Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыON

ÖVE/ÖNORM EN 62790:2016-03

Заменен
Junction boxes for photovoltaic modules - Safety requirements and tests (IEC 62790:2014) (english version)
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

IEC 60060-1:1989 ed2.0
Заменен
High-voltage test techniques. Part 1: General definitions and test requirements — 78 стр.
IEC 60068-1:1960/AMD2:1964 ed2.0
Заменен
Amendment 2 - Recommended basic climatic and mechanical robustness testing procedure for components for electronic equipment - Part 1: General — 10 стр.
IEC 60068-2-14:2009 ed6.0
Заменен
Environmental testing - Part 2-14: Tests - Test N: Change of temperature — 37 стр.
IEC 60068-2-70:1995 ed1.0
Действует
Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands — 10 стр.
IEC 60068-2-75:1997 ed1.0
Заменен
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests — 34 стр.
IEC 60068-2-78:2012 RLV ed2.0
Заменен
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state — 29 стр.
IEC 60228:1978 ed2.0
Заменен
Conductors of insulated cables — 13 стр.
IEC 60352-2:1990 ed1.0
Заменен
Solderless connections - Part 2: Solderless crimped connections - General requirements, test methods and practical guidance — 42 стр.
IEC 60512-12-1:2006 ed1.0
Действует
Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method — 11 стр.
IEC 60512-12-2:2006 ed1.0
Действует
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method — 9 стр.
IEC 60529:1976/AMD1:1978 ed1.0
Заменен
Amendment 1 - Classification of degrees of protection provided by enclosures — 5 стр.
IEC 60664-1:2007 ed2.0
Заменен
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests — 148 стр.
IEC 60664-3:2003/AMD1:2010/COR1:2010 ed2.0
Заменен
Corrigendum 1 to amendment 1 - Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution — 0 стр.
IEC 60695-2-11:2000/COR1:2001 ed1.0
Заменен
Corrigendum 1 - Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products — 0 стр.
IEC 60695-11-10:1999+AMD1:2003 CSV ed1.1
Заменен
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods — 51 стр.
IEC 60695-11-20:1999 ed1.0
Заменен
Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods — 37 стр.
IEC 60998-2-1:2002 ed2.0
Действует
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units — 57 стр.
IEC 60998-2-2:2002 ed2.0
Действует
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units — 45 стр.
IEC 60999-1:1999 ed2.0
Действует
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) — 55 стр.
IEC 60999-2:2003 ed2.0
Действует
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) — 35 стр.
IEC 61032:1997/COR1:2003 ed2.0
Действует
Corrigendum 1 - Protection of persons and equipment by enclosures - Probes for verification — 0 стр.
IEC 61140:2001 ed3.0
Заменен
Protection against electric shock - Common aspects for installation and equipment — 42 стр.
IEC 61730-1:2004+AMD1:2011+AMD2:2013 CSV ed1.2
Заменен
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction — 39 стр.
IEC 62852:2014 ed1.0
Действует
Connectors for DC-application in photovoltaic systems - Safety requirements and tests — 81 стр.
ISO 868:2003
Действует
Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness) — 10 стр.
ISO 4892-2:2013
Действует
Plastics -- Methods of exposure to laboratory light sources -- Part 2: Xenon-arc lamps — 18 стр.
BS EN 50618:2014
Действует
Electric cables for photovoltaic systems (BT(DE/NOT)258) — 34 стр.
BS EN 60060-1:2010
Действует
High-voltage test techniques. General definitions and test requirements — 76 стр.
BS EN 60068-2-14:2009
Действует
Environmental testing. Tests. Test N. Change of temperature — 20 стр.
BS EN 60068-1:2014
Действует
Environmental testing. General and guidance — 36 стр.
BS EN 60068-2-70:1996
Действует
Environmental testing. Test methods, Test Xb. Abrasion of markings and letterings caused by rubbing of fingers and hands — 14 стр.
BS EN 60068-2-75:2014
Действует
Environmental testing. Tests. Test Eh: Hammer tests — 36 стр.
BS EN 60068-2-78:2013
Действует
Environmental testing. Tests. Test Cab: Damp heat, steady state — 12 стр.
BS EN 60228:2005
Действует
Conductors of insulated cables — 22 стр.
BS EN 60352-2:2006
Действует
Solderless connections. Crimped connections. General requirements, test methods and practical guidance — 60 стр.
BS EN 60512-12-1:2006
Действует
Connectors for electronic equipment. Tests and measurements. Soldering tests — 10 стр.
BS EN 60512-12-2:2006
Действует
Connectors for electronic equipment. Tests and measurements. Soldering tests. Test 12b. Solderability, wetting, soldering iron method — 8 стр.
BS EN 60529:1992
Действует
Specification for degrees of protection provided by enclosures (IP code) — 42 стр.
BS EN 60664-1:2007
Действует
Insulation coordination for equipment within low-voltage systems. Principles, requirements and tests — 78 стр.
BS EN 60664-3:2017
Действует
Insulation coordination for equipment within low-voltage systems. Use of coating, potting or moulding for protection against pollution — 30 стр.
BS EN 60695-2-11:2014
Действует
Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT) — 20 стр.
BS EN 60695-11-20:1999
Заменен
Fire hazard testing. Test flames. 500 W flame test methods — 24 стр.
BS EN 60947-7-1:2009
Действует
Low-voltage switchgear and controlgear, Ancillary equipment. Terminal blocks for copper conductors — 40 стр.
BS EN 60998-2-1:2004
Действует
Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for connecting devices as separate entities with screw-type clamping units — 28 стр.
BS EN 60998-2-2:2004
Действует
Connecting devices for low voltage circuits for household and similar purposes. Particular requirements for connecting devices as separate entities with screwless-type clamping units — 24 стр.
BS EN 60999-1:2000
Действует
Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units, General requirements and particular requirements for clamping units for conductors from 0,2 mm$u2 up to 35 mm$u2 (included) — 32 стр.
BS EN 60999-2:2003
Действует
Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units. Particular requirements for clamping units for conductors above 35 mm$u2 up to 300 mm$u2 (included) — 22 стр.
BS EN 61032:1998
Действует
Protection of persons and equipment by enclosures. Probes for verification — 30 стр.
BS EN 61140:2002
Заменен
Protection against electric shock. Common aspects for installation and equipment — 48 стр.
BS EN 61730-1:2007
Заменен
Photovoltaic (PV) module safety qualification. Requirements for construction — 22 стр.
BS EN 61730-2:2007
Действует
Photovoltaic (PV) module safety qualification. Requirements for testing — 38 стр.
BS EN 62852:2015
Действует
Connectors for DC-application in photovoltaic systems. Safety requirements and tests — 44 стр.
ÖNORM EN ISO 868:2003-09
Действует
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
ÖNORM EN ISO 4892-2:2013-06
Заменен
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
ÖNORM EN ISO 4892-3:2006-05
Заменен
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2006)