Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2010); German version EN ISO 2931:2010— 13 стр.
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996/Amd. 1:2001) (Amendment)
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012— 18 стр.
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003/DAM 1:2012); German version EN ISO 899-2:2003/prA1:2012
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999— 7 стр.
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996); German version EN ISO 294-1:1998— 16 стр.
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996 + Amd. 1:2005) (consolidated version)
Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of mulitpurpose test specimens (ISO 10724-1:1998)
Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998); German version EN ISO 10724-1:2001— 18 стр.
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013); German version EN ISO 75-2:2013— 16 стр.
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010— 30 стр.
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997, including Technical Corrigendum 1:1998 + Amd 1:2011) (consolidated version)
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements; German version EN 14598-3:2005— 23 стр.
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements; German version EN 14598-2:2005— 18 стр.
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012— 18 стр.
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000 + Amd.1:2005); German version EN ISO 179-1:2000 + A1:2005— 26 стр.
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:1997 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 1872-2:1997 + A1:2000— 9 стр.
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000); German version EN ISO 179-1:2000— 19 стр.
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010— 30 стр.
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:1997); German version EN ISO 1873-2:1997— 8 стр.
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:1993); German version EN ISO 75-3:1996— 4 стр.
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:1997 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 1873-2:1997 + A1:2000— 9 стр.
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:1997); German version EN ISO 1872-2:1997— 8 стр.
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993, including Corr. 1:1994); German version EN ISO 527-2:1996— 8 стр.
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:1993); German version EN ISO 75-2:1996— 5 стр.
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2004); German version EN ISO 75-1:2004— 19 стр.
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:1995); German version EN ISO 1874-2:1995— 9 стр.
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2004); German version EN ISO 75-2:2004— 18 стр.
Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006); German version EN ISO 22088-4:2006— 18 стр.
Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 2: Constant tensile load method (ISO 22088-2:2006); German version EN ISO 22088-2:2006— 15 стр.
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:1996); German version EN ISO 7391-2:1999— 10 стр.
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:1997); German version EN ISO 7792-2:2004— 15 стр.
Plastics - Determination of environmental stress cracking (ESC) - Constant-tensile-stress method (ISO 6252:1992); German version EN ISO 6252:1997— 11 стр.
Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:1994); German version EN ISO 6402-2:1999— 10 стр.
Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000); German version EN ISO 3672-2:2001— 19 стр.
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012); German version EN ISO 3673-2:2012— 14 стр.
Plastics - Determination of environmental stress cracking (ESC) - Ball or pin impression method (ISO 4600:1992); German version EN ISO 4600:1997 — 10 стр.
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995); German version EN ISO 4613-2:1995— 7 стр.
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:1997); German version EN ISO 2898-2:1999— 8 стр.
Plastics - Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:1994); German version EN ISO 2580-2:1999— 10 стр.
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:1994, including Technical Corrigendum 1:1995); German version EN ISO 2897-2:1999— 9 стр.
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996); German version EN ISO 4589-2:1999— 22 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:1998); German version EN ISO 10350-1:2000— 17 стр.
Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998); German version EN ISO 10724-1:2001— 18 стр.
Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:1994); German version EN ISO 10366-2:1999— 11 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007); German version EN ISO 10350-1:2008— 16 стр.
Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:1995 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 8986-2:2000— 6 стр.
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:1995); German version EN ISO 11403-2:1999— 9 стр.
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998); German version EN ISO 11542-2:1998— 13 стр.
Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:1994); German version EN ISO 11403-1:1999— 12 стр.
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2004); German version EN ISO 11403-2:2004— 17 стр.
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999); German version EN ISO 14527-2:1999— 12 стр.
Plastics - Polyketone(PK)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000); German version EN ISO 15526-2:2004— 14 стр.
Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999— 17 стр.
Plastics -Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2 : Preparation of test specimens and determination of properties (ISO 14910-2:1997); German version EN ISO 14910-2:2006— 11 стр.
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999— 12 стр.
Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999); German version EN ISO 14529-2:1999— 12 стр.
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013); German version EN ISO 14910-2:2013— 28 стр.
Plastics - Poly(phenylene ether)(PPE)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2000); German version EN ISO 15103-2:2004— 14 стр.
Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999); German version EN ISO 14528-2:1999— 12 стр.
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999— 12 стр.
Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999); German version EN ISO 15252-2:1999— 12 стр.
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012); German version EN ISO 7792-2:2012— 13 стр.
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996 + Amd. 1:2005) German version EN ISO 4589-2:1999 + A1:2006— 36 стр.
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012); German version EN ISO 1874-2:2012— 18 стр.
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013); German version EN ISO 14910-2:2013— 28 стр.
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007); German version EN ISO 15103-2:2007— 14 стр.
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003); German version EN ISO 2580-2:2003— 16 стр.
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003); German version EN ISO 2897-2:2003— 14 стр.
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003); German version EN ISO 10366-2:2003— 16 стр.
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:2003); German version EN ISO 6402-2:2003— 16 стр.
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012); German version EN ISO 11403-2:2012— 16 стр.
