Uncertainty of measurement -- Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) -- Supplement 1: Propagation of distributions using a Monte Carlo method— 98 стр.
Uncertainty of measurement -- Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) -- Supplement 1: Propagation of distributions using a Monte Carlo method -- Technical Corrigendum 1— 2 стр.
Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters— 64 стр.
Uncertainty of measurement -- Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) -- Supplement 1: Propagation of distributions using a Monte Carlo method -- Technical Corrigendum 1— 2 стр.
LED-binning - Part 1: General requirements and white colour grid intended for automotive applications (IEC 62707-1:2013 + A1:2018); German version EN 62707-1:2014 + A1:2018— 35 стр.
Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2018); German version EN ISO 17201-1:2018— 50 стр.
Protective clothing - Protection against chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO 19918:2017); German version EN ISO 19918:2017— 24 стр.
Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation calculations (ISO 17201-3:2010); German version EN ISO 17201-3:2010— 62 стр.
Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application (ISO 11929:2010)— 82 стр.
Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2018); German and English version EN ISO 14064-1:2018— 109 стр.
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018); German version EN ISO 14978:2018— 55 стр.
Water quality - Measurement of gross alpha and gross beta activity in non-saline water - Thin source deposit method (ISO 10704:2009); German version EN ISO 10704:2015— 21 стр.
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions— 15 стр.
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions; German version EN 1793-6:2018— 50 стр.
Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents; German version EN 482:2012+A1:2015— 25 стр.
Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2019); German version EN ISO 3740:2019— 51 стр.
Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2016); German version EN ISO 1:2016— 11 стр.
Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing; German version EN 16002:2018— 20 стр.
Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry; German version EN 14726:2019— 31 стр.
Determination of material resistance to permeation by chemicals - Part 2: Permeation by gaseous chemical under conditions of continuous contact; German version EN 16523-2:2015— 13 стр.
Determination of material resistance to permeation by chemicals - Part 2: Permeation by potentially hazardous gaseous chemicals under conditions of continuous contact; German version EN 16523-2:2015+A1:2018— 14 стр.
Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009); German version EN ISO 6145-7:2010— 22 стр.
Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz) (english version)
Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments (IEC 61786-1:2013) (english version)
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components (IEC 62489-1:2010) (english version)
Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts (IEC 60318-4:2010) (english version)
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration (CISPR 16-1-6:2014) (english version)
Electroacoustics - Measurement microphones -- Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique (IEC 61094-2:2009) (english version)
Measurement microphones -- Part 8: Methods for determining the freefield sensitivity of working standard microphones by comparison (IEC 61094-8:2012) (english version)
Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials (IEC 60404-15:2012) (english version)
Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses (IEC 60645-7:2009) (english version)
Electroacoustics - Simulators of human head and ear -- Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry (IEC 60318-3:2014) (english version)
Wind turbines - Part 12-2: Power performance of electricity-producing wind turbines based on nacelle anemometry (IEC 61400-12-2:2013) (english version)
Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents (IEC 61083-2:2013) (english version)
Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz (IEC 62127-1:2007 + Cor.:2008 + A1:2013) (english version)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty (CISPR 16-4-2:2011 + A1:2014) (english version)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty (CISPR 16-4-2:2011) (english version)
Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones (IEC 60318-1:2009) (english version)
Stationary source emissions - Determination of mass concentration of fluorinated compounds expressed as HF - Standard reference method (CEN/TS 17340:2020)
Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 7: Extrinsic characteristics - In situ values of insertion loss (CEN/TS 16272-7:2015)
Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions (CEN/TS 16272-5:2014)
Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009)
Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 2: Advanced applications (ISO 11929-2:2019)
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008)
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 1: Elementary applications (ISO 11929-1:2019)
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014 + Amd 1:2018) (consolidated version)
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008)
Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 2: Advanced applications (ISO 11929-2:2019)
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 1: Elementary applications (ISO 11929-1:2019)
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3: Applications to unfolding methods (ISO 11929-3:2019)
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3: Applications to unfolding methods (ISO 11929-3:2019)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
