Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes; German version EN 10088-2:2005— 48 стр.
Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2013); German version EN ISO 377:2013— 25 стр.
Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998)
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes; German version EN 10088-2:2014— 50 стр.
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems; German version EN 14868:2005— 26 стр.
Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above; German version EN 14015:2004— 240 стр.
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components; German version EN 14620-2:2006— 58 стр.
Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction; German version EN 14208:2004— 44 стр.
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate; German version EN 14879-1:2005— 40 стр.
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C; German version EN 14394:2005— 127 стр.
Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods; German version EN 14638-1:2006— 40 стр.
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C; German version EN 14394:2005+A1:2008— 134 стр.
Sterilization - Low temperature sterilizers - Part 7: Requirements on the installation and requirements on the service supply for ethylene oxide sterilizers— 11 стр.
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1124-1:1999 + A1:2004— 26 стр.
Separator systems for light liquids (e. g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control; German version EN 858-1:2002 + A1:2004— 61 стр.
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity; German version EN 1433:2002 + AC:2004 + A1:2005— 60 стр.
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel; German version EN 508-3:2000— 25 стр.
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance; German version EN 877:1999— 25 стр.
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking; German version EN 303-1:1999— 19 стр.
Heating boilers - Part 4: Heating boilers with forced draught burners; special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar; terminology, special requirements, testing and marking; German version EN 303-4:1999— 20 стр.
Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components; German version EN 1090-1:2009— 45 стр.
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of capacity from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of stainless steel with a maximum R<(Index)m> value of less than 1100 MPa; German version EN 1964-3:2000— 54 стр.
Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control; German version EN 858-1:2002— 38 стр.
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity; German version EN 1433:2002— 57 стр.
Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning - Dimensions, masses; German and English version EN 4113:2009— 22 стр.
Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning - Dimensions, masses; German and English version EN 4113:2009— 22 стр.
Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery; German version EN 12763:2000— 27 стр.
Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods; German version EN 12809:2001 + A1:2004— 72 стр.
Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 2: Stainless steel; German version EN 13322-2:2003— 48 стр.
Wastewater treatment plants - Part 13: Chemical treatment; Treatment of wastewater by precipitation/flocculation; German version EN 12255-13:2002— 16 стр.
Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 2: Stainless steel; German version EN 13322-2:2003 + A1:2006— 48 стр.
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels; German version EN 12502-4:2004— 15 стр.
Food processing machinery - Bulk milk coolers on farms - Requirements for construction, performance, suitability for use, safety and hygiene; German version EN 13732:2002— 59 стр.
Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005— 31 стр.
Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances of dimensions and shape (includes Amendment A1:1997); German version EN 10051:1991 + A1:1997— 16 стр.
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes; German version EN 10088-2:2014— 50 стр.
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes; German version EN 10088-3:1995— 34 стр.
Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions; German version EN 10312:2002— 27 стр.
