Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыISO

ISO 3452-2:2013

Действует
Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials — 30 стр.
ОписаниеИзмененияСсылкиВерсии

На этот документ ссылаются

BS EN 14765:2005+A1:2008
Заменен
Bicycles for young children. Safety requirements and test methods — 52 стр.
BS EN 14764:2005
Заменен
City and trekking bicycles. Safety requirements and test methods — 90 стр.
BS EN 14781:2005
Заменен
Racing bicycles. Safety requirements and test methods — 84 стр.
BS EN 14766:2005
Заменен
Mountain-bicycles. Safety requirements and test methods — 92 стр.
BS EN ISO 23277:2009
Заменен
Non-destructive testing of welds. Penetrant testing of welds. Acceptance levels — 12 стр.
BS EN ISO 4210-2:2014
Заменен
Cycles. Safety requirements for bicycles. Requirements for city and trekking, young adult, mountain and racing bicycles — 46 стр.
BS ISO 17296-3:2014
Действует
Additive manufacturing. General principles. Main characteristics and corresponding test methods — 26 стр.
BS EN ISO 15614-7:2007
Заменен
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Overlay welding — 34 стр.
BS EN ISO 8098:2014
Действует
Cycles. Safety requirements for bicycles for young children — 54 стр.
BS EN ISO 3452-6:2008
Действует
Non-destructive testing. Penetrant testing. Penetrant testing at temperatures lower than 10 $0DC — 16 стр.
BS EN ISO 3452-1:2013
Действует
Non-destructive testing. Penetrant testing. General principles — 34 стр.
BS EN ISO 17296-3:2016
Действует
Additive manufacturing. General principles. Main characteristics and corresponding test methods — 26 стр.
BS EN 10228-2:2016
Действует
Non-destructive testing of steel forgings. Penetrant testing — 14 стр.
BS EN 1371-2:2015
Действует
Founding. Liquid penetrant testing. Investment castings — 22 стр.
BS EN 16603-32-01:2014
Действует
Space engineering. Fracture control — 86 стр.
PD CEN/TR 16638:2014
Действует
Non-destructive testing. Penetrant and magnetic particle testing using blue light — 20 стр.
BS EN ISO 10893-4:2011
Действует
Non-destructive testing of steel tubes. Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections — 16 стр.
BS EN ISO 11243:2016
Действует
Cycles. Luggage carriers for bicycles. Requirements and test methods — 30 стр.
18/30338004 DC
Действует
BS ISO 20890-2. In-service inspections for primary coolant circuit components of light water reactors. Part 2. Magnetic particle and penetrant testing — 19 стр.
BS EN ISO 4210-2:2015
Действует
Cycles. Safety requirements for bicycles. Requirements for city and trekking, young adult, mountain and racing bicycles — 42 стр.
BS EN ISO 23277:2015
Действует
Non-destructive testing of welds. Penetrant testing. Acceptance levels — 12 стр.
ÖNORM EN 2583:1997-05
Заменен
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa (at ambient temperature) / 650 °C - .....(abbreviated)
ÖNORM EN 3818:2006-01
Заменен
Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1 100 MPa (at ambient temperature) - Technical specification
ÖNORM EN 3299:2008-01
Заменен
Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification
ÖNORM EN 3833:2005-03
Заменен
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 °C - Technical specification
ÖNORM EN ISO 23277:2009-12
Заменен
Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (ISO 23277:2006)
ÖNORM EN ISO 15614-7:2010-09
Заменен
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2007)
ÖNORM EN ISO 3452-1:2013-10
Заменен
Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013)
ÖVE/ÖNORM EN 61952:2009-08
Действует
Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria (IEC 61952:2008) (english version)
ÖNORM EN ISO 10893-4:2011-07
Действует
Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011)
ÖNORM EN ISO 10424-1:2005-03
Действует
Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements (ISO 10424-1:2004)
ÖNORM EN ISO 15614-6:2007-01
Действует
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)
ÖNORM EN ISO 3452-1:2016-10
Действует
Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, corrected version 2014-05-01)
ÖNORM EN ISO 3452-6:2009-03
Действует
Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008)
ÖNORM EN 3752:2006-01
Действует
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C - Technical specification
ÖNORM EN 3388:2009-06
Действует
Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification 1 275 MPa/650 °C - Manufacturing method optional - Technical specification
ÖNORM EN 2002-16:2020-04
Действует
Aerospace series - Metallic materials - Test methods - Part 16: Non-destructive testing - Penetrant testing
ÖNORM EN 3043:2008-11
Действует
Aerospace series - Fasteners, exernally, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa/650 °C, manufacturing method optional - Technical specification
ÖNORM EN 3899:2005-03
Действует
Aerospace series - Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH) - Technical specification
ÖNORM EN 4458:2006-05
Действует
Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature) - Technical specification
ÖNORM EN 4047:2005-04
Действует
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature) / 600 °C - Technical specification
ÖNORM EN 3915:2008-10
Действует
Aerospace series - Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components - Classification: 1 275 MPa (at ambient temperature) / 550 °C - Technical specification
ÖNORM EN 4585:2004-05
Действует
Aerospace series - Clips, spring tension - Technical specification
ÖNORM EN 4048:2005-04
Действует
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1 550 MPa (at ambient temperature) / 425 °C - Technical specification
ÖNORM EN 3005:2006-01
Действует
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated - Classification: 1 210 MPa (at ambient temperature) / 730 °C - Technical specification
ÖNORM EN 3004:1997-05
Действует
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa (at ambient temperature) / 650 °C - Technical specification
ÖNORM EN 3152:2006-01
Действует
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated - Classification: 1 100 MPa (at ambient temperature) / 425 °C - Technical specification
ÖNORM EN 3297:1998-04
Действует
Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification
ÖNORM EN ISO 23277:2015-06
Действует
Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)