Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыON

ÖNORM EN 14394:2009-02

Действует
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

ÖNORM EN 267:2011-10
Заменен
Automatic forced draught burners for liquid fuels
ÖNORM EN 287-1:2010-02
Отменен
Qualification test of welders - Fusion welding - Part 1: Steels
ÖNORM EN 288-9:1999-06
Действует
Specification and approval of welding procedures for metallic materials - Part 9: Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines
ÖNORM EN 303-1:2017-10
Действует
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
ÖNORM EN 303-2:1999-03
Заменен
Heating boilers - Part 2: Heating boilers with forced drought burners - Special requirements for boilers with atomizing oil burners
ÖNORM EN 304:2018-03
Действует
Heating boilers - Test code for heating boilers for atomizing oil burners
ÖNORM EN 1561:1997-09
Заменен
Founding - Grey cast irons
ÖNORM EN 1563:2007-12
Заменен
Founding - Spheroidal graphite cast irons (consolidated version)
ÖNORM EN 10025-1:2005-02
Действует
Hot rolled products of structural steels - Part 1: General technical delivery conditions
ÖNORM EN 10025-2:2005-02
Заменен
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
ÖNORM EN 10025-3:2019-09
Действует
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
ÖNORM EN 10088-1:2005-09
Заменен
Stainless steels - Part 1: List of stainless steels
ÖNORM EN 10088-2:2005-09
Заменен
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
BS EN 10204:2004
Действует
Metallic products. Types of inspection documents — 14 стр.
ÖNORM EN 10216-1:2004-07
Заменен
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (EN 10216-1:2002 + A1:2004)
ÖNORM EN 10216-2:2014-02
Заменен
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
ÖNORM EN 10216-3:2014-02
Действует
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
ÖNORM EN 10216-4:2004-07
Заменен
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties (EN 10216-4:2002 + A1:2004)
ÖNORM EN 10216-5:2005-01
Заменен
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
ÖNORM EN 10217-1:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
ÖNORM EN 10217-2:2007-09
Заменен
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties (consolidated version)
ÖNORM EN 10217-3:2007-09
Заменен
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (consolidated version)
ÖNORM EN 10217-4:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
ÖNORM EN 10217-5:2007-09
Заменен
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties (consolidated version)
ÖNORM EN 10217-6:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
ÖNORM EN 10217-7:2021-06
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
ÖNORM EN 10226-1:2004-09
Действует
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
ÖNORM EN 10226-3:2005-05
Действует
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
ÖNORM EN 12828:2003-09
Заменен
Heating systems in buildings - Design for water-based heating systems
ÖNORM EN 12953-8:2002-05
Действует
Shell boilers - Part 8: Requirements for safeguards against excessive pressure
ÖNORM EN 22553:1994-10
Заменен
Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
BS EN 60335-1:2012
Заменен
Household and similar electrical appliances. Safety. General requirements — 200 стр.
BS EN 60529:1992
Действует
Specification for degrees of protection provided by enclosures (IP code) — 42 стр.
BS EN 60730-2-9:2010
Действует
Automatic electrical controls for household and similar use. Particular requirements for temperature sensing controls — 62 стр.
ÖNORM EN ISO 228-1:2003-06
Действует
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
ÖNORM EN ISO 228-2:2003-06
Действует
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
ÖNORM EN ISO 4063:2009-11
Заменен
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009) (multilingual version: de/en/fr)
ÖNORM EN ISO 6506-1:2015-01
Действует
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ÖNORM EN ISO 9606-2:2005-04
Действует
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
ÖNORM EN ISO 15607:2004-03
Заменен
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
ÖNORM EN ISO 15609-1:2005-01
Заменен
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
ÖNORM EN ISO 15610:2004-02
Действует
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003)
ÖNORM EN ISO 15611:2004-03
Действует
Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)
ÖNORM EN ISO 15612:2018-10
Действует
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2018)
ÖNORM EN ISO 15613:2004-09
Действует
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
ÖNORM EN ISO 15614-1:2012-05
Заменен
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004 + Amd 1:2008 + Amd 2:2012) (consolidated version)
ÖNORM EN ISO 15614-2:2005-07
Действует
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
ISO 185:2005
Действует
Grey cast irons -- Classification — 28 стр.
ISO 857-1:1998
Заменен
Welding and allied processes - Vocabulary - Part 1: Metal welding processes — 92 стр.
ÖNORM EN 303-3:2006-10
Действует
Heating boilers - Part 3: Gas-fired central heating boilers - Assembly comprising a boiler body and a forced draught burner (consolidated version)
ISO 7005-1:2011
Действует
Pipe flanges -- Part 1: Steel flanges for industrial and general service piping systems — 18 стр.
ISO 7005-2:1988
Действует
Metallic flanges; part 2: cast iron flanges — 40 стр.
ISO 7005-3:1988
Действует
Metallic flanges; part 3: copper alloy and composite flanges — 32 стр.

На этот документ ссылаются

DIN EN 12953-2:2012-05
Действует
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories; German version EN 12953-2:2012 — 16 стр.
DIN EN 12953-1:2012-05
Действует
Shell boilers - Part 1: General; German version EN 12953-1:2012 — 31 стр.
DIN EN 12953-3:2016-12
Действует
Shell boilers - Part 3: Design and calculation for pressure parts; German version EN 12953-3:2016 — 118 стр.
ÖNORM EN 15456:2008-07
Действует
Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements