Стандарт IEC 61249-2-7:2002 ed1.0

BS EN 60539-1:2008

Действует

Directly heated negative temperature coefficient thermistors. Generic specification — 50 стр.

BS EN 60384-1:2009

Действует

Fixed capacitors for use in electronic equipment. Generic specification — 84 стр.

DIN EN 60068-2-58:2005-03

Отменен

Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) (IEC 60068-2-58:2004); German version EN 60068-2-58:2004 + Corrigendum 2004 — 27 стр.

DIN EN 61189-5-2:2015-11

Действует

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods for materials and assemblies - Soldering flux for printed board assemblies (IEC 61189-5-2:2015); German version EN 61189-5-2:2015 — 44 стр.

DIN EN 61189-5-4:2015-11

Действует

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-4: General test methods for materials and assemblies - Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies (IEC 61189-5-4:2015); German version EN 61189-5-4:2015 — 25 стр.

DIN EN 61189-5-3:2015-11

Действует

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies (IEC 61189-5-3:2015); German version EN 61189-5-3:2015 — 45 стр.

DIN EN 62137-4:2015-07

Действует

Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices (IEC 62137-4:2014); German version EN 62137-4:2014 + AC:2015 — 44 стр.

DIN EN 62326-20:2016-12

Действует

Printed boards - Part 20: Printed circuit boards for high-brightness LEDs (IEC 62326-20:2016); German version EN 62326-20:2016 — 52 стр.

DIN EN 61189-5-1:2017-04

Действует

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General test methods for materials and assemblies - Guidance for printed board assemblies (IEC 61189-5-1:2016); German version EN 61189-5-1:2016 — 27 стр.

DIN EN 60539-1:2008-11

Отменен

Directly heated negative temperature coefficient thermistors - Part 1: Generic specification (IEC 60539-1:2008); German version EN 60539-1:2008 — 49 стр.

BS EN 50155:2017

Действует

Railway applications. Rolling stock. Electronic equipment — 108 стр.

BS EN 50155:2007

Заменен

Railway applications. Electronic equipment used on rolling stock — 46 стр.

BS EN 62137-4:2014

Действует

Electronics assembly technology. Endurance test methods for solder joint of area array type package surface mount devices — 48 стр.

BS EN 62137-3:2012

Действует

Electronics assembly technology. Selection guidance of environmental and endurance test methods for solder joints — 45 стр.

BS EN 62137-1-5:2009

Действует

Surface mounting technology. Environmental and endurance test methods for surface mount solder joints. Mechanical shear fatigue test — 28 стр.

BS EN 62137-1-4:2009

Действует

Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Cyclic bending test — 18 стр.

BS EN 62137-1-3:2009

Действует

Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Cyclic drop test — 26 стр.

BS EN 62137-1-2:2007

Действует

Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Shear strength test — 20 стр.

BS EN 62137-1-1:2007

Действует

Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Pull strength test — 18 стр.

BS EN 62326-4-1:1997

Действует

Printed boards. Rigid multilayer printed boards with interlayer connections. Sectional specification. Capability detail specification. Performance levels, A, B and C — 70 стр.

BS EN 62326-4:1997

Действует

Printed boards. Rigid multilayer printed boards with interlayer connections. Sectional specification — 42 стр.

BS EN 62326-20:2016

Действует

Printed boards. Printed circuit boards for high-brightness LEDs — 54 стр.

BS EN 61249-4-17:2009

Действует

Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly — 20 стр.

BS EN 61249-4-16:2009

Действует

Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly — 20 стр.

BS EN 61249-4-15:2009

Действует

Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly — 20 стр.

BS EN 61249-4-14:2009

Действует

Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly — 20 стр.

BS EN 61249-4-12:2005

Действует

Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad. Non-halogenated multifuctional epoxide woven E-glass prepeg of defined flammability — 16 стр.

BS EN 61249-4-11:2005

Действует

Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad. Non-halogenated epoxide woven E-glass prepeg of defined flammability — 16 стр.

BS EN 61249-4-1:2008

Действует

Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Epoxide woven E-glass prepreg of defined flammability — 16 стр.

BS EN 61189-5-4:2015

Действует

Test methods for electrical materials, printed boards and other interconnection structures and assemblies. General test methods for materials and assemblies. Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies — 26 стр.

BS EN 61189-5-3:2015

Действует

Test methods for electrical materials, printed boards and other interconnection structures and assemblies. General test methods for materials and assemblies. Soldering paste for printed board assemblies — 46 стр.

BS EN 61189-5-2:2015

Действует

Test methods for electrical materials, printed boards and other interconnection structures and assemblies. General test methods for materials and assemblies. Soldering flux for printed board assemblies — 46 стр.

