Standard Test Method for Determining Average Bonding Peel Strength Between the Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners— 3 стр.
Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion); German version EN 13249:2016— 48 стр.
Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments); German version EN 13253:2016— 48 стр.
Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams; German version EN 13254:2016— 49 стр.
Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures; German version EN 13256:2016— 41 стр.
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites; German version EN 13493:2018— 67 стр.
Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head; German version EN 16416:2013— 16 стр.
Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids; German version EN 16993:2018— 66 стр.
Clay geosynthetic barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures); German version EN 16994:2018— 55 стр.
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997)
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011); German version EN ISO 1133-1:2011— 33 стр.
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011); German version EN ISO 1133-2:2011— 24 стр.
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO/DIS 1183-1:2018); German and English version prEN ISO 1183-1:2018
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing; German version EN 495-5:2013— 11 стр.
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature; German version EN 1109:2013— 12 стр.
Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety; German and English version prEN 12965:2018
Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing; German version EN 1844:2013— 10 стр.
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets for roof waterproofing; German and English version prEN 1849-2:2017
Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test; German version EN 12225:2000— 7 стр.
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12311-2:2013— 12 стр.
Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures; German version EN 13251:2016— 47 стр.
Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures; German version EN 13491:2018— 68 стр.
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment; German version EN 13492:2018— 67 стр.
Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers; German version CEN/TS 14417:2014
Geosynthetic barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers; German version CEN/TS 14418:2014
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995 + Corr 1:1998 + Corr 2:2001) (includes Corrigendum AC:1998 + AC:2002); German version EN ISO 527-3:1995 + AC:1998 + AC:2002— 7 стр.
Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO/DIS 1183-2:2018); German and English version prEN ISO 1183-2:2018
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999— 7 стр.
Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO/DIS 13426-1:2016); German and English version prEN ISO 13426-1:2016
Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2016); German version EN ISO 9863-1:2016— 11 стр.
Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005); German version EN ISO 9864:2005— 7 стр.
Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO/DIS 12957-1:2018); German and English version prEN ISO 12957-1:2018
Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005); German version EN ISO 12957-2:2005— 16 стр.
Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO/DIS 13438:2016); German and English version prEN ISO 13438:2016
Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005); German version EN ISO 13426-2:2005— 15 стр.
Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids; German version EN 16993:2018— 66 стр.
Clay geosynthetic barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures); German version EN 16994:2018— 55 стр.
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment; German version EN 13492:2018— 67 стр.
Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures; German version EN 13491:2018— 68 стр.
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites; German version EN 13493:2013— 44 стр.
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment; German version EN 13492:2013— 42 стр.
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites; German version EN 13493:2018— 67 стр.
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures; German version EN 13491:2013— 44 стр.
