Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM F412-09

Заменен
Standard Terminology Relating to Plastic Piping Systems — 16 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM F1760-01(2011)
Заменен
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content — 7 стр.
ASTM F1488-09e1
Заменен
Standard Specification for Coextruded Composite Pipe — 11 стр.
ASTM F1499-12
Заменен
Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) — 9 стр.
ASTM C114-11b
Заменен
Standard Test Methods for Chemical Analysis of Hydraulic Cement — 32 стр.
ASTM D256-10
Заменен
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics — 20 стр.
ASTM D638-10
Заменен
Standard Test Method for Tensile Properties of Plastics — 16 стр.
ASTM D648-07
Заменен
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position (Withdrawn 2016) — 13 стр.
ASTM D747-10
Отменен
Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (Withdrawn 2019) — 6 стр.
ASTM D790-10
Заменен
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials — 11 стр.
ASTM D882-10
Заменен
Standard Test Method for Tensile Properties of Thin Plastic Sheeting — 10 стр.
ASTM D883-11
Заменен
Standard Terminology Relating to Plastics — 15 стр.
ASTM D907-11a
Заменен
Standard Terminology of Adhesives — 12 стр.
ASTM D1003-11e1
Заменен
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics — 7 стр.
ASTM D1238-10
Заменен
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer — 15 стр.
ASTM D1488-00(2006)
Заменен
Standard Test Method for Amylaceous Matter in Adhesives — 2 стр.
ASTM D1505-10
Заменен
Standard Test Method for Density of Plastics by the Density-Gradient Technique — 7 стр.
ASTM D1527-99(2005)
Отменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 (Withdrawn 2014) — 8 стр.
ASTM D1785-06
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 — 11 стр.
ASTM D2104-03
Отменен
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010) — 7 стр.
ASTM D2239-12
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter — 7 стр.
ASTM D2241-09
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) — 9 стр.
ASTM D2282-99(2005)
Отменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Withdrawn 2007) — 6 стр.
ASTM D2444-99(2010)
Заменен
Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) — 9 стр.
ASTM D2447-03
Отменен
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010) — 8 стр.
ASTM D2513-12a
Заменен
Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings — 17 стр.
ASTM D2661-11
Заменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings — 9 стр.
ASTM D2666-96a
Отменен
Standard Specification for Polybutylene (PB) Plastic Tubing (Withdrawn 2005) — 7 стр.
ASTM D2680-01(2009)
Заменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping — 8 стр.
ASTM D2683-10
Заменен
Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing — 7 стр.
ASTM D2737-12e1
Заменен
Standard Specification for Polyethylene (PE) Plastic Tubing — 7 стр.
ASTM D2751-05
Отменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014) — 6 стр.
ASTM D2837-11
Заменен
Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products — 16 стр.
ASTM D2846/D2846M-09be1
Заменен
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems — 12 стр.
ASTM D3035-10
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter — 8 стр.
ASTM D3139-98(2011)
Заменен
Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals — 3 стр.
ASTM D3261-10a
Заменен
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing — 8 стр.
ASTM D3309-96a(2002)
Отменен
Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010) — 11 стр.
ASTM D3350-10a
Заменен
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials — 7 стр.
ASTM F402-05(2012)
Заменен
Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings — 2 стр.
ASTM F405-05
Заменен
Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings — 5 стр.
ASTM F441/F441M-09
Заменен
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 — 7 стр.
ASTM F442/F442M-09
Заменен
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR<span class='unicode'>–;</span>PR) — 8 стр.
ASTM F449-02(2008)
Заменен
Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control — 7 стр.
ASTM F628-08
Заменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core — 9 стр.
ASTM F645-11
Заменен
Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems — 9 стр.
ASTM F714-10
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter — 10 стр.
ASTM F771-99(2005)
Отменен
Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems (Withdrawn 2014) — 9 стр.
ASTM F876-10e1
Заменен
Standard Specification for Crosslinked Polyethylene (PEX) Tubing — 11 стр.
ASTM F877-11a
Заменен
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems — 7 стр.
ASTM F891-10
Заменен
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core — 9 стр.
ASTM F948-94(2011)
Отменен
Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow (Withdrawn 2018) — 6 стр.
ASTM F1025-94(2011)
Заменен
Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe — 3 стр.
ASTM F1335-04
Отменен
Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011) — 11 стр.
ASTM F1473-11
Заменен
Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins — 6 стр.
ASTM F1668-08
Заменен
Standard Guide for Construction Procedures for Buried Plastic Pipe — 16 стр.
ASTM F1733-07
Заменен
Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing — 6 стр.
ASTM F1924-05(2011)
Заменен
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing — 4 стр.
ASTM F1948-05(2011)
Заменен
Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing — 5 стр.
ASTM F1970-05
Заменен
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems — 6 стр.
ASTM F1973-08
Заменен
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems — 5 стр.
ASTM F1986-01(2011)
Отменен
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020) — 12 стр.
ASTM F1987-01(2011)
Отменен
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems (Withdrawn 2020) — 11 стр.
ASTM F2145-09
Заменен
Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing — 4 стр.
ASTM F2158-08
Заменен
Standard Specification for Residential Central-Vacuum Tube and Fittings — 8 стр.
ASTM F2160-10
Заменен
Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD) — 6 стр.
ASTM F2176-02(2009)
Заменен
Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct — 3 стр.
ASTM F412-12
Заменен
Standard Terminology Relating to Plastic Piping Systems — 17 стр.
ASTM F412-07
Заменен
Standard Terminology Relating to Plastic Piping Systems — 16 стр.

На этот документ ссылаются

DD ISO/TS 24817:2006
Действует
Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection — 76 стр.
ASTM E1749-00
Заменен
Standard Terminology Relating to Rigid Wall Relocatable Shelters — 7 стр.
ASTM E1749-05
Заменен
Standard Terminology Relating to Rigid Wall Relocatable Shelters — 7 стр.
ASTM F1760-01(2005)e1
Заменен
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content — 7 стр.
ASTM F1588-96(2002)
Заменен
Standard Test Method for Constant Tensile Load Joint Test (CTLJT) — 4 стр.
ASTM F1588-96(2007)
Заменен
Standard Test Method for Constant Tensile Load Joint Test (CTLJT) — 4 стр.
ASTM F1760-01
Заменен
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content — 7 стр.
ASTM F1735-02
Заменен
Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits — 5 стр.
ASTM F449-02
Заменен
Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control — 7 стр.
ASTM F1735-02e1
Заменен
Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits — 5 стр.
ASTM F645-04
Заменен
Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems — 8 стр.
ASTM F645-02
Заменен
Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems — 8 стр.
ASTM F2018-00e1
Заменен
Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens — 5 стр.
ASTM F1865-02a
Заменен
Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing — 4 стр.
ASTM F405-97
Заменен
Standard Specification for Corrugated Polyethylene (PE) Tubing and Fittings — 5 стр.
ASTM F1961-02a
Заменен
Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing — 7 стр.
ASTM F1176-01
Заменен
Standard Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi — 7 стр.
ASTM F1803-04
Заменен
Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter — 5 стр.
ASTM F1865-02e1
Заменен
Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing — 4 стр.
ASTM F1924-05(2011)
Заменен
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing — 4 стр.
ASTM F2785-09e1
Заменен
Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings — 13 стр.
ASTM F1986-01(2006)
Заменен
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems — 12 стр.
ASTM F1533-01
Заменен
Standard Specification for Deformed Polyethylene (PE) Liner — 4 стр.
ASTM F2098-04e1
Заменен
Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings — 5 стр.
ASTM F1674-05
Заменен
Standard Test Method for Joint Restraint Products for Use with PVC Pipe — 4 стр.
ASTM F1961-02e1
Заменен
Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing — 7 стр.
ASTM F913-02e1
Заменен
Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe — 3 стр.
ASTM F1498-00e1
Заменен
Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings — 11 стр.
ASTM F449-02e1
Заменен
Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control — 7 стр.
ASTM F1698-02
Заменен
Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits — 6 стр.
ASTM F1336-01
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings — 9 стр.
ASTM F1336-02
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings — 10 стр.
ASTM F2263-07
Заменен
Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water — 6 стр.
ASTM F2263-05
Заменен
Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water — 6 стр.
ASTM F2434-05
Заменен
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing — 6 стр.
ASTM F2434-08
Заменен
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing — 6 стр.
ASTM F1948-05
Заменен
Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing — 5 стр.
