Road vehicles. Ergonomic aspects of transport information and control systems. Simulated lane change test to assess in-vehicle secondary task demand— 52 стр.
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 1: General for requirements, verification and calibration of tension, compression and flexion testing machines
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996); German version EN ISO 294-1:1998— 16 стр.
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004); German version EN ISO 7500-1:2004— 24 стр.
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:2017); German version EN ISO 294-1:2017
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993 including Corr 1:1994); German version EN ISO 527-1:1996— 9 стр.
Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods; German version EN 16240:2013— 51 стр.
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers; German version EN 16245-2:2013— 22 стр.
Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods; German version EN 15542:2008— 23 стр.
Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures; German version EN 16129:2013— 147 стр.
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012— 18 стр.
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2006); German version EN ISO 1874-2:2006— 14 стр.
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993 including Corr 1:1994); German version EN ISO 527-1:1996— 9 стр.
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993, including Corr. 1:1994); German version EN ISO 527-2:1996— 8 стр.
Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006); English version CEN ISO/TS 24817:2011— 83 стр.
Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings; German version EN 295-4:2013— 33 стр.
Light transmitting profiled plastic sheeting for single skin roofing - Part 5: Specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets; German version EN 1013-5:2000— 6 стр.
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection; German version EN 1504-5:2013— 42 стр.
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements for special fittings, adapters and compatible accessories; German version EN 295-4:1995— 14 стр.
Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods; German version EN 1013:2012+A1:2014— 64 стр.
Light transmitting profiled plastic sheeting for single skin roofing - Part 4: Specific requirements, test methods and performance of polycarbonate (PC) sheets; German version EN 1013-4:2000— 6 стр.
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection; German version EN 1504-5:2004— 38 стр.
Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods; German version EN 1013:2012— 60 стр.
Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U); German version EN 124-6:2015— 46 стр.
Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods; German version EN 1873:2005— 50 стр.
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes; German version EN 13566-7:2007— 24 стр.
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment— 38 стр.
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites; German version EN 13493:2005— 40 стр.
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification; German version EN 13483:2013— 35 стр.
Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures; German version EN 12864:2001 + A1:2003 + A2:2005— 130 стр.
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures; German version EN 13785:2005+A1:2008— 142 стр.
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:1997); German version EN ISO 7792-2:2004— 15 стр.
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015); German and English version EN ISO 6259-1:2015— 33 стр.
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties (ISO 3673-2:1999); German version EN ISO 3673-2:1999— 12 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007); German version EN ISO 10350-1:2008— 16 стр.
Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2001); German version EN ISO 11403-1:2003— 22 стр.
Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:1999); German version EN ISO 11403-3:2001— 19 стр.
Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008); German version EN ISO 12215-5:2008— 124 стр.
Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2007); German version EN ISO 11833-1:2007— 20 стр.
Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO/FDIS 11403-3:2013); German version FprEN ISO 11403-3:2013— 21 стр.
Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014); English version EN ISO 12736:2014— 90 стр.
Plastics - Polyketone(PK)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000); German version EN ISO 15526-2:2004— 14 стр.
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015); German version EN ISO 16396-1:2015— 26 стр.
Plastics -Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2 : Preparation of test specimens and determination of properties (ISO 14910-2:1997); German version EN ISO 14910-2:2006— 11 стр.
Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods; German version EN 1873:2014+A1:2016— 84 стр.
Prefabricated accesories for roofing - Individual rooflights of plastics - Product specification and test methods; German version EN 1873:2014— 80 стр.
Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014); German and English version FprEN ISO 17296-3:2016— 20 стр.
Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014); German version EN ISO 17296-3:2016— 20 стр.
Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets; German version EN 13160-7:2016— 56 стр.
Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent; German version EN 12566-6:2013— 43 стр.
Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets; German version EN 845-1:2013+A1:2016— 62 стр.
Standard terminology for additive manufacturing - Coordinate systems and test methodologies (ISO/ASTM 52921:2013); German version EN ISO/ASTM 52921:2016— 22 стр.
Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method; German version EN 13587:2010— 10 стр.
Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW; German version EN 15502-2-1:2012— 89 стр.
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017); German version EN ISO 22007-4:2017— 23 стр.
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:2006); German version EN ISO 12086-2:2006— 56 стр.
Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer; German and English version FprEN 4702-05:2017— 23 стр.
Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking; German and English version EN 4702-03:2017— 29 стр.
Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking; German and English version FprEN 4702-03:2017— 29 стр.
Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer; German and English version EN 4702-05:2017— 23 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007 + Amd 1:2014); German version EN ISO 10350-1:2008 + A1:2014— 16 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017); German version EN ISO 10350-1:2017— 22 стр.
