Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011); German version EN ISO 1133-1:2011— 33 стр.
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022); German version EN ISO 1133-1:2022
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:2012); German version EN ISO 1622-1:2012— 11 стр.
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995); German version EN ISO 1622-2:1999— 9 стр.
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002)
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003); German version EN ISO 2580-2:2003— 16 стр.
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997); German version EN ISO 2897-1:1999— 6 стр.
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003); German version EN ISO 2897-2:2003— 14 стр.
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - AMENDMENT 2: Parameters Xsm and Xc (ISO 4287:1997/DAM 2:2013); German version EN ISO 4287:1997/prA2:2013
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995 + AMD 1:2004); German version EN ISO 4613-2:1995 + A1:2004— 10 стр.
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 4894-1:1997); German version EN ISO 4894-1:1999— 7 стр.
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995); German version EN ISO 4894-2:1999— 10 стр.
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 6402-1:2002)
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:2003); German version EN ISO 6402-2:2003— 16 стр.
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:2006); German version EN ISO 7391-1:2006— 12 стр.
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006); German version EN ISO 7391-2:2006— 11 стр.
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998); German version EN ISO 8257-1:2006, Corrigenda to DIN EN ISO 8257-1:2006-06— 2 стр.
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001); German version EN ISO 8257-2:2006— 11 стр.
Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:2009); German version EN ISO 8986-1:2009— 14 стр.
Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009); German version EN ISO 8986-2:2009— 14 стр.
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1 : Designation system and basis for specifications (ISO 9988-1:2004); German version EN ISO 9988-1:2006— 12 стр.
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006); German version EN ISO 9988-2:2015— 12 стр.
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 10366-1:2002)
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003); German version EN ISO 10366-2:2003— 16 стр.
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015 + Amd 1:2020) (consolidated version)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013 + Amd 1:2022); German and English version EN ISO 15874-1:2013 + A1:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013 + Amd 1:2018 + Amd 2:2021); German and English version EN ISO 15874-3:2013 + A1:2018 + A2:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017 + Amd 1:2020 + Amd 2:2021); German and English version EN ISO 15876-3:2017 + A1:2020 + A2:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009) (consolidated version)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes (ISO 22391-2:2009 + Amd.1:2020) (consolidated version)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009 + Amd 1:2020 + Amd 2:2021); German and English version EN ISO 22391-3:2009 + A1:2020 + A2:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system (ISO 22391-5:2009 + Amd.1:2020, korrigierte Fassung 2021-02) (consolidated version)
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005); German version EN ISO 1133:2005— 24 стр.
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method; (ISO/DIS 1133-1:2010); German version prEN ISO 1133-1:2010
Polyethylene (PE) pipes - PE-HD for pressureless applications - General quality requirements, dimensions and testing; Text in German and English— 21 стр.
Pipes and fittings made of thermoplastic materials with profiled wall and smooth pipe inside - Large pipes over DN 1200 for underground installation - Part 2: Specifications for pipes and fittings— 32 стр.
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1872-1:1993); German version EN ISO 1872-1:1999— 10 стр.
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:1994); German version EN ISO 1622-1:1999— 6 стр.
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005); German version EN ISO 1133:2005— 24 стр.
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011); German version EN ISO 1133-2:2011— 24 стр.
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19069-1:2015); German version EN ISO 19069-1:2015— 17 стр.
Transportation chain for meat and meat products - Part 2: Rigid, stackable, reusable transport and storing crates made of plastics; Requirements and tests— 10 стр.
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2004); German version EN ISO 11403-2:2004— 17 стр.
Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013); German version EN ISO 13274:2013— 36 стр.
Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013 + Cor. 1:2014); German version EN ISO 13274:2013 + AC:2014— 36 стр.
Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014); English version EN ISO 12736:2014— 90 стр.
Plastics - Polyketone(PK)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000); German version EN ISO 15526-2:2004— 14 стр.
Plastics piping systems for industrial applications - Polybutylene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system; Metric series (ISO 15494:2003); German version EN ISO 15494:2003— 89 стр.
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007); German version EN ISO 1872-2:2007— 12 стр.
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers in traffic areas and deep underground installations; German version EN 13598-2:2009 + AC:2009— 26 стр.
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007); German version EN ISO 1873-2:2007— 13 стр.
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants; German version EN 12566-3:2016— 65 стр.
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants; English version EN 12566-3:2005+A2:2013— 50 стр.
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants; German and English version FprEN 12566-3:2015— 65 стр.
Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets; German version EN 845-1:2013+A1:2016— 62 стр.
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20568-1:2017); German version EN ISO 20568-1:2017— 27 стр.
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017); German version EN ISO 20568-2:2017— 29 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017); German version EN ISO 10350-1:2017— 22 стр.
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1852-1:2018— 39 стр.
Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids; German version EN 16993:2018— 66 стр.
Clay geosynthetic barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures); German version EN 16994:2018— 55 стр.
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment; German version EN 13492:2018— 67 стр.
Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures; German version EN 13491:2018— 68 стр.
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites; German version EN 13493:2018— 67 стр.
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 29988-2:2018); German version EN ISO 29988-2:2018— 14 стр.
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018); German version EN ISO 11298-3:2018— 28 стр.
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013); German and English version EN ISO 15874-3:2013— 47 стр.
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013); German and English version EN ISO 15874-2:2013— 51 стр.
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1451-1:2017+AC:2018— 52 стр.
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1451-1:2017— 51 стр.
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)— 20 стр.
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016); German version EN ISO 17855-2:2016— 20 стр.
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016); German version EN ISO 19069-2:2016— 18 стр.
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)— 18 стр.
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19062-2:2019); German version EN ISO 19062-2:2019— 20 стр.
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19065-2:2019); German version EN ISO 19065-2:2019— 19 стр.
Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/FDIS 21970-2:2019); German and English version prEN ISO 21970-2:2019— 17 стр.
Plastics - Polyketone (PK) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21970-1:2019); German version EN ISO 21970-1:2019— 17 стр.
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20557-2:2018)— 15 стр.
Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20558-2:2018); German version EN ISO 20558-2:2019— 14 стр.
Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21309-2:2019); German version EN ISO 21309-2:2019— 25 стр.
Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21309-1:2019); German version EN ISO 21309-1:2019— 15 стр.
Plastics - Polyketone (PK) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO/FDIS 21970-1:2019); German and English version prEN ISO 21970-1:2019— 17 стр.
Plastics - Polyketone (PK) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21970-1:2018); German version EN ISO 21970-1:2018— 17 стр.
Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21970-2:2018); German version EN ISO 21970-2:2018— 17 стр.
Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21970-2:2019); German version EN ISO 21970-2:2019— 17 стр.
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018); German version EN ISO 11299-3:2018— 28 стр.
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017); German and English version EN ISO 15876-2:2017— 48 стр.
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017); German and English version EN ISO 15876-3:2017— 46 стр.
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)— 119 стр.
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 29988-1:2018)— 18 стр.
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers; German version EN 13598-2:2016— 28 стр.
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A; German version EN 13476-2:2018— 57 стр.
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B; German version EN 13476-3:2018— 58 стр.
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013 + Amd. 1:2018); German and English version EN ISO 15874-3:2013 + A1:2018— 49 стр.
Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2018); German version EN ISO 15527:2018— 21 стр.
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012); German version EN ISO 11403-2:2012— 16 стр.
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013 + Amd. 1:2018); German and English version EN ISO 15874-2:2013 + A1:2018— 53 стр.