Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыSAE

SAE AS5406D

Действует
FITTING, UNION, TUBE, .375 BULKHEAD
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

SAE AMS2472H
Действует
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Dyed Coatings
SAE AMS2486F
Действует
Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
SAE AMS2488E
Действует
Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
SAE AMS4124F
Действует
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
SAE AMS4140K
Действует
Aluminum Alloy Die Forgings 4.0Cu - 2.0Ni - 0.68Mg (2018-T61) Solution and Precipitation Heat Treated (Stabilized: Dec 2014)
SAE AMS4339C
Действует
Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu - 1.5Mg - 0.60Mn (2024-T851) Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS4928W
Действует
Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed
SAE AMS5639K
Действует
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging and Ring Stock 19Cr - 10Ni Solution Heat Treated
SAE AMS5645T
Действует
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated
SAE AMS5648N
Действует
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated
SAE AMS6370R
Действует
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
SAE AMS6382S
Действует
Steel, Bars, Forgings, Rings, and Stock for Forging or Flash Welded Rings Aircraft Quality 0.95Cr - 0.20Mo (0.38 - 0.43C) (4140) Annealed
SAE AMSQQA225/6B
Действует
Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished (Stabilized: Mar 2018)
SAE AMSQQA225/9A
Действует
Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished (Stabilized: Jul 2014)
SAE AMSQQP416G
Действует
Plating, Cadmium (Electrodeposited)
SAE AMSQQS763D
Действует
Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings (Stabilized: Mar 2015)
SAE ARP1942A
Действует
Across Hex Corner Dimension for Fluid Fittings and Nuts
SAE AS4296A
Действует
Drawing Interpretation and Standard Machining Practices, Couplings, Fittings, and Hose Ends, Fluid Systems
SAE AS4396B
Действует
FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD
SAE AS478S
Действует
Identification Marking Methods
SAE AS4841D
Действует
Fittings, 37 Degree Internal Flare, Fluid Connection, Procurement Specification
SAE AS5406C
Заменен
FITTING, UNION, TUBE, .375 BULKHEAD

На этот документ ссылаются

SAE AS529A
Отменен
Adapter - 10.000 Bolt Circle to 6.500 Pilot Diameter - QAD (Noncurrent: Oct 2001)
SAE AS5406A
Заменен
FITTING, UNION, TUBE, .375 BULKHEAD
SAE AS5406B
Заменен
FITTING, UNION, TUBE, .375 BULKHEAD
SAE AS5406C
Заменен
FITTING, UNION, TUBE, .375 BULKHEAD
SAE AS683D
Заменен
Installation Procedures and Torques for Fluid Connections
SAE AS683E
Действует
Installation Procedures and Torques for Fluid Connections
SAE AS5406
Заменен
FITTING, UNION, TUBE, .375 BULKHEAD
AS500-7
Действует
AS500-549 Labels
SAE AS529
Заменен
ADAPTER - 10.000 BOLT CIRCLE TO 6.500 PILOT DIAMETER - QAD (Noncurrent: May 1993)