Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements; German version EN 13611:2015 + AC 2016— 160 стр.
Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications— 14 стр.
Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both— 12 стр.
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service— 5 стр.
Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa; German and English version prEN 88-1:2020
Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; German and English version prEN 88-2:2020
Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems; German and English version prEN 746-2:2020
District heating pipes - Factory made flexible pipe systems - Part 3: Non bonded system with plastic service pipes; requirements and test methods; German and English version prEN 15632-3:2020
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings; German version EN 16436-1:2014+A3:2020
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Pressure sensing devices for gas burners and gas burning appliances; German and English version prEN 1854:2020
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties; German version EN 10028-2:2017— 28 стр.
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties; German version EN 10028-4:2017— 14 стр.
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled; German version EN 10028-5:2017— 15 стр.
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered; German version EN 10028-6:2017— 16 стр.
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes; German version EN 10088-3:2014— 60 стр.
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions; German version EN 10130:2006, Corrigenda to DIN EN 10130:2007-02— 2 стр.
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2013— 29 стр.
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes; German and English version prEN 10216-5:2018
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004— 14 стр.
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005— 14 стр.
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment; German and English version prEN 14459:2020
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Combustion product sensing devices; German version EN 16340:2014— 54 стр.
Miniature fuses -- Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links (IEC 60127-1:2006 + A1:2011 + A2:2015) (english version)
Fixed capacitors for use in electronic equipment -- Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (IEC 60384-14:2013/A1:2016) (Amendment) (english version)
Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors (IEC 40/2530/CD:2017)
Low-voltage switchgear and controlgear -- Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:2016 + COR1:2016) (english version)
Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests— 22 стр.
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (IEC 61508-1:2010) (english version)
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (IEC 61508-2:2010) (english version)
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (IEC 61508-4:2010) (english version)
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (IEC 61508-6:2010) (english version)
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (IEC 61508-7:2010) (english version)
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers (IEC 61558-2-6:2009) (english version)
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units (IEC 61558-2-16:2009 + A1:2013) (english version)
Low-voltage surge protective devices -- Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods (IEC 61643-11:2011, modified) (english version)
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005 + A1:2012 + A2:2015) (english version)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013); German version EN ISO 898-1:2013— 66 стр.
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012); German version EN ISO 898-2:2012— 29 стр.
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020); German version EN ISO 3506-1:2020
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020); German version EN ISO 3506-2:2020
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009); German version EN ISO 3506-3:2009— 24 стр.
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO/DIS 13849-1:2020); German and English version prEN ISO 13849-1:2020
Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013); German version EN ISO 14732:2013— 24 стр.
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2019)
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003); German version EN ISO 15610:2003— 10 стр.
Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003); German version EN ISO 15611:2003— 8 стр.
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2018); German version EN ISO 15612:2018— 14 стр.
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004); German version EN ISO 15613:2004— 10 стр.
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO/DIS 15614-13:2020); German and English version prEN ISO 15614-13:2020
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005); German version EN ISO 15614-2:2005— 38 стр.
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO/DIS 23553-1:2020); German and English version prEN ISO 23553-1:2020
Road vehicles - Electrical disturbances by conduction and coupling - Part 2: Vehicles with nominal 12 V or 24 V- supply voltage; Electrical transient conduction along supply lines only (ISO/DIS 7637-2:2001)
Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Vehicles with nominal 12 V or 24 V supply voltage; Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines (ISO 7637-3:1995)— 10 стр.
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements; German version EN 13611:2015— 160 стр.
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function; German version EN 16830:2017— 24 стр.
Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use; German version EN 14543:2017— 46 стр.