Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN EN ISO 3269:2000-11

Отменен
Fasteners - Acceptance inspection (ISO 3269:2000); English version of DIN EN ISO 3269 — 22 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN EN 20898-2:1994-02
Отменен
Mechanical properties of fasteners; part 2: nuts with specified proof load values; coarse thread (ISO 898-2:1992); German version EN 20898-2:1993 — 16 стр.
DIN EN ISO 2702:1994-10
Отменен
Heat-treated steel tapping screws - Mechanical properties (ISO 2702:1992); German version EN ISO 2702:1994 — 5 стр.
DIN EN ISO 3506-1:1998-03
Отменен
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997 — 19 стр.
DIN EN ISO 3506-2:1998-03
Отменен
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:1997); German version EN ISO 3506-2:1997 — 16 стр.
DIN EN ISO 3506-3:1998-03
Отменен
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997); German version EN ISO 3506-3:1997 — 12 стр.
DIN EN ISO 4042:1999-10
Отменен
Fasteners - Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999 — 26 стр.
DIN EN ISO 4759-1:2001-04
Действует
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 — 65 стр.
DIN EN ISO 4759-3:2000-09
Отменен
Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000 — 8 стр.
DIN EN ISO 7085:2000-01
Отменен
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (ISO 7085:1999); German version EN ISO 7085:1999 — 9 стр.
DIN EN ISO 10683:2018-11
Действует
Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018); German version EN ISO 10683:2018 — 42 стр.
DIN ISO 1502:1996-12
Действует
ISO general purpose metric screw threads - Gauges and gauging (ISO 1502:1996) — 23 стр.
DIN EN 26157-1:1991-12
Действует
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991 — 12 стр.
DIN ISO 2859-1:1993-04
Отменен
Sampling procedures for inspection by attributes; sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection; identical with ISO 2859-1:1989 — 72 стр.
DIN EN ISO 898-1:2013-05
Действует
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013); German version EN ISO 898-1:2013 — 66 стр.
DIN EN ISO 898-2:2012-08
Действует
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012); German version EN ISO 898-2:2012 — 29 стр.
DIN EN ISO 898-5:2012-09
Действует
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012); German version EN ISO 898-5:2012 — 23 стр.
DIN EN ISO 898-6:2010-02
Отменен
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread (ISO/DIS 898-6:2009); German version prEN ISO 898-6:2009
DIN EN ISO 14780/A1:2018-10
Отменен
Solid biofuels - Sample preparation - Amendment 1 (ISO 14780:2017/DAM 1:2018); German and English version EN ISO 14780:2017/prA1:2018
DIN EN ISO 15023-2:2019-07
Действует
Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 2: Determination of properties (ISO 15023-2:2019); German version EN ISO 15023-2:2019
DIN EN ISO 23208/A1:2019-10
Отменен
Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1 (ISO 23208:2017/DAM 1:2019); German and English version EN ISO 23208:2019/prA1:2019
DIN EN ISO 27020:2019-12
Действует
Dentistry - Brackets and tubes for use in orthodontics (ISO 27020:2019); German version EN ISO 27020:2019 — 20 стр.
DIN ISO 2859-1:2014-08
Действует
Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 + Cor. 1:2001 + Amd.1:2011); Text in German and English — 195 стр.
DIN EN 26157-3:1991-12
Действует
Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991 — 16 стр.
DIN EN ISO 3506-1:2018-02
Отменен
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified property classes - Coarse pitch thread and fine pitch thread (ISO/DIS 3506-1:2017); German and English version prEN ISO 3506-1:2017
DIN EN ISO 3506-2:2018-02
Отменен
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified property classes - Coarse pitch thread and fine pitch thread (ISO/DIS 3506-2:2017); German and English version prEN ISO 3506-2:2017
DIN EN ISO 3506-3:2010-04
Действует
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009); German version EN ISO 3506-3:2009 — 24 стр.
DIN ISO 3534-2:2013-12
Действует
Statistics - Vocabulary and symbols - Part 2: Applied statistics (ISO 3534-2:2006); Text in German and English — 125 стр.
