Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
Корзина
ON
О компании Стандарты Контакты Заказать стандарт
СтандартыON

ÖNORM EN 10027-1:2006-02

Заменен
Designation systems for steels - Part 1: Steel names
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

ÖNORM EN 10020:2000-06
Действует
Definition and classification of grades of steel
ÖNORM EN 10027-2:2015-06
Действует
Designation systems for steels - Part 2: Numerical system
ÖNORM EN 10027-1:2016-12
Действует
Designation systems for steels - Part 1: Steel names

На этот документ ссылаются

ÖNORM EN 10305-4:2003-10
Отменен
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
ÖNORM EN 10016-1:1995-06
Заменен
Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements
ÖNORM EN 10169-3:2003-11
Заменен
Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
ÖNORM EN 10169-1:2004-05
Заменен
Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
ÖNORM EN 4700-002:2011-05
Заменен
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section
ÖNORM EN 2032-001:2014-09
Заменен
Aerospace series - Metallic materials - Part 001: Conventional designation
ÖNORM EN 1559-2:2000-05
Заменен
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
ÖNORM EN 1559-1:1997-09
Заменен
Founding - Technical conditions of delivery - Part 1: General
ÖNORM EN 502:2000-02
Заменен
Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet
ÖNORM EN 10139:1998-01
Заменен
Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions
ÖNORM EN 10216-1:2004-07
Заменен
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (EN 10216-1:2002 + A1:2004)
ÖNORM EN 10216-5:2005-01
Заменен
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
ÖNORM EN 10152:2009-05
Заменен
Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
ÖNORM EN 10305-6:2005-08
Заменен
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
ÖNORM EN 10222-1:2003-09
Заменен
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings (EN 10222-1:1998 + A1:2002)
ÖNORM EN 10217-7:2005-06
Заменен
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
ÖNORM EN 10149-2:1996-02
Заменен
Hot-rolled flat products made of high yield strength steels for cold forming - Part 2: Delivery conditions for thermomechanically rolled steels
ÖNORM EN 10305-4:2011-04
Заменен
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
ÖNORM EN 10149-3:1996-02
Заменен
Hot-rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels
ÖNORM EN 10107:2005-12
Заменен
Grain-oriented electrical steel sheet and strip delivered in the fully processed state
ÖNORM EN 10149-1:1996-02
Заменен
Hot-rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions
ÖNORM EN 10088-2:2005-09
Заменен
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
ÖNORM EN 10088-3:2005-09
Заменен
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
ÖNORM EN 10268:2006-12
Заменен
Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
ÖNORM EN 10216-4:2004-07
Заменен
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties (EN 10216-4:2002 + A1:2004)
ÖNORM EN 10305-1:2010-04
Заменен
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
ÖNORM EN 10305-5:2010-04
Заменен
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
ÖNORM EN 10305-3:2010-04
Заменен
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
ÖNORM EN 10216-2:2007-12
Заменен
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
ÖNORM EN 10270-3:2001-10
Заменен
Steel wire for mechanical springs - Part 3: Stainless spring steel wire
ÖNORM EN 10208-1:2010-06
Заменен
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A
ÖNORM EN 10208-2:2010-06
Заменен
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
ÖNORM EN 10216-3:2004-07
Заменен
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (EN 10216-3:2002 + A1:2004)
ÖNORM EN 10209:1996-08
Заменен
Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
ÖNORM EN 10305-2:2010-04
Заменен
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
ÖNORM EN 10216-5:2014-12
Заменен
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
ÖNORM EN 10217-7:2014-12
Заменен
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
ÖNORM EN 13160-3:2003-11
Заменен
Leak detection systems - Part 3: Liquid systems for tanks
ÖNORM EN ISO 3452-3:1999-03
Заменен
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998)
ÖNORM EN 39:2001-06
Действует
Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions
ÖNORM EN 10271:1999-02
Действует
Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
ÖNORM EN 10085:2001-09
Заменен
Nitriding steels - Technical delivery conditions
ÖNORM EN 10025-6:2020-05
Действует
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
ÖNORM EN 10027-2:2015-06
Действует
Designation systems for steels - Part 2: Numerical system
ÖNORM EN 10130:2007-03
Действует
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
ÖNORM EN 10269:2014-03
Действует