ASTM F1924-05
Заменен
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing — 4 стр.
ASTM F1924-01
Заменен
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing — 4 стр.
ASTM F2164-02(2007)
Заменен
Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure — 5 стр.
ASTM F2018-00(2006)
Заменен
Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens — 5 стр.
ASTM F1865-02
Заменен
Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing — 5 стр.
ASTM F1488-00e1
Заменен
Standard Specification for Coextruded Composite Pipe — 11 стр.
ASTM F1488-03
Заменен
Standard Specification for Coextruded Composite Pipe — 11 стр.
ASTM F1488-09
Заменен
Standard Specification for Coextruded Composite Pipe — 11 стр.
ASTM F1987-01
Заменен
Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems — 6 стр.
ASTM F913-01
Заменен
Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe — 5 стр.
ASTM F913-02
Заменен
Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe — 3 стр.
ASTM F771-99e1
Заменен
Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems — 9 стр.
ASTM F1735-02(2008)
Заменен
Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits — 5 стр.
ASTM F2263-07e1
Заменен
Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water — 6 стр.
ASTM F1948-99ae1
Заменен
Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing — 5 стр.
ASTM F1948-05(2011)
Заменен
Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing — 5 стр.
ASTM F949-01a
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings — 10 стр.
ASTM F949-06a
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings — 10 стр.
ASTM F1335-98e1
Заменен
Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service — 12 стр.
ASTM F1987-01(2006)
Заменен
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems — 12 стр.
ASTM F1924-01e1
Заменен
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing — 4 стр.
ASTM F1417-92(2005)
Заменен
Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air — 5 стр.
ASTM F1986-01
Заменен
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems — 12 стр.
ASTM F667-06
Заменен
Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings — 5 стр.
ASTM F2785-10
Заменен
Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings — 13 стр.
ASTM F2262-05
Заменен
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9 — 10 стр.
ASTM F2262-04
Заменен
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9 — 8 стр.
ASTM F794-03
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter — 7 стр.
ASTM F794-01
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter — 7 стр.
ASTM F1947-04
Заменен
Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits — 5 стр.
ASTM F1804-03
Заменен
Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation — 2 стр.
ASTM F481-97(2002)
Заменен
Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields — 4 стр.
ASTM F2737-10a
Заменен
Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units — 5 стр.
ASTM F1961-02
Заменен
Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing — 7 стр.
ASTM F2098-04
Заменен
Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings — 5 стр.
ASTM F949-09
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings — 11 стр.
ASTM F949-01
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings — 10 стр.
ASTM F949-03
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings — 10 стр.
ASTM F949-06
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings — 10 стр.
ASTM F656-02
Заменен
Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings — 3 стр.
ASTM F656-08
Заменен
Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings — 3 стр.
ASTM F1417-11
Заменен
Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air — 6 стр.
ASTM F1290-98a(2004)
Заменен
Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings — 3 стр.
ASTM F1865-02a(2009)
Заменен
Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing — 5 стр.
ASTM F2720/F2720M-08
Заменен
Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe — 7 стр.
ASTM F2785-09
Заменен
Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings — 13 стр.
ASTM F2737-10
Заменен
Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units — 5 стр.
ASTM F2657-07
Заменен
Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing — 5 стр.
ASTM F2619/F2619M-07
Заменен
Standard Specification for High-Density Polyethylene (PE) Line Pipe — 13 стр.
ASTM F2561-06
Заменен
Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner — 4 стр.
ASTM F2434-04
Заменен
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing — 6 стр.
ASTM F2433-05
Заменен
Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness — 6 стр.
ASTM F2303-03
Заменен
Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits — 4 стр.
ASTM F2350-04
Заменен
Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems — 3 стр.
ASTM F2263-03
Заменен
Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water — 7 стр.
ASTM F2262-03
Заменен
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9 — 8 стр.
ASTM F2164-02
Заменен
Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure — 5 стр.
ASTM F2098-01
Заменен
Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings — 7 стр.
ASTM F1924-98
Заменен
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing — 4 стр.
ASTM F1948-99a
Заменен
Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing — 5 стр.
ASTM F2018-00
Заменен
Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens — 5 стр.
ASTM F1987-00a
Заменен
Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems — 6 стр.
ASTM F1986-00a
Заменен
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems — 12 стр.