Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыON

ÖNORM EN 312:2010-10

Действует
Particleboards - Specifications
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

ÖNORM EN 120:1993-02
Заменен
Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method
ÖNORM EN 309:2005-04
Действует
Particleboards - Definition and classification
ÖNORM EN 310:2005-12
Действует
Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ÖNORM EN 311:2002-08
Действует
Wood-based panels - Surface soundness - Test method
ÖNORM EN 317:2005-12
Действует
Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
ÖNORM EN 318:2002-05
Действует
Wood based panels - Determination of dimensional changes associated with changes in relative humidity
ÖNORM EN 319:2005-12
Действует
Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board
ÖNORM EN 321:2002-03
Действует
Wood-based panels - Determination of moisture resistance under cyclic test conditions
ÖNORM EN 322:2005-12
Действует
Wood-based panels - Determination of moisture content
ÖNORM EN 323:2005-12
Действует
Wood-based panels - Determination of density
ÖNORM EN 324-1:2005-12
Действует
Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length
ÖNORM EN 324-2:2005-12
Действует
Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness
ÖNORM EN 326-1:2005-12
Действует
Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
ÖNORM EN 326-2:2014-09
Действует
Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
ÖNORM EN 326-3:2004-02
Действует
Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
ÖNORM EN 717-1:2005-02
Действует
Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method
ÖNORM EN 1087-1:1995-04
Действует
Particleboards - Determination of moisture resistance - Part 1: Boil test
ÖNORM EN 12871:2010-05
Заменен
Wood-based panels - Performance specifications and requirements for load bearing boards for use in floors, walls and roofs
BS EN 13986:2004
Действует
Wood-based panels for use in construction. Characteristics, evaluation of conformity and marking — 60 стр.
ISO 3340:1976
Действует
Fibre building boards; Determination of sand content — 8 стр.
ÖNORM EN 3120:2012-03
Действует
Aerospace series - Titanium alloy TI-P64003 - Cold worked and stress relieved - Seamless tube for pressure systems - D from 4 mm up to 51 mm - Rm from 690 MPa up to 1 030 MPa

На этот документ ссылаются

ÖNORM EN 1457-1:2012-04
Заменен
Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods
ÖNORM EN 1995-1-1:2015-06
Заменен
Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (consolidated version)
ÖNORM EN 1995-1-1:2009-07
Заменен
Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (consolidated version)
ÖNORM EN 1995-1-1:2014-11
Заменен
Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (consolidated version)
ÖNORM EN 17333-2:2020-05
Действует
Characterisation of one component foam - Part 2: Expansion characteristics
ÖNORM EN 438-2:2005-05
Заменен
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called Laminates) - Part 2: Determination of properties
ÖNORM EN 438-2:2016-05
Заменен
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
ÖNORM EN 12871:2010-05
Заменен
Wood-based panels - Performance specifications and requirements for load bearing boards for use in floors, walls and roofs
ÖNORM EN 13964:2014-04
Заменен
Suspended ceilings - Requirements and test methods
ÖNORM EN 13964:2007-03
Заменен
Suspended ceilings - Requirements and test methods (consolidated version)
ÖNORM EN 13986:2005-04
Заменен
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
ÖNORM EN 14974:2010-12
Заменен
Facilities for users of roller sports equipment - Safety requirements and test methods
ÖNORM EN 13381-1:2014-11
Заменен
Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
ÖNORM EN 15101-1:2013-11
Заменен
Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation
ÖNORM ENV 13381-7:2002-12
Заменен
Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members
ÖNORM EN 17333-2:2020-07
Действует
Characterisation of one component foam - Part 2: Expansion characteristics
ÖNORM EN 17101:2018-10
Действует
Thermal insulation products for buildings - Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS)
ÖNORM EN 17333-4:2020-05
Действует
Characterisation of one component foam - Part 4: Mechanical strength
ÖNORM EN 295-7:2013-04
Действует
Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
ÖNORM EN 438-2:2019-02
Действует
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
ÖNORM EN 12871:2013-08
Действует
Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
ÖNORM EN 14320-1:2013-02
Действует
Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray system before installation
ÖNORM EN 15715:2010-05
Действует
Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
ÖNORM EN 13986:2015-06
Действует
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
ÖNORM EN 13381-1:2020-11
Действует
Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
ÖNORM EN 13069:2005-12
Действует
Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
ÖNORM EN 15101-1:2019-07
Действует
Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation
ÖNORM EN 14964:2007-01
Действует
Rigid underlays for discontinuous roofing - Definitions and characteristics
ÖNORM EN 13964:2014-09
Действует
Suspended ceilings - Requirements and test methods
ÖNORM EN 14319-1:2013-03
Действует
Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed system before installation
ÖNORM EN 14041:2018-06
Действует
Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics
ÖNORM EN 14974:2019-06
Действует
Skateparks - Safety requirements and test methods
ÖNORM EN 14315-1:2013-03
Действует
Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation
ÖNORM EN 13238:2010-03
Действует
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
ÖNORM EN 14318-1:2013-02
Действует
Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation
OVE EN 50632-3-1:2017-05
Действует
Electric motor-operated tools - Dust measurement procedure -- Part 3-1: Particular requirements for transportable table saws (english version)
OVE EN 50632-2-17:2017-05
Действует
Electric motor-operated tools - Dust measurement procedure -- Part 2-17: Particular requirements for routers and trimmers (english version)
OVE EN 50632-2-11:2017-05
Действует
Electric motor-operated tools - Dust measurement procedure -- Part 2-11: Particular requirements for jig and sabre saws (english version)
OVE EN 50632-2-19:2017-05
Действует
Electric motor-operated tools - Dust measurement procedure -- Part 2-19: Particular requirements for jointers (english version)
OVE EN 50632-2-5:2017-05
Действует
Electric motor-operated tools - Dust measurement procedure -- Part 2-5: Particular requirements for circular saws (english version)
ÖNORM EN 1806:2006-11
Действует
Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
ÖNORM EN 1457-1:2012-08
Действует
Chimney - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods
ÖNORM EN 1995-1-1:2019-06
Действует
Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (consolidated version)
ÖNORM EN 1457-2:2012-03
Действует
Chimney - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods