Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыISO

ISO 1817:2015

Действует
Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids — 30 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

ISO 1817:2011
Заменен
Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids — 24 стр.

На этот документ ссылаются

BS EN ISO 1401:2000
Заменен
Rubber hoses for agricultural spraying — 14 стр.
BS ISO 4081:2010
Заменен
Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification — 24 стр.
BS ISO 16380:2014
Заменен
Road vehicles. Blended fuels refuelling connector — 56 стр.
BS ISO 13775-2:2000
Заменен
Thermoplastic tubing and hoses for automotive use. Petroleum-based fuel applications — 22 стр.
ISO 1817:2011
Заменен
Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids — 24 стр.
BS EN ISO 2398:2016
Действует
Rubber hoses, textile-reinforced, for compressed air. Specification — 18 стр.
BS EN ISO 10088:2013
Заменен
Small craft. Permanently installed fuel systems — 16 стр.
BS ISO 23297:2008
Заменен
Thermoplastics hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification — 26 стр.
BS ISO 11424:2017
Действует
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification — 20 стр.
BS ISO 18797-1:2016
Действует
Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings. Elastomeric coating systems-polychloroprene or EPDM — 38 стр.
BS EN 15649-7:2009
Заменен
Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class E devices — 36 стр.
BS EN 15649-1:2009+A2:2013
Заменен
Floating leisure articles for use on and in the water. Classification, materials, general requirements and test methods — 38 стр.
18/30347939 DC
Действует
BS ISO 20766-6. Road vehicles. Liquefied petroleum gas (LPG) fuel systems components. Part 6. Pressure relief valves (PRV) — 10 стр.
18/30372584 DC
Действует
BS EN 4708-107. Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification. Part 107. Polytetrafluoroethylene (ptfe). Temperature range -65$0DC and 260$0DC. Product Standard — 11 стр.
18/30372567 DC
Действует
BS EN 6111. Aerospace series. Ethylene-propylene elastomer (EPM/EPDM) Hardness 80 I RHD for static seal elements in hydraulic systems for long-term application. Material standard — 9 стр.
18/30371142 DC
Действует
BS ISO 4141-2. Road vehicles. Multi-core connecting cables. Part 2. Test methods and requirements for high performance sheathed cables — 12 стр.
18/30371139 DC
Действует
BS ISO 4141-1. Road vehicles. Multi-core connecting cables. Part 1. Test methods and requirements for basic performance sheathed cables — 20 стр.
18/30365851 DC
Действует
BS EN 1337-5. Structural bearings. Part 5. Pot bearings — 57 стр.
BS EN 2795:2018
Действует
Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 50 IRHD — 8 стр.
BS EN 61300-2-34:2009
Действует
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Resistance to solvents and contaminating fluids of interconnecting components and closures — 12 стр.
BS ISO 12925-1:2018
Действует
Lubricants, industrial oils and related products (class L). Family C (gears). Specifications for lubricants for enclosed gear systems — 52 стр.
BS ISO 9631:2018
Действует
Rubber seals. Joint rings for pipelines for hot-water supply up to 110 $0DC. Specification for the material — 22 стр.
BS ISO 16380:2014+A1:2016
Действует
Road vehicles. Blended fuels refuelling connector — 54 стр.
BS EN ISO/IEC 80079-38:2016
Заменен
Explosive atmospheres. Equipment and components in explosive atmospheres in underground mines — 64 стр.
BS ISO 13226:2011
Заменен
Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers — 38 стр.
18/30380138 DC
Действует
BS EN 60684-3-216. Flexible insulating sleeving. Part 3. Specifications for individual types of sleeving. Sheet 216. Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving — 14 стр.
BS EN 60068-2-74:2000+A1:2018
Действует
Environmental testing. Tests. Test Xc: Fluid contamination — 22 стр.
BS EN ISO 14469:2017
Действует
Road vehicles. Compressed natural gas (CNG) refuelling connector — 46 стр.
18/30384604 DC
