Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements; German version EN 13611:2015— 160 стр.
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (IEC 60384-14:2013) (english version)
Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors - Assessment levels E and EZ (IEC 60384-16-1:2005); German version EN 60384-16-1:2005— 14 стр.
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:2003 + A1:2009) (english version)
Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests— 22 стр.
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (IEC 61508-1:2010) (english version)
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (IEC 61508-2:2010) (english version)
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (IEC 61508-4:2010) (english version)
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (IEC 61508-6:2010) (english version)
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (IEC 61508-7:2010) (english version)
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers (IEC 61558-2-6:2009) (english version)
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units (IEC 61558-2-16:2009 + A1:2013) (english version)
Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods (IEC 61643-11:2011, modified) (english version)
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005 + A1:2012) (english version)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013); German version EN ISO 898-1:2013— 66 стр.
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012); German version EN ISO 898-2:2012— 29 стр.
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009); German version EN ISO 3506-3:2009— 24 стр.
Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007); German version EN ISO 8434-1:2007, Corrigendum to DIN EN ISO 8434-1:2008-02; German version EN ISO 8434-1:2007/AC:2009— 2 стр.
Non-destructive testing - Qualification and certification of NDT personnel; Supplement 1: Recomandations to the application of DIN EN ISO 9712:2012-12— 4 стр.
Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013); German version EN ISO 14732:2013— 24 стр.
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure specification (ISO/DIS 15612:2016); German and English version prEN ISO 15612:2016
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO/DIS 15614-1.2:2015); German and English version prEN ISO 15614-1:2015
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
Road vehicles - Electrical disturbances by conduction and coupling - Part 2: Vehicles with nominal 12 V or 24 V- supply voltage; Electrical transient conduction along supply lines only (ISO/DIS 7637-2:2001)
Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Vehicles with nominal 12 V or 24 V supply voltage; Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines (ISO 7637-3:1995)— 10 стр.
Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa; German version EN 88-1:2011+A1:2016— 53 стр.
Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa and associated safety devices; German version prEN 88-2:2014
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 2: Assemblies; German and English version prEN 16436-2:2016
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties; German version prEN 10028-2:2014
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties; German version prEN 10028-4:2014
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions; German version EN 10130:2006, Corrigenda to DIN EN 10130:2007-02— 2 стр.
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2013— 29 стр.
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes; German version EN 10216-5:2013, Corrigendum to DIN EN 10216-5:2014-03— 2 стр.
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004— 14 стр.
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service— 4 стр.
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005— 14 стр.
Open die steel forgings for general engineering purposes - Part 4: Stainless steels; German version EN 10250-4:1999, Corrigendum to DIN EN 10250-4:2000-02— 2 стр.
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-4:2016— 25 стр.
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form; German and English version FprEN 12020-2:2015
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Part 2: Fuel/air ratio control/supervision of the electronic type; German and English version prEN 12067-2:2015
Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections; German version EN 13555:2014— 38 стр.
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Combustion product sensing devices; German version EN 16340:2014— 54 стр.
Miniature fuses -- Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links (IEC 60127-1:2006 + A1:2011 + A2:2015) (english version)
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements; German version EN 13611:2015 + AC 2016— 160 стр.
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements; German version EN 13611:2015 + AC 2016— 160 стр.
