Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020); German version EN ISO 75-1:2020— 18 стр.
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013); German version EN ISO 75-2:2013— 16 стр.
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004) (consolidated version)
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:2017); German version EN ISO 294-1:2017
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020— 17 стр.
Protective clothing for users of hand-held chain-saws - Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018); German version EN ISO 11393-4:2019— 31 стр.
Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) - AMENDMENT 1: Carbon footprint, carbon neutral (ISO 14021:2016/DAM 1:2020); German and English version EN ISO 14021:2016/prA1:2020
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014); German version EN ISO 22007-6:2015— 20 стр.
Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO/FDIS 11357-4:2014); German version FprEN ISO 11357-4:2014— 18 стр.
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015); German version EN ISO 16396-1:2015— 26 стр.
Paints and varnishes - Test method for evaluation of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage— 28 стр.
Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011 + Amd.1:2016); German version EN ISO 1043-1:2011 + A1:2016— 27 стр.
Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications (ISO 15023-1:2017); German version EN ISO 15023-1:2017— 17 стр.
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003 + Amd 1:2016 + Cor 1:2004); German version EN ISO 15493:2003 + A1:2017— 77 стр.
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20568-1:2017); German version EN ISO 20568-1:2017— 27 стр.
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017); German version EN ISO 20568-2:2017— 29 стр.
Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017— 29 стр.
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017); German version EN ISO 22007-1:2017— 27 стр.
Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018); German version EN ISO 11357-6:2018— 22 стр.
Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)— 12 стр.
Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018); German version EN ISO 10927:2018— 20 стр.
Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive (ISO 22633:2019); German version EN ISO 22633:2019— 15 стр.
Paints and varnishes - Test method for evaluation of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage— 28 стр.
Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013), German version EN ISO 11357-2:2014— 11 стр.
Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019); German version EN ISO 11833-1:2019— 26 стр.
Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014); German version EN ISO 11357-4:2014— 18 стр.
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015); German version EN ISO 15494:2015— 117 стр.
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)— 119 стр.
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)— 19 стр.
Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015); German version EN ISO 11357-7:2015— 20 стр.
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013); German and English version EN ISO 15874-1:2013— 31 стр.
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017); German version EN ISO 16396-2:2017— 21 стр.