DIN EN ISO 4042:2019-12
Отменен
Fasteners - Electroplated coating systems (ISO/DIS 4042:2019); German and English version prEN ISO 4042:2019
ÖNORM EN ISO 4759-1:2001-05
Действует
Tolerances for fasteners - Part 1: Bolts, screws studs and nuts - Product grades A, B, and C (ISO 4759-1:2000)
DIN EN ISO 4759-3:2016-12
Действует
Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016); German version EN ISO 4759-3:2016 — 20 стр.
ISO 6157-1:1988
Действует
Fasteners surface discontinuities; part 1: bolts, screws and studs for general requirements — 12 стр.
DIN EN ISO 6157-2:2004-10
Действует
Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995); German version EN ISO 6157-2:2004 — 18 стр.
ISO 6157-3:1988
Действует
Fasteners; surface discontinuities; part 3: bolts, screws and studs for special requirements — 16 стр.
DIN EN 28839:1991-12
Действует
Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991 — 8 стр.
ÖNORM EN ISO 7085:2000-02
Действует
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (ISO 7085:1999)
DIN EN ISO 8402:1995-08
Отменен
Quality management and quality assurance - Vocabulary (ISO 8402:1994); Trilingual version EN ISO 8402:1995 — 34 стр.
ISO 8839:1986
Действует
Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals — 8 стр.
DIN ISO 8992:2005-09
Действует
Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) — 9 стр.
DIN EN ISO 898-1:1999-11
Отменен
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999 — 28 стр.
DIN EN ISO 898-5:1998-10
Отменен
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998 — 12 стр.
DIN EN ISO 898-6:1996-02
Отменен
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values; fine pitch thread (ISO 898-6:1994); German version EN ISO 898-6:1995 — 10 стр.
DIN EN ISO 1478:1999-12
Действует
Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999 — 5 стр.
DIN EN ISO 2320:1998-03
Отменен
Prevailing torque type steel hexagon nuts - Mechanical and performance properties (ISO 2320:1997); German version EN ISO 2320:1997 — 20 стр.
DIN EN ISO 3269:2020-01
Действует
Fasteners - Acceptance inspection (ISO 3269:2019); German version EN ISO 3269:2019 — 20 стр.
DIN ISO 3269:1992-12
Отменен
Fasteners; acceptance inspection; identical with ISO 3269:1988 — 9 стр.

На этот документ ссылаются

DIN 80705:2018-07
Действует
Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread — 8 стр.
DIN EN ISO 21269:2004-06
Отменен
Hexagon socket head cap screws with metric fine pitch thread (ISO 21269:2004); German version EN ISO 21269:2004 — 15 стр.
DIN EN ISO 21670:2004-01
Отменен
Hexagon weld nuts with flange (ISO 21670:2003); German version EN ISO 21670:2003 — 11 стр.
DIN EN ISO 21670:2014-09
Действует
Fasteners - Hexagon weld nuts with flange (ISO 21670:2014); German version EN ISO 21670:2014 — 12 стр.
DIN ISO 7045:1990-08
Отменен
Cross recessed pan head screws; product grade A; identical with ISO 7045:1983 — 5 стр.
DIN ISO 7047:1990-08
Отменен
Cross recessed raised countersunk head screws (common head style); product grade A; identical with ISO 7047:1983 — 6 стр.
DIN ISO 4018:1989-10
Отменен
Hexagon head screws; product grade C; identical with ISO 4018:1988 — 8 стр.
DIN ISO 4016:1987-09
Отменен
Hexagon head bolts; product grade C; identical with ISO 4016, edition 1979 — 8 стр.
DIN ISO 8748:1991-04
Отменен
Spring-type straight pins; coiled, heavy duty; identical with ISO 8748:1987 — 4 стр.
DIN ISO 4017:1987-09
Отменен
Hexagon head screws; product grades A and B; identical with ISO 4017, edition 1979 — 9 стр.
DIN ISO 4036:1987-10
Отменен
Hexagon thin nuts; product grade B (unchamfered); identical with ISO 4036, edition 1979 (status as of 06.1979) — 6 стр.
DIN ISO 8676:1990-01
Отменен
Hexagon head screws with metric fine pitch thread; product grades A and B; Identical with ISO 8676:1988 — 10 стр.
