German and English version EN 4700-005:2010— 52 стр.
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip; German and English version EN 4700-001:2010— 59 стр.
Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel; German version EN 13322-1:2003— 51 стр.
Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction; German version EN 13094:2004— 85 стр.
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories; German version EN 12952-2:2001— 24 стр.
Earth moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:1994, including Amendment A1:1997, modified); German version EN 13510:2000— 18 стр.
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler; German version EN 12952-5:2001— 79 стр.
Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 2: Stainless steel; German version EN 13322-2:2003— 48 стр.
LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers design and manufacture; German version EN 12493:2008— 66 стр.
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler; German version EN 12952-6:2002— 32 стр.
Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors; German version EN 12693:2008— 62 стр.
Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 2: Stainless steel; German version EN 13322-2:2003 + A1:2006— 48 стр.
Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction; German version EN 13094:2008— 90 стр.