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
ÖNORM EN 10296-1:2003-11
Действует
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
ÖNORM EN 10217-1:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
ÖNORM EN 10205:2017-01
Действует
Cold reduced tinmill products - Blackplate
ÖNORM EN 10225-1:2019-11
Действует
Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 1: Plates
ÖNORM EN 10305-1:2016-09
Действует
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
ÖNORM EN 10302:2008-08
Действует
Creep resisting steels, nickel and cobalt alloys
ÖNORM EN 10217-5:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
ÖNORM EN 10132-1:2000-05
Действует
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General
ÖNORM EN 10297-2:2008-02
Действует
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes (consolidated version)
ÖNORM EN 10267:1998-03
Действует
Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
ÖNORM EN 10255:2007-08
Действует
Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions
ÖNORM EN 10095:1999-06
Действует
Heat resisting steels and nickel alloys
ÖNORM EN 10217-2:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
ÖNORM EN 10120:2017-09
Действует
Steel sheet and strip for welded gas cylinders
ÖNORM EN 10283:2019-05
Действует
Corrosion resistant steel castings
ÖNORM EN 10111:2008-09
Действует
Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
ÖNORM EN 10090:1998-05
Действует
Valve steels and alloys for internal combustion engines
ÖNORM EN 10088-5:2009-11
Действует
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
ÖNORM EN 10217-4:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
ÖNORM EN 10225-2:2019-11
Действует
Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 2: Sections
ÖNORM EN 10253-2:2008-09
Действует
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
ÖNORM EN 10217-7:2021-06
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
ÖNORM EN 10305-5:2016-09
Действует
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
ÖNORM EN 10027-1:2016-12
Действует
Designation systems for steels - Part 1: Steel names
ÖNORM EN 10216-4:2014-02
Действует
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
ÖNORM EN 10346:2015-11
Действует
Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
ÖNORM EN 10248-1:1995-08
Действует
Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions
ÖNORM EN 10088-4:2009-11
Действует
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
ÖNORM EN 10263-1:2017-12
Действует
Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
ÖNORM EN 10107:2014-07
Действует
Grain-oriented electrical steel strip and sheet delivered in the fully processed state
ÖNORM EN 10137-3:1996-02
Действует
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions ...(abbreviated)
ÖNORM EN 10273:2016-11
Действует
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
ÖNORM EN 10152:2017-05
Действует
Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
ÖNORM EN 10343:2009-05
Действует
Steels for quenching and tempering for construction purposes - Technical delivery conditions
ÖNORM EN 10294-2:2012-05
Действует
Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties
ÖNORM EN 10217-3:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
ÖNORM EN 10219-1:2006-09
Действует
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
ÖNORM EN 10025-1:2005-02
Действует
Hot rolled products of structural steels - Part 1: General technical delivery conditions
ÖNORM EN 10217-6:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
ÖNORM EN 10139:2020-06
Действует
Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
ÖNORM EN 10222-1:2017-07
Действует
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
ÖNORM EN 10296-2:2008-02
Действует
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes (consolidated version)
ÖNORM EN 10088-3:2014-12
Действует
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
ÖNORM EN 10297-1:2003-09
Действует
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
ÖNORM EN 10338:2015-11
Действует
Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
ÖNORM EN 10268:2013-11
Действует
Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
ÖNORM EN 10088-2:2014-12
Действует
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
ÖNORM EN 10210-1:2006-09
Действует
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
ÖNORM EN 10209:2013-08
Действует
Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
ÖNORM EN 10025-5:2019-09
Действует
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
ÖNORM EN 10277:2018-10
Действует
Bright steel products - Technical delivery conditions
ÖNORM EN 10341:2006-10
Действует
Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state
ÖNORM EN 10272:2016-11
Действует
Stainless steel bars for pressure purposes
ÖNORM EN 10106:2016-01
Действует
Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state