DIN ISO 8673:1990-01
Отменен
Hexagon nuts, style 1, with metric fine pitch thread; product grades A and B; identical with ISO 8673:1988 — 6 стр.
DIN ISO 8674:1990-01
Отменен
Hexagon nuts, style 2, with metric fine pitch thread; product grades A and B; identical with ISO 8674:1988 — 5 стр.
DIN ISO 8765:1990-01
Отменен
Hexagon head bolts with metric fine pitch thread; product grades A and B; identical with ISO 8765:1988 — 10 стр.
DIN ISO 8992:2005-09
Действует
Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) — 9 стр.
DIN ISO 3269:1992-12
Отменен
Fasteners; acceptance inspection; identical with ISO 3269:1988 — 9 стр.
DIN ISO 4035:1987-10
Отменен
Hexagon thin nuts; product grades A and B (chamfered); identical with ISO 4035, edition 1986 — 6 стр.
DIN ISO 7046:1990-08
Отменен
Cross recessed countersunk flat head screws (common head style); product grade A and property class 4.8 only; identical with ISO 7046:1983 — 6 стр.
DIN ISO 8750:1991-04
Отменен
Spring-type straight pins; coiled, standard duty; identical with ISO 8750:1987 — 4 стр.
DIN ISO 4017:1989-10
Отменен
Hexagon head screws; product grades A and B; identical with ISO 4017:1988 — 9 стр.
DIN ISO 4016:1989-10
Отменен
Hexagon head bolts; product grade C; identical with ISO 4016:1988 — 8 стр.
DIN ISO 4034:1987-10
Отменен
Hexagon nuts; style 1; product grade C; identical with ISO 4034, edition 1986 — 6 стр.
DIN ISO 2009:1990-08
Отменен
Slotted countersunk head screws (common head style); product grade A; identical with ISO 2009:1983 — 6 стр.
DIN ISO 4014:1989-09
Отменен
Hexagon head bolts; product grades A and B; identical with ISO 4014:1988 — 12 стр.
DIN ISO 4014:1987-09
Отменен
Hexagon head bolts; product grades A and B; identical with ISO 4014, edition 1979 — 8 стр.
DIN ISO 2010:1990-08
Отменен
Slotted raised countersunk head screws (common head style); product grade A; identical with ISO 2010:1983 — 6 стр.
DIN ISO 4032:1987-10
Отменен
Hexagon nuts; style 1; product grades A and B; idendtical with ISO 4032, edition 1986 — 6 стр.
DIN ISO 1580:1990-08
Отменен
Slotted pan head screws; product grade A; identical with ISO 1580:1983 — 5 стр.
DIN ISO 4018:1987-09
Отменен
Hexagon head screws; product grade C; identical with ISO 4018, edition 1979 — 8 стр.
DIN ISO 8992:1992-12
Отменен
Fasteners; general requirements for bolts, screws, studs and nuts; identical with ISO 8992:1986 — 3 стр.
DIN ISO 8675:1990-01
Отменен
Hexagon thin nuts with metric fine pitch thread; product grades A and B; identical with ISO 8675:1988 — 7 стр.
DIN EN ISO 13337:2009-10
Действует
Spring-type straight pins - Slotted, light duty (ISO 13337:2009); German version EN ISO 13337:2009 — 12 стр.
DIN EN ISO 12474:2011-01
Действует
Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010); German version EN ISO 12474:2010 — 15 стр.
DIN EN ISO 14580:2011-06
Действует
Hexalobular socket cheese head screws (ISO 14580:2011); German version EN ISO 14580:2011 — 12 стр.
DIN EN ISO 16583:2003-04
Действует
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002); German version EN ISO 16583:2002 — 10 стр.
DIN EN ISO 15976:2003-04
Действует
Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002); German version EN ISO 15976:2002 — 8 стр.
DIN EN ISO 15980:2003-04
Действует
Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002); German version EN ISO 15980:2002 — 10 стр.
DIN EN ISO 15977:2011-02
Действует
Open end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15977:2002); German version EN ISO 15977:2002 — 13 стр.
