Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003— 20 стр.
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013); German version EN ISO 1179-1:2013— 13 стр.
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003— 11 стр.
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013); German version EN ISO 1179-2:2013— 18 стр.
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007); German version EN ISO 1179-4:2008— 14 стр.
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006); German version EN ISO 6149-2:2007— 16 стр.
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006); German version EN ISO 6149-3:2007— 18 стр.
Steel and cast iron - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 1: Silicon contents between 0,05 % and 1,0 % (ISO 4829-1:2018); German version EN ISO 4829-1:2018
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007); German version EN ISO 1179-3:2008— 19 стр.
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000— 65 стр.
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2006); German version EN ISO 6149-1:2007— 14 стр.
Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996); German version EN ISO 9974-1:2000— 8 стр.
Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996); German version EN ISO 9974-2:2000— 14 стр.
Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996); German version EN ISO 9974-3:2000— 12 стр.
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010); German version EN ISO 19879:2010— 28 стр.
Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003)— 18 стр.
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013)
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010 + Cor 1:2013)
Ergonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature) index (ISO 7243:2017); German version EN ISO 7243:2017— 28 стр.
Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO/DIS 11274:2018); German and English version prEN ISO 11274:2018
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO/DIS 6149-1:2018); German and English version prEN ISO 6149-1:2018
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)
Compression couplings - Part 2: Assembly instruction for non-soldering compression couplings with cutting rings according DIN 2353 and DIN EN ISO 8434-1— 6 стр.
Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007); German version EN ISO 8434-1:2007— 54 стр.
Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO/DIS 8434-1:2016); German and English version prEN ISO 8434-1:2016
Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007); German version EN ISO 8434-1:2007, Corrigendum to DIN EN ISO 8434-1:2008-02; German version EN ISO 8434-1:2007/AC:2009— 2 стр.
Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007); German version EN ISO 8434-1:2007— 54 стр.
Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007); German version EN ISO 8434-1:2007, Corrigendum to DIN EN ISO 8434-1:2008-02; German version EN ISO 8434-1:2007/AC:2009— 2 стр.
Compression couplings - Part 2: Assembly instruction for non-soldering compression couplings with cutting rings according DIN 2353 and DIN EN ISO 8434-1— 6 стр.
