DIN EN 14364:2009-02

Отменен

Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints; German version EN 14364:2006+A1:2008 — 72 стр.

Описание Изменения Ссылки Версии

Ссылочные документы

DIN EN 476:2011-04

Действует

General requirements for components used in drains and sewers; German version EN 476:2011 — 29 стр.

DIN EN 13946:2012-02

Отменен

Water quality - Guidance for the routine sampling and pre-treatment of benthic diatoms from rivers and lakes; German version prEN 13946:2012

ÖNORM EN 14474:2012-09

Действует

Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods

DIN EN 1452-3:1999-09

Отменен

Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings; German version EN 1452-3:1999 — 28 стр.

ÖNORM CEN/TS 14578:2004-02

Заменен

Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) - Recommended practice for installation

ONR CEN/TS 14632:2012-08

Действует

Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (CEN/TS 14632:2012)

DIN EN ISO 75-2:2012-01

Отменен

Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO/DIS 75-2:2011); German version prEN ISO 75-2:2011

ÖNORM EN ISO 527-4:1997-09

Действует

Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997)

DIN EN ISO 527-5:2010-01

Отменен

Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009) — 19 стр.

ÖNORM EN ISO 3126:2005-06

Действует

Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)

ÖNORM EN ISO 20783-1:2011-05

Действует

Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2011)

ÖNORM EN 681-1:2007-07

Действует

Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber

BS ISO 2531:2009

Действует

Ductile iron pipes, fittings, accessories and their joints for water applications — 82 стр.

DIN ISO 4200:1981-02

Отменен

Plain end steel tubes, welded and seamless; general table of dimensions and conventional masses per unit length — 8 стр.

PD ISO/TR 10465-3:2007

Действует

Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP). Installation parameters and application limits — 72 стр.

DIN EN ISO 10468:1999-12

Отменен

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term, specific ring creep stiffness under wet conditions and calculation of the wet creep factor (ISO/DIS 10468:1999); German version prEN ISO 10468:1999

BS ISO 10928:2009

Действует

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use — 62 стр.

BS ISO 11922-1:1997

Заменен

Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Metric series — 20 стр.

DIN EN ISO 14828:1999-12

Отменен

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term, specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor (ISO/DIS 14828:1999); German version prEN ISO 14828:1999

DIN EN 705 Berichtigung 1:1995-12

Действует

Corrigenda to DIN EN 705:1994-08 — 1 стр.

ÖNORM ENV 1046:2002-02

Заменен

Plastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for installation above and below ground

DIN EN 1119:2009-07

Действует

Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements; German version EN 1119:2009 — 12 стр.

ÖNORM EN 1120:1997-07

Действует

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of ....(abbreviated)

DIN EN 12266-1:2012-06

Действует

Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version EN 12266-1:2012 — 19 стр.

DIN EN 12288:2010-10

Действует

Industrial valves - Copper alloy gate valves; German version EN 12288:2010 — 27 стр.

DIN EN 13936:2012-08

Отменен

Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods; German version prEN 13936:2012

DIN EN 14364:2013-05

Действует

DIN EN 14364:2006-07

Отменен

На этот документ ссылаются

DIN EN 14364:2013-05

Действует

DIN EN 14364:2006-07

Отменен

DIN EN 1436:1997-10

Отменен

Road marking materials - Road marking performances for road users; German version EN 1436:1997 — 11 стр.

DIN 18326:2012-09

Отменен

German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Renovation works on drainage channels — 18 стр.

DIN 18363:2006-10

Отменен

German construction contract procedures - Part C: General technical specifications for building works - Painting - coatings works — 21 стр.

DIN 1986-4:2011-12

Отменен

Drainage systems on private ground - Part 4: Fields of application of sewage pipes and fittings of different materials — 12 стр.