Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007); German version EN ISO 8501-1:2007— 102 стр.
Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017); German version EN ISO 1101:2017
Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
Paints and varnishes - Determination of percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes principle (ISO 3233-1:2019); German version EN ISO 3233-1:2019— 22 стр.
Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010); German version EN ISO 3611:2010— 30 стр.
Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method) (ISO/DIS 8130-2:2020); German and English version prEN ISO 8130-2:2020
Coating powders - Part 3: Determination of density by liquid displacement pyknometer (ISO/DIS 8130-3:2020); German and English version prEN ISO 8130-3:2020
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012)
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); German version EN ISO 463:2006— 20 стр.
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces— 24 стр.
Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004); German version EN ISO 1101:2005— 68 стр.
Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:1982); German version EN ISO 2178:1995— 6 стр.
Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO 2360:2003); German version EN ISO 2360:2003— 17 стр.
Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014); German version EN ISO 17463:2014— 22 стр.
Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003); German version EN ISO 17652-3:2003— 10 стр.
Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016); German version EN ISO 19399:2017— 30 стр.
Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003); German version EN ISO 17652-4:2003— 7 стр.
Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003); German version EN ISO 17652-2:2003— 15 стр.
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2005); German version EN ISO 20567-1:2006— 19 стр.
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2005); German version EN ISO 20567-1:2006— 19 стр.
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012); German version EN ISO 20567-3:2012— 16 стр.
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2005); German version EN ISO 20567-2:2006— 16 стр.
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2017); German version EN ISO 20567-2:2017— 18 стр.
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2017); German version EN ISO 20567-1:2017— 21 стр.
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories (ISO 28721-1:2008)— 26 стр.
Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power (ISO 28199-3:2009); German version EN ISO 28199-3:2009— 15 стр.
Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009); German version EN ISO 28199-1:2009— 26 стр.
Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2009); German version EN ISO 28199-2:2009— 17 стр.
Paints and varnishes - Electro-deposition paints - Part 4: Compatibility of electro-deposition paints with liquid, pasteous and solid foreign materials— 13 стр.
Paints and varnishes - Corrosion protection of steel structures by powder coating systems - Assessment of powder coating systems and execution of coating— 16 стр.
Paints, varnishes and coatings - Corrosion protection of supporting thin-walled building components made of steel - Part 1: Requirements and test methods— 42 стр.
Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension— 12 стр.
Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods); German version EN 10169-1:1996— 14 стр.
Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection; German version EN 10339:2007— 17 стр.
Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications; German version EN 10169-2:2006— 24 стр.
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings; German version EN 10310:2003— 36 стр.
Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas; German version EN 10301:2003— 31 стр.
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings; German version EN 10289:2002— 45 стр.
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings; German version EN 10290:2002— 47 стр.
German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Corrosion protection of steel structures— 14 стр.
German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Corrosion protection of steel structures— 10 стр.
German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Corrosion protection of steel structures— 14 стр.
Waterproofing for indoor applications - Part 3: Waterproofing with liquid-applied waterproofing materials in conjunction with tiles and paving— 16 стр.
German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Corrosion protection of steel structures— 11 стр.
Waterproofing of buildings - Supplement 2: Information on methods for the determination of thickness of liquid-applied waterproofing materials and evaluation of the results— 11 стр.
Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry (ISO 13807:1999); Technical Corrigendum 1:2000— 6 стр.
Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry (ISO 13807:1999, including Cor 1:2000); German version EN ISO 13807:2009— 10 стр.
Paints and varnishes - Determination of mar resistance - Part 2: Method using a pointed stylus (ISO 12137-2:1997); German version EN ISO 12137-2:2006— 12 стр.
Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV and water (ISO 11507:1997); German version EN ISO 11507:2001— 16 стр.
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2018); German version EN ISO 12944-5:2018— 39 стр.
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humidity (ISO 11997-1:2005); German version EN ISO 11997-1:2006— 24 стр.
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017); German version EN ISO 11997-1:2017— 26 стр.
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2007); German version EN ISO 12944-5:2007— 36 стр.
Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (ISO 11341:1994); German version EN ISO 11341:1997— 16 стр.
Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014); English version EN ISO 12736:2014— 90 стр.
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:1998); German version EN ISO 12944-5:1998— 24 стр.
Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltametry (RV) technique and DC transient (DCT) measurements (ISO 13129:2012)— 23 стр.
Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007); German version EN ISO 11507:2007— 18 стр.
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013); German version EN ISO 11997-2:2013— 18 стр.
Paints and varnishes - Determination of mar resistance - Part 1: Method using a curved stylus (ISO 12137-1:1997, including Technical Corrigendum 1:1998); German version EN ISO 12137-1:2006— 12 стр.
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2000); German version EN ISO 11997-2:2006— 12 стр.
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test (ISO 12944-6:1998); German version EN ISO 12944-6:1998— 19 стр.
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:1998); German version EN ISO 12944-8:1998— 40 стр.
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013); German version EN ISO 11439:2013— 85 стр.
Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-1:2013); German version EN ISO 16474-1:2013— 33 стр.
Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 2: Collection of data (ISO 16773-2:2007); German version EN ISO 16773-2:2007— 23 стр.
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2000); German version EN ISO 15181-1:2004— 12 стр.
Petroleum, petrochemicals and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015); English version EN ISO 16961:2015— 52 стр.
Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003); German version EN ISO 15711:2004— 22 стр.
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016)— 29 стр.
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data (ISO 16773-2:2016); German version EN ISO 16773-2:2016— 36 стр.
