Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM F412-16a

Заменен
Standard Terminology Relating to Plastic Piping Systems — 19 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM F714-13
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter — 12 стр.
ASTM F1473-16
Заменен
Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins — 7 стр.
ASTM F1488-14
Заменен
Standard Specification for Coextruded Composite Pipe — 12 стр.
ASTM F1499-12
Заменен
Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) — 9 стр.
ASTM D3139-98(2011)
Заменен
Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals — 3 стр.
ASTM D3261-16
Заменен
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing — 8 стр.
ASTM D3309-96a(2002)
Отменен
Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010) — 11 стр.
ASTM D3350-14
Заменен
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials — 8 стр.
ASTM F402-05(2012)
Заменен
Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings — 2 стр.
ASTM F405-13
Отменен
Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings (Withdrawn 2015) — 5 стр.
ASTM F441/F441M-15
Заменен
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 — 8 стр.
ASTM F771-99(2005)
Отменен
Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems (Withdrawn 2014) — 9 стр.
ASTM F442/F442M-13e1
Заменен
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR) — 8 стр.
ASTM F1970-12e1
Заменен
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems — 7 стр.
ASTM F1973-13e1
Заменен
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems — 6 стр.
ASTM C114-15
Заменен
Standard Test Methods for Chemical Analysis of Hydraulic Cement — 32 стр.
ASTM D256-10e1
Заменен
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics — 20 стр.
ASTM D747-10
Отменен
Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (Withdrawn 2019) — 6 стр.
ASTM D790-15e2
Заменен
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials — 12 стр.
ASTM D882-12
Заменен
Standard Test Method for Tensile Properties of Thin Plastic Sheeting — 11 стр.
ASTM D638-14
Заменен
Standard Test Method for Tensile Properties of Plastics — 17 стр.
ASTM D648-16
Заменен
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position — 14 стр.
ASTM F876-15a
Заменен
Standard Specification for Crosslinked Polyethylene (PEX) Tubing — 11 стр.
ASTM D2683-14
Заменен
Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing — 6 стр.
ASTM D2737-12a
Заменен
Standard Specification for Polyethylene (PE) Plastic Tubing — 7 стр.
ASTM D2447-03
Отменен
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010) — 8 стр.
ASTM D2751-05
Отменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014) — 6 стр.
ASTM D2837-13e1
Заменен
Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products — 16 стр.
ASTM D2846/D2846M-14
Заменен
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems — 12 стр.
ASTM D3035-15
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter — 9 стр.
ASTM D2239-12a
Заменен
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter — 7 стр.
ASTM D2241-15
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) — 9 стр.
ASTM D2282-99(2005)
Отменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Withdrawn 2007) — 6 стр.
ASTM F877-11a
Заменен
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems — 7 стр.
ASTM D2444-99(2010)
Заменен
Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) — 9 стр.
ASTM D1003-13
Заменен
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics — 7 стр.
ASTM D883-12e1
Заменен
Standard Terminology Relating to Plastics — 16 стр.
ASTM D907-15
Заменен
Standard Terminology of Adhesives — 13 стр.
ASTM D1079-16
Заменен
Standard Terminology Relating to Roofing and Waterproofing — 10 стр.
ASTM D1238-13
Заменен
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer — 16 стр.
ASTM D1488-00(2013)
Заменен
Standard Test Method for Amylaceous Matter in Adhesives — 2 стр.
ASTM D1505-10
Заменен
Standard Test Method for Density of Plastics by the Density-Gradient Technique — 7 стр.
ASTM D1527-99(2005)
Отменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 (Withdrawn 2014) — 8 стр.
ASTM D1785-15
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 — 11 стр.
ASTM F891-16
Заменен
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core — 9 стр.
ASTM D2104-03
Отменен
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010) — 7 стр.
ASTM F1986-01(2011)
Отменен
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020) — 12 стр.
ASTM F1987-01(2011)
Отменен
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems (Withdrawn 2020) — 11 стр.
ASTM F1668-16
Заменен
Standard Guide for Construction Procedures for Buried Plastic Pipe — 16 стр.
ASTM F1733-13
Заменен
Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing — 7 стр.
ASTM F1760-16
Заменен
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content — 8 стр.
ASTM F1924-12
Заменен
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing — 5 стр.
ASTM F1948-15
Заменен
Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing — 6 стр.
ASTM D2513-16a
Заменен
Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings — 18 стр.
ASTM D2661-14
Заменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings — 9 стр.
ASTM F948-94(2011)
Отменен
Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow (Withdrawn 2018) — 6 стр.
ASTM D2666-96a
Отменен
Standard Specification for Polybutylene (PB) Plastic Tubing (Withdrawn 2005) — 7 стр.
ASTM D2680-01(2014)
Заменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping — 8 стр.
ASTM F2145-13
Заменен
Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing — 5 стр.
ASTM F2158-08(2016)
Заменен
Standard Specification for Residential Central-Vacuum Tube and Fittings — 8 стр.
ASTM F2160-16
Заменен
Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD) — 7 стр.
ASTM F2176-02(2009)
Заменен
Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct — 3 стр.
ASTM F2623-14
Заменен
Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing — 7 стр.
ASTM F2769-16
Заменен
Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems — 10 стр.
ASTM F2788/F2788M-15
Заменен
Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe — 12 стр.
ASTM F2818-10(2014)e1
Заменен
Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing — 7 стр.
ASTM F1025-94(2011)
Заменен
Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe — 3 стр.
ASTM F2829/F2829M-15
Заменен
Standard Specification for Metric- and Inch-Sized Crosslinked Polyethylene (PEX) Pipe Systems — 5 стр.
ASTM F2905/F2905M-13
Заменен
Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications — 9 стр.
ASTM F2929-13
Заменен
Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig — 9 стр.
ASTM F2968/F2968M-14a
Заменен
Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications — 9 стр.
ASTM F449-16
Заменен
Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control — 8 стр.
ASTM F628-12e2
Заменен
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core — 10 стр.
ASTM F645-15a
Заменен
Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems — 13 стр.
ASTM F1281-11
Заменен
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe — 12 стр.
ASTM F1335-04
Отменен
Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011) — 11 стр.
ASTM F412-17
Заменен
Standard Terminology Relating to Plastic Piping Systems — 20 стр.
ASTM F412-16
Заменен
Standard Terminology Relating to Plastic Piping Systems — 18 стр.

На этот документ ссылаются

ASTM F667/F667M-15
Заменен
Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings — 5 стр.
ASTM F3123-15
Заменен
Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN) — 11 стр.
ASTM F3123-15a
Заменен
Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN) — 11 стр.
ASTM F1743-08(2016)
Заменен
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP) — 8 стр.
ASTM F1807-15
Заменен
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing — 8 стр.
ASTM D5677-16
Заменен
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines — 6 стр.
ASTM F412-16
Заменен
Standard Terminology Relating to Plastic Piping Systems — 18 стр.
ASTM F412-17
Заменен
Standard Terminology Relating to Plastic Piping Systems — 20 стр.
ASTM F2389-17
Заменен
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems — 10 стр.
ASTM D2513-16
Заменен
Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings — 17 стр.