DIN EN ISO 14579:2011-06
Действует
Hexalobular socket head cap screws (ISO 14579:2011); German version EN ISO 14579:2011 — 16 стр.
DIN EN ISO 14586:2011-05
Действует
Hexalobular socket countersunk head tapping screws (ISO 14586:2011); German version EN ISO 14586:2011 — 11 стр.
DIN EN ISO 15977:2003-04
Отменен
Open end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15977:2002); German version EN ISO 15977:2002 — 10 стр.
DIN EN ISO 14583:2002-05
Отменен
Hexalobular socket pan head screws (ISO 14583:2001); German version EN ISO 14583:2001 — 9 стр.
DIN EN ISO 14581:2014-02
Действует
Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013); German version EN ISO 14581:2013 — 13 стр.
DIN EN ISO 15481:2000-02
Действует
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999 — 7 стр.
DIN EN ISO 14579:2002-05
Отменен
Hexalobular socket head cap screws (ISO 14579:2001); German version EN ISO 14579:2001 — 12 стр.
DIN EN ISO 14587:2011-05
Действует
Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011); German version EN ISO 14587:2011 — 11 стр.
DIN EN ISO 15979:2003-04
Действует
Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002); German version EN ISO 15979:2002 — 10 стр.
DIN EN ISO 14585:2011-05
Действует
Hexalobular socket pan head tapping screws (ISO 14585:2011); German version EN ISO 14585:2011 — 11 стр.
DIN EN ISO 14583:2011-06
Действует
Hexalobular socket pan head screws (ISO 14583:2011); German version EN ISO 14583:2011 — 12 стр.
DIN EN ISO 14587:2002-05
Отменен
Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2001); German version EN ISO 14587:2001 — 9 стр.
DIN EN ISO 15483:2000-02
Действует
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999 — 8 стр.
DIN EN ISO 14586:2002-05
Отменен
Hexalobular socket countersunk head tapping screws (ISO 14586:2001); German version EN ISO 14586:2001 — 9 стр.
DIN EN ISO 15973:2001-08
Действует
Closed end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15973:2000); German version EN ISO 15973:2000 — 7 стр.
DIN EN ISO 14584:2002-05
Отменен
Hexalobular socket raised countersunk head screws (ISO 14584:2001); German version EN ISO 14584:2001 — 9 стр.
DIN EN ISO 14582:2014-02
Действует
Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013); German version EN ISO 14582:2013 — 13 стр.
DIN EN ISO 16582:2003-04
Действует
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002); German version EN ISO 16582:2002 — 10 стр.
DIN EN ISO 14585:2002-05
Отменен
Hexalobular socket pan head tapping screws (ISO 14585:2001); German version EN ISO 14585:2001 — 9 стр.
DIN EN ISO 15983:2003-04
Действует
Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002); German version EN ISO 15983:2002 — 9 стр.
DIN EN ISO 16585:2003-04
Действует
Closed end blind rivets with break pull mandrel and protruding head - A2/SSt (ISO 16585:2002); German version EN ISO 16585:2002 — 8 стр.
DIN EN ISO 16426:2003-06
Действует
Fasteners - Quality assurance system (ISO 16426:2002); German version EN ISO 14426:2002 — 15 стр.
DIN EN ISO 15981:2003-04
Действует
Open end blind rivets with break pull mandrel and protruding head - AlA/AlA (ISO 15981:2002); German version EN ISO 15981:2002 — 9 стр.
DIN EN ISO 15975:2003-04
Действует
Closed end blind rivets with break pull mandrel and protruding head - Al/AlA (ISO 15975:2002); German version EN ISO 15975:2002 — 8 стр.
DIN EN ISO 15978:2003-04
Действует
Open end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15978:2002); German version EN ISO 15978:2002 — 9 стр.
DIN EN ISO 15974:2001-08
Действует
Closed end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15974:2000); German version EN ISO 15974:2000 — 7 стр.
DIN EN ISO 16584:2003-04
Действует
Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCi/SSt (ISO 16584:2002); German version EN ISO 16584:2002 — 10 стр.
DIN EN ISO 15482:2000-02
Действует
Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999); German version EN ISO 15482:1999 — 8 стр.
