Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods (IEC 62631-2-1:2018); German version EN IEC 62631-2-1:2018— 25 стр.
Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)— 21 стр.
Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20558-2:2018); German version EN ISO 20558-2:2019— 14 стр.
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017); German version EN ISO 20028-2:2017— 15 стр.
Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21309-2:2019); German version EN ISO 21309-2:2019— 25 стр.
Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21970-2:2018); German version EN ISO 21970-2:2018— 17 стр.
Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21970-2:2019); German version EN ISO 21970-2:2019— 17 стр.
Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/FDIS 21970-2:2019); German and English version prEN ISO 21970-2:2019— 17 стр.
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017); German version EN ISO 22007-4:2017— 23 стр.
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014); German version EN ISO 22007-6:2015— 20 стр.
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2008); German version EN ISO 22007-4:2012— 18 стр.
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017); German version EN ISO 20568-2:2017— 29 стр.
Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009); German version EN ISO 25137-2:2017— 13 стр.
Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 7: Storage of radioactive sources - Requirements on protection against radiation, fire and theft to be met by storage facilities— 23 стр.
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2012 + AMD 1:2014)— 25 стр.
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes (ISO 16486-2:2012 + AMD 1:2014)— 17 стр.
Plastics - Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources (ISO 4582:2017)— 25 стр.
Textile machinery and accessories - Machine parts in contact with textile processing oils - Part 2: Determination of the impact on polymeric materials (ISO 11659-2:2004)— 16 стр.
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 4: Valves (ISO 16486-4:2016)— 22 стр.
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 5: Fitness for purpose of the system (ISO 16486-5:2012)— 28 стр.
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings (ISO 16486-3:2012 + AMD 1:2014)— 24 стр.
Carbon-fibre-reinforced plastics - Determination of compression-after-impact properties at a specified impact-energy level (ISO 18352:2009); Text in German and English— 28 стр.
Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999); German version EN ISO 13468-2:2006— 11 стр.
Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015); German version EN ISO 13927:2015— 31 стр.
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:2006); German version EN ISO 12086-2:2006— 56 стр.
Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2012)— 18 стр.
Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2001); German version EN ISO 13927:2003— 26 стр.
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012); German version EN ISO 11403-2:2012— 16 стр.
Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011); German version EN ISO 11357-3:2013— 11 стр.
Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019); German version EN ISO 11833-1:2019— 26 стр.
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007); German version EN ISO 11542-2:1998 + AC:2008— 21 стр.
Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 5: Installation; German version FprEN ISO 11855-5:2015— 18 стр.
Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996); German version EN ISO 13468-1:1996— 7 стр.
Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012); German version EN ISO 11833-1:2012— 22 стр.
Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)— 12 стр.
Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013), German version EN ISO 11357-2:2014— 11 стр.
Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003); German version EN ISO 11343:2005— 13 стр.
Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999); German version EN ISO 14663-2:2006— 22 стр.
Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2018); German version EN ISO 15527:2018— 21 стр.
Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2010); German version EN ISO 15527:2013— 15 стр.
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017); German version EN ISO 16396-2:2017— 21 стр.
Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010); German version EN ISO 10352:2010— 12 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007 + Amd 1:2014); German version EN ISO 10350-1:2008 + A1:2014— 16 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011); German version EN ISO 10350-2:2011— 19 стр.
Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009); German version EN ISO 8986-2:2009— 14 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007); German version EN ISO 10350-1:2008— 16 стр.
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006); German version EN ISO 9988-2:2015— 12 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017); German version EN ISO 10350-1:2017— 22 стр.
Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2010 + Amd 1:2013); German version EN ISO 8536-4:2013 + A1:2013— 26 стр.
Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification; German version EN 1794-3:2016— 16 стр.
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German version EN 438-2:2016— 110 стр.
Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity; German version EN 1389:2003— 10 стр.
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German version EN 438-2:2005— 76 стр.
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German version EN 438-2:2016+A1:2018— 109 стр.
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008); German version EN ISO 2898-2:2008— 11 стр.
Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993); German version EN ISO 3219:1994— 8 стр.
Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000)— 7 стр.
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method (ISO/FDIS 4577:2019); German and English version prEN ISO 4577:2019— 13 стр.
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995); German version EN ISO 2507-1:2017— 12 стр.
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method (ISO 4577:2019); German version EN ISO 4577:2019— 13 стр.
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air, oven method (ISO 4577:1983); German version EN ISO 4577:1999— 8 стр.
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017); German version EN ISO 4589-2:2017— 41 стр.
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995); German version EN ISO 4894-2:1999— 10 стр.
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017); German version EN ISO 4589-2:2017— 39 стр.
Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction; German version EN 17129:2018— 26 стр.
Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique; German version EN 17098-2:2018— 14 стр.
Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films; German version EN 17098-1:2018— 32 стр.
