Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыON

ÖNORM EN 10029:2011-01

Действует
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

ÖNORM EN 10079:2007-08
Действует
Definition of steel products
ÖNORM EN 10163-1:2008-02
Действует
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements (consolidated version)
ÖNORM EN 10163-2:2005-03
Действует
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats

На этот документ ссылаются

ÖNORM EN 1090-2:2009-07
Отменен
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
ÖNORM EN 15420:2011-11
Заменен
Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW
ÖNORM EN 483:2008-03
Заменен
Gas fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW (consolidated version)
DIN EN 1993-1-8:2005-07
Отменен
Eurocode 3: Design of steel structures - Part 1-8: Design of joints; German Version EN 1993-1-8;2005 — 148 стр.
DIN EN 1993-2:2010-12
Действует
Eurocode 3: Design of steel structures - Part 2: Steel Bridges (includes Corrigendum AC:2009) — 127 стр.
DIN EN 1993-2:2007-02
Отменен
Eurocode 3: Design of steel structures - Part 2: Steel Bridges; German version EN 1993-2:2006 — 124 стр.
ÖVE/ÖNORM EN 50465:2009-06
Заменен
Gas appliances - Fuel cell gas heating appliances - Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW (english version)
ÖVE/ÖNORM EN 50465:2015-07
Заменен
Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW (english version)
ÖNORM EN 1090-2:2018-09
Заменен
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
ÖNORM EN 1993-1-4:2015-12
Заменен
Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels (consolidated version)
ÖNORM EN 1993-1-4:2007-04
Заменен
Eurocode 3: Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
ÖNORM EN 1090-2:2012-01
Заменен
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
ÖNORM EN 297:2006-10
Заменен
Gas-fired central heating boilers - Type B boilers, fitted with atmospheric burners of nominal heat input not exceeding 70 kW (consolidated version)
ÖNORM EN 845-1:2013-09
Заменен
Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
ÖNORM EN 303-1:2004-03
Заменен
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking (EN 303-1:1999 + A1:2003)
ÖNORM EN 10028-1:2009-11
Заменен
Flat products made of steels for pressure purposes - Part 1: General requirements
ÖNORM EN 10149-2:1996-02
Заменен
Hot-rolled flat products made of high yield strength steels for cold forming - Part 2: Delivery conditions for thermomechanically rolled steels
ÖNORM EN 10149-3:1996-02
Заменен
Hot-rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels
ÖNORM EN 10149-1:1996-02
Заменен
Hot-rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions
ÖNORM EN 10025-6:2010-06
Действует
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
ÖNORM EN 10028-7:2008-03
Заменен
Flat products made of steels for pressure purposes - Part 7: Stainless steels
ÖNORM EN 10225:2010-06
Заменен
Weldable structural steels for fixed offshore structures - Technical delivery conditions
ÖNORM EN 10025-3:2005-02
Заменен
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
ÖNORM EN 10207:2005-07
Заменен
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
ÖNORM EN 10025-2:2005-02
Заменен
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
ÖNORM EN 10025-4:2005-02
Заменен
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
ÖNORM EN ISO 4126-2:2006-08
Заменен
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003) (consolidated version)
ÖNORM EN 16905-2:2020-03
Действует
Gas-fired endothermic engine driven heat pumps - Part 2: Safety
ÖNORM EN 303-5:2012-11
Заменен
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
ÖNORM EN 656:2007-03
Действует
Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW (consolidated version)
ÖNORM EN 845-1:2016-11
Действует
Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
ÖNORM EN 303-4:1999-04
Действует
Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking
ÖNORM EN 10025-6:2020-05
Действует
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
ÖNORM EN 10149-3:2013-11
Действует
Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels
ÖNORM EN 10163-2:2005-03
Действует
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
ÖNORM EN 10225-1:2019-11
Действует
Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 1: Plates
ÖNORM EN 10149-2:2013-11
Действует
Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels
ÖNORM EN 10304:2002-03
Действует
Magnetic materials (iron and steel) for use in relays
ÖNORM EN 10137-3:1996-02
Действует
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions ...(abbreviated)
ÖNORM EN 10149-1:2013-11
Действует
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
ÖNORM EN 10025-1:2005-02
Действует
Hot rolled products of structural steels - Part 1: General technical delivery conditions
ÖNORM EN 10025-5:2019-09
Действует
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
ÖNORM EN 10162:2003-12
Действует
Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
ÖNORM EN 10025-3:2019-09
Действует
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
ÖNORM EN 10025-4:2019-09
Действует
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
ÖNORM EN 10025-2:2019-09
Действует
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
ÖNORM EN 10079:2007-08
Действует
Definition of steel products
ÖNORM EN 14545:2009-01
Действует
Timber structures - Connectors - Requirements
ÖNORM EN 13836:2007-06
Действует
Gas fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1 000 kW
ÖNORM EN 1090-2:2020-07
Действует
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures (consolidated version)
ÖNORM EN 1993-1-4:2021-02
Действует
Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels (consolidated version)
ÖNORM EN ISO 20088-1:2017-01
Действует
Determination of the resistance to cryogenic spillage of insulation materials - Part 1: Liquid phases (ISO 20088-1:2016)