Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); German version EN ISO 6143:2006— 39 стр.
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific funtional requirements for steel; German version EN 12007-3:2015— 25 стр.
Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance— 24 стр.
Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems— 34 стр.
Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems— 32 стр.
Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) (IEC 61000-3-2:2014) (english version)
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection (IEC 61000-3-3:2013) (english version)
Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current $3L 75 A and subject to conditional connection— 20 стр.
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase (IEC 61000-3-12:2011) (english version)
Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports ( IEC 61000-4-19:2014) (english version)
Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems (IEC 61000-4-25:2001 + A1:2012) (english version)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test (IEC 61000-4-4:2012) (english version)
Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (IEC 61000-4-7:2002 + A1:2008) (english version)
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test (IEC 61000-4-8:2009) (english version)
Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests— 30 стр.
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests (IEC 61000-4-13:2002 + A1:2009) (english version)
Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-14:1999 + A1:2001 + A2:2009) (english version)
Electromagnetic Compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:1998 + A1:2001 + A2:2009) (english version)
Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test (IEC 61000-4-17:1999 + A1:2001 + A2:2008) (english version)
Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances— 100 стр.
Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-27:2000 + A1:2009) (english version)
Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-28:1999 + A1:2001 + A2:2009) (english version)
Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests— 22 стр.
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (IEC 61000-4-34:2005 + A1:2009 + Cor.:2009) (english version)
Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Installation and mitigation guidelines. Degrees of protection by enclosures against electromagnetic disturbances (EM code)— 30 стр.
Electromagnetic compatibility (EMC) -- Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations (IEC 61000-6-7:2014) (english version)
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003); German version EN ISO 5167-1:2003— 41 стр.
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003); German version EN ISO 5167-2:2003— 69 стр.
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 974-1:2012 + Cor 1:2012) (consolidated version)
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012); German version EN ISO 6974-2:2012— 24 стр.
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns (ISO 6974-3:2000)
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:2000)
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons (ISO 6974-5:2014)
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002)
Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997); German version EN ISO 6975:2005, Corrigendum to DIN EN ISO 6975:2005-09— 2 стр.
Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO/DIS 6976:2015); German and English version prEN ISO 6976:2015
Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006); German version EN ISO 12213-2:2009— 39 стр.
Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006); German version EN ISO 12213-3:2009— 44 стр.
Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008); German version EN ISO 15970:2014— 58 стр.
General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005); German and English version EN ISO/IEC 17025:2005, Corrigenda to DIN EN ISO/IEC 17025:2005-08; German and English version EN ISO/IEC 17025:2005/AC:2006— 4 стр.
Uncertainty of measurement -- Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) -- Supplement 2: Extension to any number of output quantities— 84 стр.
Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003); Trilingual version EN ISO 10012:2003— 56 стр.
Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)— 46 стр.
