Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM F412-12

Заменен
Standard Terminology Relating to Plastic Piping Systems — 17 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM F714-12a
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter — 12 стр.
ASTM F2176-02(2009)
Заменен
Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct — 3 стр.
ASTM D2104-03
Отменен
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010) — 7 стр.
ASTM F771-99(2005)
Отменен
Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems (Withdrawn 2014) — 9 стр.
ASTM F1668-08
Заменен
Standard Guide for Construction Procedures for Buried Plastic Pipe — 16 стр.
ASTM F2145-09
Заменен
Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing — 4 стр.
ASTM F2158-08
Заменен
Standard Specification for Residential Central-Vacuum Tube and Fittings — 8 стр.
ASTM F2160-10
Заменен
Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD) — 6 стр.
ASTM F628-12
Заменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core — 10 стр.
ASTM F645-12
Заменен
Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems — 14 стр.
ASTM D648-07
Заменен
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position (Withdrawn 2016) — 13 стр.
ASTM D747-10
Отменен
Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (Withdrawn 2019) — 6 стр.
ASTM F876-10e1
Заменен
Standard Specification for Crosslinked Polyethylene (PEX) Tubing — 11 стр.
ASTM F877-11a
Заменен
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems — 7 стр.
ASTM F891-10
Заменен
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core — 9 стр.
ASTM F948-94(2011)
Отменен
Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow (Withdrawn 2018) — 6 стр.
ASTM F1025-94(2011)
Заменен
Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe — 3 стр.
ASTM F1335-04
Отменен
Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011) — 11 стр.
ASTM F1473-11
Заменен
Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins — 6 стр.
ASTM F1488-09e1
Заменен
Standard Specification for Coextruded Composite Pipe — 11 стр.
ASTM F1499-12
Заменен
Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) — 9 стр.
ASTM D2239-12a
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter — 7 стр.
ASTM D2241-09
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) — 9 стр.
ASTM D2282-99(2005)
Отменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Withdrawn 2007) — 6 стр.
ASTM D2444-99(2010)
Заменен
Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) — 9 стр.
ASTM D1785-12
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 — 11 стр.
ASTM D882-12
Заменен
Standard Test Method for Tensile Properties of Thin Plastic Sheeting — 11 стр.
ASTM D883-12
Заменен
Standard Terminology Relating to Plastics — 16 стр.
ASTM D907-12a
Заменен
Standard Terminology of Adhesives — 13 стр.
ASTM D1003-11e1
Заменен
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics — 7 стр.
ASTM D1079-10
Заменен
Standard Terminology Relating to Roofing and Waterproofing — 10 стр.
ASTM D1238-10
Заменен
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer — 15 стр.
ASTM D1488-00(2006)
Заменен
Standard Test Method for Amylaceous Matter in Adhesives — 2 стр.
ASTM D1505-10
Заменен
Standard Test Method for Density of Plastics by the Density-Gradient Technique — 7 стр.
ASTM D1527-99(2005)
Отменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 (Withdrawn 2014) — 8 стр.
ASTM D790-10
Заменен
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials — 11 стр.
ASTM D2447-03
Отменен
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010) — 8 стр.
ASTM D2513-12ae1
Заменен
Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings — 17 стр.
ASTM D2661-11
Заменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings — 9 стр.
ASTM D2666-96a
Отменен
Standard Specification for Polybutylene (PB) Plastic Tubing (Withdrawn 2005) — 7 стр.
ASTM D2680-01(2009)
Заменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping — 8 стр.
ASTM D2683-10
Заменен
Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing — 7 стр.
ASTM D2737-12a
Заменен
Standard Specification for Polyethylene (PE) Plastic Tubing — 7 стр.
ASTM D2751-05
Отменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014) — 6 стр.
ASTM D2837-11
Заменен
Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products — 16 стр.
ASTM F449-02(2008)
Заменен
Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control — 7 стр.
ASTM C114-11b
Заменен
Standard Test Methods for Chemical Analysis of Hydraulic Cement — 32 стр.
ASTM D256-10
Заменен
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics — 20 стр.
ASTM D638-10
Заменен
Standard Test Method for Tensile Properties of Plastics — 16 стр.
ASTM F1986-01(2011)
Отменен
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020) — 12 стр.
ASTM F1987-01(2011)
Отменен
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems (Withdrawn 2020) — 11 стр.
ASTM F1733-07
Заменен
Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing — 6 стр.
ASTM F1760-01(2011)
Заменен
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content — 7 стр.
ASTM F1924-12
Заменен
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing — 5 стр.
ASTM F1948-12
Заменен
Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing — 5 стр.
ASTM F1970-12
Заменен
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems — 7 стр.
ASTM F1973-12
Заменен
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems — 5 стр.
ASTM D2846/D2846M-09be1
Заменен
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems — 12 стр.
ASTM D3035-12e1
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter — 8 стр.
ASTM D3139-98(2011)
Заменен
Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals — 3 стр.
ASTM D3261-12
Заменен
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing — 8 стр.
ASTM D3309-96a(2002)
Отменен
Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010) — 11 стр.
ASTM D3350-12
Заменен
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials — 7 стр.
ASTM F402-05(2012)
Заменен
Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings — 2 стр.
ASTM F405-05
Заменен
Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings — 5 стр.
ASTM F441/F441M-12
Заменен
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 — 7 стр.
ASTM F442/F442M-12
Заменен
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–;PR) — 7 стр.
ASTM F412-13
Заменен
Standard Terminology Relating to Plastic Piping Systems — 18 стр.
ASTM F412-09
Заменен
Standard Terminology Relating to Plastic Piping Systems — 16 стр.

На этот документ ссылаются

ASTM F645-12
Заменен
Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems — 14 стр.
ASTM F645-11
Заменен
Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems — 9 стр.
ASTM F1498-08
Заменен
Standard Specification for Taper Pipe Threads 60<span class='unicode'>&#x00B0;</span> for Thermoplastic Pipe and Fittings — 13 стр.
ASTM F2164-10
Заменен
Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure — 5 стр.
ASTM F1804-08
Заменен
Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation — 2 стр.
ASTM F2785-10a
Заменен
Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings — 13 стр.
ASTM F2736-10
Заменен
Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe — 6 стр.
ASTM F2390-07
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content — 7 стр.
ASTM D5813-04(2008)
Заменен
Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems — 4 стр.
ASTM F2306/F2306M-11
Заменен
Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications — 7 стр.
ASTM F2510/F2510M-07
Заменен
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes — 3 стр.
ASTM F1973-08
Заменен
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems — 5 стр.
ASTM F2487-06
Заменен
Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene Pipelines — 2 стр.
ASTM F2435-07
Заменен
Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe — 7 стр.
ASTM D4024-05
Заменен
Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges — 5 стр.
ASTM D2235-88
Заменен
Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings — 5 стр.
ASTM F409-02(2008)
Заменен
Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings — 14 стр.
ASTM F1055-11
Заменен
Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing — 8 стр.
ASTM F1055-12
Заменен
Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing — 10 стр.
ASTM D3035-10
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter — 8 стр.
ASTM D2737-12e1
Заменен
Standard Specification for Polyethylene (PE) Plastic Tubing — 7 стр.
ASTM D2239-12
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter — 7 стр.
ASTM D3035-12
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter — 8 стр.
ASTM F2080-09
Заменен
Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe — 7 стр.
ASTM F1807-11ae1
Заменен
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing — 7 стр.
ASTM F1483-05
Заменен
Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe — 5 стр.
ASTM F1970-05
Заменен
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems — 6 стр.
ASTM F442/F442M-09
Заменен
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR<span class='unicode'>–;</span>PR) — 8 стр.
ASTM F441/F441M-09
Заменен
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 — 7 стр.
ASTM F2648/F2648M-11
Заменен
Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications — 8 стр.
ASTM F1173-01(2006)
Заменен
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications — 15 стр.
ASTM F628-91
Заменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core — 8 стр.
ASTM F628-08
Заменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core — 9 стр.
ASTM D6040-06
Заменен
Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape — 3 стр.
ASTM F512-06
Заменен
Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation — 8 стр.
ASTM F714-12e1
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter — 12 стр.
ASTM F714-12
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter — 12 стр.
ASTM D3261-10a
Заменен
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing — 8 стр.
ASTM F2509-06(2012)
Заменен
Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing — 3 стр.
ASTM F2658-07
Заменен
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings — 10 стр.
ASTM F439-11
Заменен
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 — 7 стр.
ASTM D2665-91
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings — 6 стр.
ASTM D2665-91a
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings — 6 стр.
ASTM D2665-91b
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings — 6 стр.
ASTM F810-07
Заменен
Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields — 4 стр.
ASTM D2467-06
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 — 8 стр.
ASTM F2767-09
Заменен
Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution — 10 стр.
ASTM D2661-91
Заменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings — 8 стр.
ASTM F1960-11e1
Заменен
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing — 7 стр.
ASTM D2564-04(2009)e1
Заменен
Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems — 5 стр.
ASTM D2564-91a
Заменен
Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems — 4 стр.
ASTM D2564-91
Заменен
Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems — 4 стр.
ASTM D2513-12a
Заменен
Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings — 17 стр.
ASTM F412-13
Заменен
Standard Terminology Relating to Plastic Piping Systems — 18 стр.
ASTM F412-09
Заменен
Standard Terminology Relating to Plastic Piping Systems — 16 стр.
ASTM D2310-06
Заменен
Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe — 4 стр.
ASTM D2924-01(2006)
Заменен
Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe — 4 стр.
ASTM D4797-88(2007)
Заменен
Standard Test Methods for Chemical and Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking Containing Lead Chromate and Titanium Dioxide — 4 стр.