DIN EN ISO 15984:2003-04
Действует
Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002); German version EN ISO 15984:2002 — 9 стр.
DIN EN ISO 14584:2011-06
Действует
Hexalobular socket raised countersunk head screws (ISO 14584:2011); German version EN ISO 14584:2011 — 12 стр.
DIN EN ISO 14580:2002-05
Отменен
Hexalobular socket cheese head screws (ISO 14580:2001); German version EN ISO 14580:2001 — 9 стр.
DIN EN ISO 15982:2003-04
Действует
Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA (ISO 15982:2002); German version EN ISO 15982:2002 — 9 стр.
DIN 2093:2013-12
Отменен
Disc springs - Quality specifications - Dimensions — 18 стр.
DIN 2093:2013-02
Отменен
Disc springs - Quality specifications - Dimensions — 18 стр.
DIN 2509:2016-05
Действует
Fasteners - Double end studs — 10 стр.
DIN 2510-6:2013-05
Действует
Bolted connections with waisted shank - Part 6: Cap nuts — 9 стр.
DIN 2093:2006-03
Отменен
Disc springs - Quality specifications - Dimensions — 19 стр.
DIN 21057-11:2017-04
Действует
Pipe classes for process plants - Part 11: Technical delivery conditions for pipe components of austenitic stainless steels of material group 8.1 — 72 стр.
DIN 21057-10:2017-04
Действует
Pipe classes for process plants - Part 10: Technical delivery conditions for pipe components of non-alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.1 — 82 стр.
DIN 21057-12:2017-04
Действует
Pipe classes for process plants - Part 12: Technical delivery conditions for pipe components of non alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.2 and 5.1 — 77 стр.
DIN 25193:2003-06
Действует
Railway vehicles - Mushroom head anchor screws with metric ISO thread - Class C — 4 стр.
DIN 25195:2003-06
Действует
Railway vehicles - Countersunk bolts with double nip with metric ISO thread - Class C — 4 стр.
DIN 34819:2008-05
Действует
Hexalobular socket raised head tapping screws with collar — 7 стр.
DIN 34800:2016-02
Отменен
Bolts and screws with external hexalobular driving feature with small flange — 13 стр.
DIN 34802:2001-03
Отменен
Hexalobular socket heat cap screw with large driving feature — 7 стр.
DIN 34800:2000-04
Отменен
Bolts and screws with external hexalobular driving feature with small flange — 8 стр.
DIN 34817:2017-04
Действует
Weld screws with metric thread — 9 стр.
DIN 34818:2002-12
Действует
Sheet spring nuts with tappping screw thread — 3 стр.
DIN 34827:2016-03
Отменен
Hexalobular socket set screws — 8 стр.
DIN 34805-2:2018-12
Действует
Button head screws - Part 2: Screws with collar and driving feature hexalobular socket — 9 стр.
DIN 34805-1:2018-12
Действует
Button head screws - Part 1: Driving feature hexalobular socket — 9 стр.
DIN 34800:2016-11
Отменен
Bolts and screws with external hexalobular driving feature with small flange — 13 стр.
DIN 34819:2002-10
Отменен
Hexalobular socket raised head tapping screws with collar — 4 стр.
DIN 34820:2004-05
Отменен
Plain washers, chamfered, for steel structures — 4 стр.
DIN 34827:2016-11
Действует
Hexalobular socket set screws — 8 стр.
DIN 34825:2018-09
Действует
Cylindrical head screws with inner contact flange - Driving feature 12 point socket — 8 стр.
DIN 34817:2001-04
Отменен
Weld screws with metric thread — 6 стр.
DIN 34800:2005-09
Отменен
Bolts and screws with external hexalobular driving feature with small flange — 10 стр.
DIN 34827:2005-11
Отменен
Hexalobular socket set screws — 5 стр.
DIN EN ISO 10511:2013-05
Действует
Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012); German version EN ISO 10511:2012 — 11 стр.
DIN EN ISO 8746:1998-03
Действует
Grooved pins with round head (ISO 8746:1997); German version EN ISO 8746:1997 — 6 стр.