Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыON

ÖNORM EN 16125:2016-03

Заменен
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

ÖNORM EN 549:1995-02
Заменен
Rubber materials for seals and diaphragms for gas appliances and gas equipment
ÖNORM EN 1057:2010-04
Действует
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
ÖNORM EN 1092-1:2018-10
Действует
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
ÖNORM EN 1254-1:1998-04
Действует
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
ÖNORM EN 1254-2:1998-04
Действует
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
ÖNORM EN 1254-5:1998-04
Действует
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes
ÖNORM EN 1515-1:2000-04
Действует
Flanges and their joints - Bolting - Part 1: Selection of bolting
ÖNORM EN 10216-1:2014-02
Действует
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
ÖNORM EN 10216-2:2014-02
Заменен
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
ÖNORM EN 10216-3:2014-02
Действует
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
ÖNORM EN 10216-4:2014-02
Действует
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
ÖNORM EN 751-1:1997-03
Действует
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
ÖNORM EN 10216-5:2014-12
Заменен
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
ÖNORM EN 10217-1:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
ÖNORM EN 10217-1:2007-09
Заменен
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (consolidated version)
ÖNORM EN 10217-2:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
ÖNORM EN 10217-2:2007-09
Заменен
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties (consolidated version)
ÖNORM EN 10217-3:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
ÖNORM EN 10217-3:2007-09
Заменен
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (consolidated version)
ÖNORM EN 10217-4:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
ÖNORM EN 10217-4:2007-09
Заменен
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties (consolidated version)
ÖNORM EN 10217-6:2019-07
Действует
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
ÖNORM EN 751-2:1997-03
Действует
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
ÖNORM EN 10217-6:2007-09
Заменен
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties (consolidated version)
ÖNORM EN 10217-7:2014-12
Заменен
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
ÖNORM EN 10226-1:2004-09
Действует
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
ÖNORM EN 10226-2:2005-10
Действует
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
ÖNORM EN 10253-2:2008-09
Действует
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
ÖNORM EN 12007-1:2012-10
Действует
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements
ÖNORM EN 12007-3:2015-06
Действует
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
ÖNORM EN 12068:2000-05
Заменен
Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
ÖNORM EN 12266-1:2012-05
Действует
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
ÖNORM EN 12266-2:2012-03
Действует
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
ÖNORM EN 751-3:1997-03
Действует
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes
ÖNORM EN 12542:2010-09
Заменен
LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
ÖNORM EN 12799:2004-04
Действует
Brazing - Non-destructive examination of brazed joints (EN 12799:2000 + A1:2003)
ÖNORM EN 13175:2019-06
Заменен
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
ÖNORM EN 13175:2015-01
Заменен
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
ÖNORM EN 14291:2005-02
Действует
Foam producing solutions for leak detection on gas installations
ÖNORM EN 14324:2004-12
Действует
Brazing - Guidance on the application of brazed joints
ÖNORM EN 15001-1:2011-02
Действует
Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
ÖNORM EN ISO 3183:2018-11
Заменен
Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2012 + Amd 1:2017)
ÖNORM EN ISO 3452-1:2016-10
Действует
Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, corrected version 2014-05-01)
ÖNORM EN ISO 5817:2014-10
Действует
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
ÖNORM EN 751-3/AC:1997-09
Действует
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes (Corrigendum)
ÖNORM EN ISO 9454-2:2000-07
Заменен
Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:1998)
ÖNORM EN ISO 9606-1:2018-04
Действует
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
ÖNORM EN ISO 10380:2013-03
Действует
Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012)
ÖNORM EN ISO 10497:2010-05
Действует
Testing of valves - Fire type-testing requirements (ISO 10497:2010)
ÖNORM EN ISO 16810:2014-05
Действует
Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)
ÖNORM EN ISO 17636-1:2013-07
Действует
Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)
ÖNORM EN ISO 17637:2017-03
Действует
Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016)
ÖNORM EN ISO 17638:2017-02
Действует
Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016)
ÖNORM EN ISO 17640:2019-04
Действует
Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
ÖNORM EN 837-3:1997-07
Действует
Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
ÖNORM EN ISO 17672:2017-01
Действует
Brazing - Filler metals (ISO 17672:2016)
ÖNORM EN ISO 17292:2016-04
Действует
Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)
ASME B31.3_ES-2010
Действует
Tuberías de proceso (Spanish) (B31.3_ES - 2010) — 80 стр.
ASME B31.3-2016
Доступна более новая редакция
Process Piping — 562 стр.
ASME B31.3-2014
Доступна более новая редакция
Process Piping (B31.3 - 2014) — 536 стр.
ASME B31.3-2008
Доступна более новая редакция
Process Piping (B31.3 - 2008) — 384 стр.
ASME B31.3-2016
Доступна более новая редакция
Process Piping — 560 стр.
ASME B31.4-2016
Действует
B31.4 - 2016 Pipeline Transportation Systems for Liquids and Slurries — 136 стр.
ASME B31.4-2012
Доступна более новая редакция
Pipeline Transportation Systems for Liquids and Slurries — 140 стр.
ASME B16.5-2017
Действует
Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard — 256 стр.
ÖNORM EN 837-1:1997-07
Действует
Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
ASME B16.5-2013
Доступна более новая редакция
Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard — 236 стр.
ÖNORM EN 837-2:1997-10
Действует
Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
ÖNORM EN 1045:1997-08
Действует
Brazing - Fluxes for brazing - Classification and technical delivery conditions
ÖNORM EN 16125:2020-02
Действует
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase

На этот документ ссылаются

ÖNORM EN 16125:2020-02
Действует
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase