DIN EN ISO 286-1:2010-11

Отменен

Geometrical product specification (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010) — 49 стр.

Описание Изменения Ссылки Версии

Ссылочные документы

DIN EN ISO 1:2002-10

Отменен

Geometrical product specifications (GPS) - Standard reference temperature for geometrical product specifications and verification (ISO 1:2002); German version EN ISO 1:2002 — 7 стр.

DIN EN ISO 286-2:2010-11

Отменен

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010) — 59 стр.

DIN EN ISO 1101:2008-08

Отменен

Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004); German version EN ISO 1101:2005 — 66 стр.

DIN EN ISO 1302:2002-06

Действует

Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002); German version EN ISO 1302:2002 — 51 стр.

DIN EN ISO 2692:2007-04

Отменен

Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006); German version EN ISO 2692:2006 — 47 стр.

DIN EN ISO 4759-1:2001-04

Действует

Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 — 65 стр.

DIN EN ISO 14253-1:1999-03

Отменен

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998); German version EN ISO 14253-1:1998 — 17 стр.

DIN EN ISO 14405-1:2009-09

Отменен

Geometrical Product Specification (GPS) - Dimensional Tolerancing - Part 1: Linear Sizes (ISO/DIS 14405-1:2009); German version prEN ISO 14405-1:2009

DIN EN ISO 14660-1:1999-11

Отменен

Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions (ISO 14660-1:1999); German version EN ISO 14660-1:1999 — 8 стр.

DIN EN ISO 14660-2:1999-11

Отменен

Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999); German version EN ISO 14660-2:1999 — 11 стр.

DIN EN ISO 17450-1:2009-07

Отменен

Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO/DIS 17450-1:2009); German version prEN ISO 17450-1:2009

DIN EN ISO 17450-2:2009-07

Отменен

Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators and uncertainties (ISO/DIS 17450-2:2009); German version prEN ISO 17450-2:2009

DIN ISO 2768-1:1991-06

Действует

General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989 — 5 стр.

DIN ISO 3534-1:2009-10

Действует

Statistics - Vocabulary and symbols - Part 1: General statistical terms and terms used in probability (ISO 3534-1:2006); Text in German and English — 96 стр.

DIN ISO 3534-2:2010-02

Отменен

Statistics - Vocabulary and symbols - Part 2: Applied statistics (ISO 3534-2:2006); Text in German and English

ÖNORM EN ISO 286-2:2019-11

Действует

DIN EN ISO 1101:2017-09

Действует

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017); German version EN ISO 1101:2017

DIN ISO 13022:2014-06

Действует

Medical products containing viable human cells - Application of risk management and requirements for processing practices (ISO 13022:2012) — 62 стр.

ISO/R 1938:1971

Заменен

ISO system of limits and fits -- Part II : Inspection of plain workpieces — 28 стр.

DIN EN ISO 2692:2019-07

Отменен

Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO/DIS 2692:2019); German and English version prEN ISO 2692:2019

ÖNORM EN ISO 4759-1:2001-05

Действует

Tolerances for fasteners - Part 1: Bolts, screws studs and nuts - Product grades A, B, and C (ISO 4759-1:2000)

DIN EN ISO 14253-1:2018-07

Действует

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017) — 31 стр.

DIN EN ISO 14405-1:2017-07

Действует

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016) — 68 стр.

ISO/TR 14638:1995

Действует

Geometrical product specification (GPS) - Masterplan — 36 стр.

ÖNORM EN ISO 14660-1:1999-12

Действует

Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions (ISO 14660-1:1999)

DIN EN ISO 14660-2/A1:2010-08

Отменен

Geometrical Product Specifications (GPS) - Geometric features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature - German version EN ISO 14660-2:1999/prA1:2010 (ISO 14660-2:1999/PDAM 1:2010)

DIN ISO/TS 17450-1 Berichtigung 1:2009-08

Отменен

Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO/TS 17450-1:2005); German version CEN ISO/TS 17450-1:2007, Corrigendum to DIN ISO/TS 17450-1:2008-04; German version CEN ISO/TS 17450-1:2007/AC:2008

DIN ISO/TS 17450-2:2002-05

Отменен

Geometrical product specification (GSP) - General and concepts - Part 2: Basic tenets, specifications, operators and uncertainties (ISO/DTS 17450-2:2002)

DIN EN ISO 286-1:2019-02

Отменен

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013); German version EN ISO 286-1:2010 + AC:2013 — 49 стр.

DIN ISO 286-1:1990-11

Отменен

ISO system of limits and fits; bases of tolerances, deviations and fits; identical with ISO 286-1:1988 — 34 стр.

На этот документ ссылаются

DIN EN ISO 13706:2012-03

Действует

Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers (ISO 13706:2011); English version EN ISO 13706:2011, only on CD-ROM — 155 стр.

DIN EN ISO 1938-1:2016-03

Действует

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015); German version EN ISO 1938-1:2015 — 41 стр.

