Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1852-2:2009— 19 стр.
Communication networks and systems for power utility automation - Part 4: System and project management (IEC 61850-4:2011); German version EN 61850-4:2011— 38 стр.
Optical amplifiers - Part 5-2: Qualification specifications; Reliability qualification for optical fibre amplifiers (IEC 61291-5-2:2002); German version EN 61291-5-2:2002— 25 стр.
Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results (IEC 61174:2015); English version EN 61174:2015— 241 стр.
Radio frequency and coaxial cable assemblies - Part 1: Generic specification; general requirements and test methods (IEC 60966-1:1999); German version EN 60966-1:1999— 32 стр.
Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015); German version EN ISO 17989-1:2015— 24 стр.
Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2005); German version EN ISO 17662:2005— 38 стр.
Petroleum, petrochemical and natural gas industries - Scheme for conformity assessment of manufacturers of special materials (ISO 17782:2018); English version EN ISO 17782:2018— 67 стр.
Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling (ISO 22442-2:2007); German version EN ISO 22442-2:2007— 23 стр.
Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2008); German version EN ISO 28765:2011— 35 стр.
Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016); German version EN ISO 28765:2016— 39 стр.
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifier(s) (PP-MD) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 14758-2:2007— 18 стр.
Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Certification/Registrations Programs; German and English version EN 9104-002:2008— 98 стр.
Aerospace - Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa - Procurement specification (ISO 9154:2016); Text in German and English— 62 стр.
Aerospace series - Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1550 MPa - Procurement specification (ISO 9154:2016); Text in German and English— 62 стр.
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015); German version EN ISO 13849-1:2015— 113 стр.
Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2003 + Cor. 1:2009); German version EN ISO 13485:2012 + AC:2012— 86 стр.
Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006 + Amd 1:2014); German version EN ISO 11607-1:2009 + A1:2014— 45 стр.
Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2018); German version EN ISO 11737-1:2018— 76 стр.
Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006 + Amd 1:2014); German version EN ISO 11607-2:2006 + A1:2014— 21 стр.
Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects (ISO 11137-3:2006); German version EN ISO 11137-3:2006— 25 стр.
Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use (ISO 14922-1:1999); German version EN ISO 14922-1:1999— 8 стр.
Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999); German version EN ISO 14922-2:1999— 13 стр.
Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999); German version EN ISO 14922-4:1999— 9 стр.
Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2011); German version EN ISO 15378:2011— 80 стр.
Environmental management systems - General guidelines on principles, systems and support techniques (ISO 14004:2004); German and English version EN ISO 14004:2010— 91 стр.
Plastics piping systems for industrial applications - Polybutylene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system; Metric series (ISO 15494:2003); German version EN ISO 15494:2003— 89 стр.
Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016); German version EN ISO 16904:2016— 84 стр.
Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999); German version EN ISO 14922-3:1999— 12 стр.
Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999); German version EN ISO 15541:2001— 11 стр.
Microbiology of food and animal feeding stuffs - Protocol for the validation of alternative methods (ISO 16140:2003 + Amd.1:2011); German version EN ISO 16140:2003 + A1:2011— 93 стр.
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity; German version EN 1504-8:2004— 12 стр.
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2011+A1:2014— 31 стр.
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 448:2009— 38 стр.
Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel; German version EN 508-1:2014— 50 стр.
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel; German version EN 508-3:2008— 39 стр.
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP); German version EN 1504-8:2016— 19 стр.
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version prEN 488:2014— 31 стр.
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes; German version EN 1254-1:1998— 23 стр.
Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes; German version EN 1254-8:2012— 26 стр.
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes; German version EN 1254-2:1998— 22 стр.
Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms; German version EN 1474-1:2008— 77 стр.
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system— 46 стр.
Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products; German version EN 862:2005— 19 стр.
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance; German version EN 877:1999 + A1:2006 + A1:2006/AC:2008— 59 стр.
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes; German version EN 1254-5:1998— 21 стр.
Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products; German version EN 862:2016— 19 стр.
Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005); German version EN ISO 3834-1:2005— 12 стр.
Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013); German version EN ISO 3691-6:2015 + AC:2016— 38 стр.
Information technology - Process assessment - Part 4: Guidance on use for process improvement and process capability determination (ISO/IEC 15504-4:2004)— 43 стр.
Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance; German version EN 15313:2016— 124 стр.
Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail; German version EN 14508:2016— 19 стр.
Fireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based or gelatinous fuel - Use in private households; German version EN 16647:2015— 38 стр.
Railway applications - Track - Flash butt welding of rails - Part 1: New R220, R260, R260Mn and R350HTgrade rails in a fixed plant; German version EN 14587-1:2007— 42 стр.
Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance; German version EN 15313:2010— 68 стр.
