This standard applies to welding processes where the skill of the diver-welder has a significant influence on weld
quality.
This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and
certification for the approval testing of diver-welder performance for the welding of steels underwater in hyperbaric
wet environment. The recommended format for the certificate of approval testing is given in Annex A.
During the approval test the diver-welder should be required to show adequate practical experience and job
knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be
approved, information on these aspects is given in Annex B.
This standard is applicable when the diver-welder s testing is required by the purchaser, by inspection authorities or
by other organisations.
The welding processes referred to in this standard include those fusion welding processes which are designated as
manual or partly mechanised welding. It does not cover fully mechanised and fully automatic processes (see 5.2).
All new approvals should be in accordance with this standard from the date of this issue.
However, this standard does not invalidate previous diver-welder approvals made to former national standards or
specifications, providing the intent of the technical requirements is satisfied and the previous approvals are relevant
to the application and production work on which they are employed.
Also, where additional tests should be carried out to make the approval technically equivalent it is only necessary
to do the additional tests on a test piece which should be made in accordance with this standard. Consideration of
previous approvals to national standards or specifications should be at the time of the enquiry/contract stage and
agreed between the contracting parties.
The certificate of approval testing is issued und (...abbreviated)
Festgelegt werden für Unterwasserschweißer zur Ausführung von Verbindungsschweißungen an Stählen in einer nassen Umgebung die wesentlichen Anforderungen, Geltungsbereiche, Prüfbedingungen, Bewertungsanforderungen und die Bescheinigung über eine abgelegte Prüfung. Im Anhang B ist der empfohlene Vordruck für die Prüfungsbescheinigung wiedergegeben. Bei der Prüfung sollten vom Unterwasserschweißer angemessene praktische Erfahrung und Fachkenntnisse (Prüfung nicht obligatorisch) hinsichtlich der Schweißprozesse, Werkstoffe und Sicherheitsanforderungen, für die er zugelassen werden soll, verlangt werden. Eine Prüfung sollte abgelegt werden, wenn dies vom Kunden, durch Abnahmeorganisationen oder von sonstigen Stellen verlangt wird. Die angeführten Schmelzschweißprozesse sind vom Unterwasserschweißer von Hand oder teilmechanisch auszuführen. Vollmechanisierte und vollautomatische Prozesse werden in dieser Norm nicht berücksichtigt.