DIN EN ISO 1179-2:2014-03

Действует

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013); German version EN ISO 1179-2:2013 — 18 стр.

DIN EN ISO 17450-2:2013-04

Действует

Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012); German version EN ISO 17450-2:2012 — 26 стр.

DIN 68101:2012-02

Действует

Fundamental deviations and tolerance zones for wood working and wood processing — 14 стр.

DIN ISO 29262:2013-03

Действует

Production equipment for microsystems - Interface between end effector and handling system (ISO 29262:2011) — 24 стр.

DIN ISO 286-1:1990-11

Отменен

ISO system of limits and fits; bases of tolerances, deviations and fits; identical with ISO 286-1:1988 — 34 стр.

DIN 4000-175:2015-06

Действует

Tabular layouts of properties - Part 175: Cassettes, nests and cartridges for indexable inserts — 32 стр.

DIN 4000-142:2011-02

Действует

Tabular layout of properties - Part 142: Shaving cutters for external and internal toothing — 23 стр.

DIN 4000-89:2012-03

Действует

Tabular layouts of properties - Part 89: Adaptive items for tools and extenders — 71 стр.

DIN 4000-132:2011-09

Действует

Tabular layouts of properties - Part 132: Super abrasive products with bore — 39 стр.

DIN 4003-77:2013-02

Действует

Concept for the design of 3D models based on properties according to DIN 4000 - Part 77: Inserts, clamped, for grooving, parting and thread machining — 62 стр.

DIN 4000-137:2011-09

Действует

Tabular layouts of properties - Part 137: Tools with geometrically undefined cutting edges for machining of gears — 28 стр.

DIN 4000-135:2011-09

Действует

Tabular layouts of properties - Part 135: Tools for dressing and profile trueing of bonded grinding tools — 37 стр.

DIN 4000-130:2011-09

Действует

Tabular layout of properties - Part 130: Abrasive pencils and abrasive wheels with thread inserts — 20 стр.

DIN 4000-136:2011-09

Действует

Tabular layouts of properties - Part 136: Holder and chuck tools for rotating and stationary grinding and dressing tools — 26 стр.

DIN 4000-128:2011-09

Действует

Tabular layout of article characteristics - Part 128: Bonded abrasive products with bore or threaded insert — 33 стр.

DIN 4000-133:2011-09

Действует

Tabular layouts of properties - Part 133: Super abrasive products with shank — 24 стр.

DIN 4000-93:2013-08

Действует

Tabular layouts of properties - Part 93: Collets, clamping sleeves, ferrules, expanding sleeves and chuck heads — 26 стр.

DIN 4000-126:2012-09

Действует

Tabular layouts of properties - Part 126: Reamers with non-indexable cutting edges — 23 стр.

DIN 4000-144:2011-09

Действует

Tabular layouts of properties - Part 144: Master gears and truing gears for involute teeth — 19 стр.

DIN 4000-127:2011-04

Действует

Tabular layouts of properties - Part 127: Reamers for replaceable inserts — 23 стр.

DIN 4000-131:2011-09

Действует

Tabular layout of properties - Part 131: Abrasive products on base — 28 стр.

DIN 18710-3:2010-09

Действует

Engineering survey - Part 3: Setting out — 19 стр.

DIN 18710-1:2010-09

Действует

Engineering survey - Part 1: General requirements — 30 стр.

DIN 22261-3:2015-11

Действует

Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 3: Execution of steel structures — 52 стр.

DIN 25407-3:2012-11

Действует

Shielding walls against ionizing radiation - Part 3: Construction of lead hot cells — 14 стр.

DIN 25412-1:2015-02

Отменен

Laboratory equipment - Glove boxes - Part 1: Dimensions and requirements — 21 стр.

DIN 25412-1:2015-12

Действует

Laboratory equipment - Glove boxes - Part 1: Dimensions and requirements — 21 стр.

DIN 25420-1:2014-12

Действует

Construction of concrete hot cells - Part 1: Requirements for remotely operated cells — 14 стр.

DIN 4000-143:2011-02

Отменен

Tabular layouts of properties - Part 143: Pinion type cutters with bore or shank — 22 стр.

DIN EN ISO 4759-3:2016-12

Действует

Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016); German version EN ISO 4759-3:2016 — 20 стр.

DIN 4000-141:2011-02

Отменен

Tabular layouts of properties - Part 141: Hobs with bore or shank for cylindrical gears — 39 стр.

DIN 58744-1:2017-02

Действует

Production in optical engineering - Diamond core drills - Part 1: With fitting thread — 10 стр.

DIN 58744-3:2017-02

Действует

Production in optical engineering - Diamond core drills - Part 3: With external fitting thread — 10 стр.

DIN EN ISO 12209:2017-05

Действует

Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air (ISO 12209:2013 + Amd 1:2016, Corrected version 2017-03); German version EN ISO 12209:2013 + A1:2016 — 30 стр.

DIN EN ISO 12209:2013-12

Отменен

Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air (ISO 12209:2013); German version EN ISO 12209:2013 — 26 стр.

DIN 3973-1:2017-02

Действует

Tolerances of worm wheel hobs - Part 1: Fundamental principles — 24 стр.

DIN 28006-1:2017-05

Действует

Tolerances and limit deviations for agitator vessels - Part 1: Agitator vessels of metallic materials — 8 стр.

DIN 7190-2:2017-02

Действует

Interference fits - Part 2: Calculation and design rules for conical self-locking pressfits — 34 стр.

DIN EN ISO 148-1:2017-05

Действует

Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016); German version EN ISO 148-1:2016 — 40 стр.

DIN EN ISO 1938-2:2017-05

Действует

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017); German version EN ISO 1938-2:2017 — 20 стр.

DIN EN ISO 14405-1:2017-07

Действует

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016) — 68 стр.

DIN EN ISO 15848-1:2017-07

Действует

Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015 + Amd.1:2017); German version EN ISO 15848-1:2015 + A1:2017 — 59 стр.

DIN EN ISO 14405-1:2011-04

Отменен

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear Sizes (ISO 14405-1:2010); German version EN ISO 14405-1:2010 — 46 стр.

DIN 4000-81:2012-08

Отменен

Tabular layouts of properties - Part 81: Drills and countersinking tools with non-indexable cutting edges — 31 стр.

DIN 33822:2017-08

Действует

Gas pressure regulators and safety devices for gas installations for inlet pressure up to 5 bar — 61 стр.

DIN 7968:2017-01

Отменен

Hexagon fit bolts with hexagon nut for steel structures — 11 стр.

DIN 444:2017-04

Действует

Fasteners - Eye bolts — 11 стр.

DIN ISO 22917:2017-03

Отменен

Precision superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride (ISO 22917:2016); Text in German and English — 23 стр.

DIN ISO 22917:2017-11

Действует

Precision superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride (ISO 22917:2016) — 23 стр.

DIN 4000-86:2011-03

Отменен

Tabular layouts of properties - Part 86: Drills and counter sinking tools for indexable inserts — 26 стр.

DIN 4000-140:2011-02

Действует

Tabular layouts of properties - Part 140: Toothing system data of work pieces — 26 стр.

DIN 8140-3:2017-05

Действует

Wire thread inserts for ISO metric screw threads - Part 3: Gauges and gauge sizes — 12 стр.

DIN 7190-1:2017-02

Действует

Interference fits - Part 1: Calculation and design rules for cylindrical self-locking pressfits — 47 стр.

DIN 4000-90:2011-12

Отменен

Tabular layouts of properties - Part 90: Tool holders for indexable inserts — 30 стр.

DIN 7968:2017-08

Действует

Hexagon fit bolts with hexagon nut for steel structures — 11 стр.

DIN 16742:2013-10

Отменен

Plastics moulded parts - Tolerances and acceptance conditions; Text in German and English — 71 стр.

DIN EN ISO 14405-2:2012-03

Отменен

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011); German version EN ISO 14405-2:2011 — 28 стр.

DIN 4000-80:2011-08

Отменен

Tabular layouts of properties - Part 80: Screwing taps, cold forming taps and screwing dies — 19 стр.

DIN 4000-83:2011-05

Отменен

Tabular layouts of properties - Part 83: Milling cutter with arbor hole and non-indexable cutting edges — 25 стр.

DIN 4000-82:2011-08

Отменен

Tabular layouts of properties - Part 82: End mills with non-indexable cutting edges — 30 стр.

DIN 27200:2011-11

Отменен

State of railway vehicles - Terms and definitions for the reliable state of railway vehicles — 18 стр.

DIN 7164:2017-03

Действует

Geometrical product specifications (GPS) - Workshop plug gauges and spherical plug gauges for inside diameters with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 from 1 mm to 500 mm nominal size - Deviations and tolerances for gauges — 71 стр.

DIN 7163:2017-03

Действует

Geometrical product specifications (GPS) - Working gauges for external dimensions with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 and nominal dimensions of 1 mm to 500 mm and associated acceptance gauges - Gauge dimensions and tolerances — 52 стр.

DIN EN ISO 286-2:2010-11

Отменен

DIN EN ISO 286-1:2019-02

Отменен

DIN EN ISO 286-2:2019-02

Отменен

DIN EN ISO 286-1:2019-09

Действует

DIN EN ISO 286-2:2019-09

Действует

DIN 4000-87:2011-12

Отменен

Tabular layouts of properties - Part 87: End mills for indexable inserts — 26 стр.

DIN 4000-88:2011-12

Отменен

Tabular layouts of properties - Part 88: Milling cutter with arbor hole for indexable inserts — 23 стр.

DIN EN ISO 2692:2015-12

Отменен

Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014); German version EN ISO 2692:2014 — 60 стр.