Действует
BS EN 4718. Aerospace series. Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) stock shape material. Material specification — 7 стр.
18/30384546 DC
Действует
BS EN 4717. Aerospace series. Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) stock shape material. Material specification — 7 стр.
17/30328799 DC
Действует
BS EN 549. Rubber materials for seals and diaphragms for gas appliances and gas equipment — 31 стр.
BS EN 4708-106:2018
Действует
Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification. Limited fire hazard sleeving. Operating temperatures. 30 $0DC to 105 $0DC. Product standard — 16 стр.
BS EN ISO 21487:2018
Действует
Small craft. Permanently installed petrol and diesel fuel tanks — 16 стр.
BS EN ISO 6185-3:2018
Действует
Inflatable boats. Boats with a hull length less than 8 m with a motor rating of 15 kW and greater — 42 стр.
BS EN ISO 6185-4:2018
Действует
Inflatable boats. Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater — 40 стр.
BS EN 14241-1:2013
Действует
Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods. Seals in flue liners — 24 стр.
BS EN ISO/IEC 80079-38:2016+A1:2018
Действует
Explosive atmospheres. Equipment and components in explosive atmospheres in underground mines — 62 стр.
BS EN 62282-6-100:2010+A1:2012
Действует
Fuel cell technologies. Micro fuel cell power systems. Safety — 376 стр.
BS EN ISO 14113:2013
Действует
Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) — 20 стр.
BS EN ISO 6808:2014
Действует
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification — 24 стр.
BS EN ISO 9539:2010+A1:2013
Действует
Gas welding equipment. Materials for equipment used in gas welding, cutting and allied processes — 10 стр.
BS ISO 17324:2014
Действует
Rubber hoses for automotive turbochargers. Specification — 22 стр.
BS ISO 27126:2014
Действует
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification — 30 стр.
BS ISO 6194-4:2009
Действует
Rotary shaft lip-type seals incorporating elastomeric sealing elements. Performance test procedures — 28 стр.
BS ISO 3384-1:2011+A1:2013
Действует
Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression. Testing at constant temperature — 24 стр.
BS 3G 230:2000
Действует
Specification for general requirements for aircraft electrical cables (second series) — 86 стр.
BS 3G 198-4:1996
Действует
Sleeves for aircraft electric cables and equipment wires, Specification for fluoropolymer heat shrinkable sleeving for binding and insulation — 26 стр.
BS 3G 100-2.3.12:1991
Действует
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions, Fluid contamination — 12 стр.
BS 5G 178-1:1993
Действует
Crimped joints for aircraft electrical cables and wires., Specification for design requirements (including tests) for components and tools — 16 стр.
BS G 246:1991
Действует
Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses — 20 стр.
ÖVE/ÖNORM EN 50571:2015-01
Заменен
Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines (english version)
ÖVE/ÖNORM EN 60079-0:2014-07
Заменен
Explosive atmospheres - Part 0: Equipment - General requirements (IEC 60079-0:2011, modified + Cor.:2012 + Cor.:2013) (english version)
ÖNORM EN 3475-411:2015-02
Заменен
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
ÖNORM EN 3909:2008-04
Заменен
Aerospace series - Test fluids and test methods for electric components and sub-assemblies
ÖNORM EN 1762:2008-09
Заменен
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification (consolidated version)
ÖNORM EN 1765:2005-01
Заменен
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
ÖNORM EN 1375:2003-04
Заменен
Identification card system - Intersector integrated circuit(s) card additional formats - ID-000 card size and physical characteristics
ÖNORM EN 1762:2017-04
Заменен
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
ÖNORM EN ISO 13340:2001-06
Заменен
Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001)
ÖNORM EN ISO 10088:2013-11
Заменен
Small craft - Permanently installed fuel systems (ISO 10088:2013)