BS EN 61189-5-1:2016

Действует

Test methods for electrical materials, printed boards and other interconnection structures and assemblies. General test methods for materials and assemblies. Guidance for printed board assemblies — 32 стр.

BS EN 60664-3:2017

Действует

Insulation coordination for equipment within low-voltage systems. Use of coating, potting or moulding for protection against pollution — 30 стр.

BS EN 61051-1:2008

Действует

Varistors for use in electronic equipment. Generic specification — 40 стр.

BS EN 60384-1:2016

Действует

Fixed capacitors for use in electronic equipment. Generic specification — 90 стр.

BS EN 60393-1:2009

Действует

Potentiometers for use in electronic equipment. Generic specification — 110 стр.

BS EN 60352-8:2011

Действует

Solderless connections. Compression mount connections. General requirements, test methods and practical guidance — 24 стр.

BS EN ISO 9455-17:2006

Действует

Soft soldering fluxes. Test methods. Surface insulation resistance comb test and electrochemical migration test of flux residues — 30 стр.

BS ISO 16525-9:2014

Действует

Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of high-speed signal-transmission characteristics — 54 стр.

BS ISO 16525-8:2014

Действует

Adhesives. Test methods for isotropic electrically conductive adhesives. Electrochemical-migration test methods — 18 стр.

BS ISO 16525-7:2014

Действует

Adhesives. Test methods for isotropic electrically conductive adhesives. Environmental test methods — 14 стр.

BS ISO 16525-2:2014

Действует

Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of electrical characteristics for use in electronic assemblies — 20 стр.

18/30355702 DC

Действует

BS EN 60115-1. Fixed resistors for use in electronic equipment. Part 1. Generic specification — 140 стр.

BS EN 62024-1:2008

Заменен

High frequency inductive components. Electrical characteristics and measuring methods. Nanohenry range chip inductor — 22 стр.

BS EN IEC 62024-1:2018

Действует

High frequency inductive components. Electrical characteristics and measuring methods. Nanohenry range chip inductor — 24 стр.

BS EN 60539-1:2016

Действует

Directly heated negative temperature coefficient thermistors. Generic specification — 62 стр.

DIN EN 60539-1:2017-01

Действует

Directly heated negative temperature coefficient thermistors - Part 1: Generic specification (IEC 60539-1:2016); German version EN 60539-1:2016 — 59 стр.

18/30380157 DC

Действует

BS IEC 61189-5-601. Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Part 5-601. General test methods for materials and assemblies. Reflow soldering ability test for solder joint, and reflow heat resistance test for printed boards — 34 стр.

BS EN 60127-3:2015

Действует

Miniature fuses. Sub-miniature fuse-links — 30 стр.

BS EN 60127-2:2014

Действует

Miniature fuses. Cartridge fuse-links — 46 стр.

PD IEC/PAS 60127-8:2014

Действует

Miniature fuses. Fuse resistors with particular overcurrent protection — 28 стр.

BS EN IEC 60127-8:2018

Действует

Miniature fuses. Fuse resistors with particular overcurrent protection — 30 стр.

BS EN 60738-1:2006+A1:2009

Действует

Thermistors. Directly heated positive temperature coefficient. Generic specification — 60 стр.

BS EN 60127-4:2005+A2:2013

Действует

Miniature fuses. Universal modular fuse-links (UMF). Through-hole and surface mount types — 36 стр.

BS EN 62326-1:2002

Действует

Printed boards. Generic specification — 56 стр.

BS EN 60127-7:2013

Заменен

Miniature fuses. Miniature fuse-links for special applications — 26 стр.

BS EN 61189-5:2006

Действует

Test methods for electrical materials, interconnection structures and assemblies. Test methods for printed board assemblies — 66 стр.

BS EN 60127-7:2016

Действует

Miniature fuses. Miniature fuse-links for special applications — 34 стр.

BS EN 60068-2-21:2006

Действует

Environmental testing. Tests. Test U: Robustness of terminations and integral mounting devices — 32 стр.

BS EN 60115-1:2011+A11:2015

Действует

Fixed resistors for use in electronic equipment. Generic specification — 84 стр.

DIN EN 61051-1:2009-04

Отменен

Varistors for use in electronic equipment - Part 1: Generic specification (IEC 61051-1:2007); German version EN 61051-1:2008 — 38 стр.

DIN EN 62024-1:2008-10

Отменен

High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor (IEC 62024-1:2008); German version EN 62024-1:2008 — 21 стр.

DIN EN IEC 62024-1:2019-02

Действует

High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor (IEC 62024-1:2017); German version EN IEC 62024-1:2018 — 22 стр.

ÖVE/ÖNORM EN 60664-3:2010-11

Заменен

Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution (IEC 60664-3:2003 + A1:2010) (english version)

ÖVE/ÖNORM EN 60127-7:2014-03

Заменен

Miniature fuses - Part 7: Miniature fuse-links for special applications (IEC 60127-7:2013) (english version)

ÖVE/ÖNORM EN 60598-1:2009-11

Заменен

Luminaires - Part 1: General requirements and tests (IEC 60598-1:2008, modified) (english version)

ÖVE/ÖNORM EN 61051-1:2009-05

Заменен

Varistors for use in electronic equipment - Part 1: Generic specification (IEC 61051-1:2007) (english version)

ÖVE/ÖNORM EN 60393-1:2010-03

Действует

Potentiometers for use in electronic equipment - Part 1: Generic specification (IEC 60393-1:2008) (english version)

ÖVE/ÖNORM EN 62137-4:2015-09

Действует

Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices (IEC 62137-4:2014) (english version)

ÖVE/ÖNORM EN 60738-1:2010-07

Действует

Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification (IEC 60738-1:2006 + A1:2009) (english version)

ÖVE/ÖNORM EN 60127-4:2014-02

Действует

Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types (IEC 60127-4:2005 + A1:2008 + A2:2012) (english version)

ÖVE/ÖNORM EN 60352-8:2012-02

Действует

Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance (IEC 60352-8:2011) (english version)

ÖVE/ÖNORM EN 62137-1-5:2010-02

Действует

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-5: Mechanical shear fatigue test (IEC 62137-1-5:2009) (english version)

ÖVE/ÖNORM EN 62137-3:2012-10

Действует

Electronics assembly technology - Part 3: Selection guidance of environmental and endurance test methods for solder joints (IEC 62137-3:2011) (english version)

ÖVE/ÖNORM EN 62137-1-4:2009-10

Действует

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test (IEC 62137-1-4:2009) (english version)

ÖVE/ÖNORM EN 62137-1-3:2009-08

Действует

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test (IEC 62137-1-3:2008) (english version)

ÖVE/ÖNORM EN 60127-3:2015-12

Заменен

Miniature fuses -- Part 3: Sub-miniature fuse-links (IEC 60127-3:2015) (english version)

ÖNORM EN ISO 9455-17:2006-09

Действует

Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues (ISO 9455-17:2002)

OVE EN IEC 62024-1:2019-03

Действует

High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor (IEC 62024-1:2017) (english version)

OVE EN IEC 60127-8:2019-06

Действует

Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection (IEC 60127-8:2018) (english version)

OVE EN IEC 61051-1:2019-09

Действует

Varistors for use in electronic equipment -- Part 1: Generic specification (IEC 61051-1:2018) (english version)

OVE EN 62326-20:2017-01

Действует

Printed boards -- Part 20: Printed circuit boards for high-brightness LEDs (IEC 62326-20:2016) (english version)

OVE EN 60127-7:2016-10

Действует

Miniature fuses -- Part 7: Miniature fuse-links for special applications (IEC 60127-7:2015) (english version)

OVE EN 60384-1:2017-05

Действует

Fixed capacitors for use in electronic equipment -- Part 1: Generic specification ( IEC 60384-1:2016) (english version)

OVE EN 60539-1:2017-03

Действует

Directly heated negative temperature coefficient thermistors -- Part 1: Generic specification (IEC 60539-1:2016) (english version)

IEC 60249-2-5:1987/AMD2:1992 ed2.0

Заменен

Amendment 2 - Base materials for printed circuits. Part 2: Specifications. Specification No. 5: Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) — 5 стр.

IEC 60249-2-5:1987/AMD4:1994 ed2.0

Заменен

Amendment 4 - Base materials for printed circuits. Part 2: Specifications. Specification No. 5: Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) — 5 стр.

IEC 60249-2-5:1987/AMD5:2000 ed2.0

Заменен

Amendment 5 - Base materials for printed circuits. Part 2: Specifications. Specification No. 5: Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) — 13 стр.

IEC 60249-2-5:1987/AMD3:1993 ed2.0

Заменен

Amendment 3 - Base materials for printed circuits. Part 2: Specifications. Specification No. 5: Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) — 11 стр.

IEC 60249-2-12:1987/AMD2:1993 ed2.0

Заменен

Amendment 2 - Base materials for printed circuits - Part 2: Specifications - Specification No 12: Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards — 11 стр.

IEC 60249-2-5:1987 ed2.0

Заменен

Base materials for printed circuits. Part 2: Specifications. Specification No. 5: Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) — 25 стр.

IEC 60249-2-12:1987 ed2.0

Заменен

Base materials for printed circuits - Part 2: Specifications - Specification No 12: Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards — 17 стр.

Каталог стандартов

IEC 61249-2-7:2002 ed1.0

Ссылочные документы

На этот документ ссылаются