ÖNORM EN ISO 21487:2016-03
Заменен
Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012 + Amd.1:2014 + Amd.2:2015) (consolidated version)
ÖNORM EN ISO 21487:2015-02
Заменен
Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012 + Amd 1:2014) (consolidated version)
ÖNORM EN ISO 6134:2006-02
Заменен
Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2005)
ÖNORM EN ISO 6806:2014-12
Заменен
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2014)
ÖNORM EN ISO 5774:2008-06
Заменен
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2006)
ÖNORM EN ISO 6185-3:2014-12
Заменен
Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014)
ÖNORM EN 16084:2012-02
Заменен
Refrigerating systems and heat pumps - Qualification of tightness of components and joints
ÖNORM EN 854:1996-09
Заменен
Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
ÖNORM EN 856:1997-02
Заменен
Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
ÖNORM EN 853:2007-10
Заменен
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification (consolidated version)
ÖNORM EN 343:2010-03
Заменен
Protective clothing - Protection against rain
ÖNORM EN 334:2009-06
Заменен
Gas pressure regulators for inlet pressures up to 100 bar
ÖNORM EN 857:1997-02
Заменен
Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
ÖNORM EN 15649-1:2014-09
Заменен
Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods
ÖNORM EN ISO 2398:2010-02
Заменен
Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2006)
ÖNORM EN ISO 3821:2010-05
Заменен
Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008)
ÖNORM EN ISO 3949:2014-12
Заменен
Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2009)
ÖVE/ÖNORM EN 50465:2020-10
Действует
Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW (english version)
ÖNORM EN ISO 8028:2018-05
Действует
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017)
ÖNORM EN ISO 8469:2021-07
Действует
Small craft - Non-fire-resistant fuel hoses (ISO 8469:2021)
ÖNORM EN ISO 7840:2021-05
Действует
Small craft - Fire-resistant fuel hoses (ISO 7840:2021)
ÖNORM EN 549:2019-10
Действует
Rubber materials for seals and diaphragms for gas appliances and gas equipment
ÖNORM EN 343:2019-05
Действует
Protective clothing - Protection against rain
ÖNORM EN 334:2019-11
Действует
Gas pressure regulators for inlet pressure up to 10 MPa (100 bar)
ÖNORM EN 12081:2017-11
Действует
Railway applications - Axleboxes - Lubricating greases
ÖNORM EN 13611:2019-07
Действует
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
ÖNORM EN 15807:2021-05
Действует
Railway applications - Pneumatic half couplings
ÖNORM EN 14225-3:2018-03
Действует
Diving suits - Part 3: Actively heated or cooled suit systems and components - Requirements and test methods
ÖNORM EN 13765:2018-08
Действует
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
ÖNORM EN ISO 2398:2017-03
Действует
Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016)
ÖNORM EN ISO 1825:2018-03
Действует
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017)
OVE EN 60068-2-74:2019-07
Действует
Environmental testing -- Part 2-74: Tests - Test Xc: Fluid contamination (IEC 60068-2-74:1999 + A1:2018) (english version)
SAE MS1004_200002
Заменен
Lubricants, Industrial Oils, and Related Products Type H (Hydraulic Fluids)--Specification
SAE MS1010_200208
Заменен
Lubricants, Industrial Oils, and Related Products Type T Turbine Oils - Specification
SAE MS1003_200212
Заменен
Lubricants, Industrial Oils, and Related Products Type D Compressor Oils--Specification
SAE MS1001_200205
Заменен
Lubricants, Industrial Oils, and Related Products Type a Lubricant for General Purpose and Total Loss Systems -- Specification
SAE J2558_200204
Заменен
Classification Systems for Thermoplastic Elastomers
SAE J2600_200210
Заменен
Compressed Hydrogen Surface Vehicle Refueling Connection Devices
SAE J2006_199509
Заменен
Marine Exhaust Hose
SAE USCAR23
Заменен
ROAD VEHICLES – 60 V AND 600 V SINGLE CORE (ISO/METRIC) CABLES – DIMENSIONS, TEST METHODS AND REQUIREMENTS