Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыON

ÖNORM EN ISO 1461:2009-08

Действует
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

ÖNORM EN 1179:2003-10
Действует
Zinc an zinc alloys - Primary zinc
ÖNORM EN 13283:2003-03
Действует
Zinc and zinc alloys - Secondary zinc
ISO 752:2004
Действует
Zinc ingots — 10 стр.
ISO 1460:1992
Действует
Metallic coatings; hot dip galvanized coatings on ferrous materials; gravimetric determination of the mass per unit area — 5 стр.
ISO 2064:1996
Действует
Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness — 8 стр.
ISO 2178:1982
Заменен
Non-magnetic coatings on magnetic substrates; Measurement of coating thickness; Magnetic method — 6 стр.
ISO 2808:2007
Действует
Paints and varnishes -- Determination of film thickness — 46 стр.
ISO 2859-1:1999/Amd.1:2011
Действует
Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection -- Amendment 1 — 8 стр.
ISO 2859-2:1985
Действует
Sampling procedures for inspection by attributes; Part 2 : Sampling plans indexed by limiting quality (LQ) for isolated lot inspection — 26 стр.
ISO 2859-3:2005
Действует
Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures — 34 стр.
ISO 3549:1995
Действует
Zinc dust pigments for paints - Specifications and test methods — 16 стр.
ISO 3882:2003
Действует
Metallic and other inorganic coatings -- Review of methods of measurement of thickness — 16 стр.
ISO 10474:2013
Действует
Steel and steel products -- Inspection documents — 10 стр.

На этот документ ссылаются

ÖNORM EN 1317-5:2008-11
Заменен
Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
ÖNORM EN 14592:2009-02
Заменен
Timber structures - Dowel-type fasteners - Requirements
ÖNORM EN 1317-5:2012-05
Заменен
Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
ÖNORM EN 840-5:2004-06
Заменен
Mobile waste containers - Part 5: Performance requirements and test methods
ÖNORM EN 10223-7:2003-03
Заменен
Steel wire and wire products for fences - Part 7: Steel wire welded panels - For fencing
ÖNORM EN 10223-4:1998-06
Заменен
Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing
ÖVE/ÖNORM EN 62561-2:2013-03
Заменен
Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes (IEC 62561-2:2012, modified) (english version)
ÖNORM EN 1317-5:2012-07
Заменен
Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
ÖNORM EN 1090-2:2018-09
Заменен
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
ÖNORM EN 1995-1-1:2015-06
Заменен
Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (consolidated version)
ÖNORM EN 1473:2007-09
Заменен
Installation and equipment for liquefied natural gas - Design of onshore installations
ÖNORM EN 1995-1-1:2014-11
Заменен
Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (consolidated version)
ÖNORM EN 1090-4:2018-09
Заменен
Execution of steel structures and aluminium structures - Part 4: Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications
ÖNORM EN 1474-1:2009-02
Заменен
Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
ÖNORM EN 1765:2005-01
Заменен
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
ÖNORM EN 845-2:2003-07
Заменен
Specification for ancillary components for masonry - Part 2: Lintels
ÖNORM EN 840-5:2013-02
Заменен
Mobile waste and recycling containers - Part 5: Performance requirements and test methods
ÖNORM EN 845-1:2008-07
Заменен
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
ÖNORM EN 845-1:2013-09
Заменен
Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
ÖNORM EN 845-2:2013-07
Заменен
Specification for ancillary components for masonry - Part 2: Lintels
ÖNORM EN 12574-2:2006-04
Заменен
Stationary waste containers - Part 2: Performance requirements and test methods
ÖNORM EN 13071-2:2010-05
Заменен
Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems (consolidated version)
ÖNORM EN 13438:2007-12
Заменен
Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes
ÖNORM EN 13071-1:2010-06
Заменен
Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements (consolidated version)
ÖNORM EN 13071-2:2013-12
Заменен
Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
ÖNORM EN 13914-1:2005-06
Заменен
Design, preparation and application of external rendering and internal plastering - Part 1: External rendering
ÖNORM EN 15773:2010-10
Заменен
Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines
ÖVE/ÖNORM EN 50397-2:2010-07
Действует
Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 2: Accessories for covered conductors - Tests and acceptance criteria (english version)
ONR CEN/TS 16811-3:2016-06
Действует
Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods
ÖNORM EN 16582-1:2015-12
Заменен
Domestic swimming pools - Part 1: General requirements including safety and test methods
ÖNORM EN 16582-1:2021-07
Действует
Domestic swimming pools - Part 1: General requirements including safety and test methods
ÖNORM EN 845-2:2017-01
Действует
Specification for ancillary components for masonry - Part 2: Lintels
ÖNORM EN 711:2016-07
Действует
Inland navigation vessels - Railings for decks and side decks - Requirements, designs and types
ÖNORM EN 517:2006-04
Действует
Prefabricated accessories for roofing - Roof safety hooks
ÖNORM EN 39:2001-06
Действует
Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions
ÖNORM EN 124-4:2015-09
Действует
Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
ÖNORM EN 845-1:2016-11
Действует
Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
ÖNORM EN 124-3:2015-09
Действует
Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
ÖNORM EN 40-5:2002-08
Действует
Lighting columns - Part 5: Requirements for steel lighting columns
ÖNORM EN 516:2006-03
Действует
Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps
ÖNORM EN 840-5:2020-08
Действует
Mobile waste and recycling containers - Part 5: Performance requirements and test methods
ÖNORM EN 12899-1:2008-01
Действует
Fixed, vertical road traffic signs - Part 1: Fixed signs
ÖNORM EN 10223-4:2013-03
Действует
Steel wire and wire products for fencing and netting - Part 4: Steel wire welded mesh fencing
ÖNORM EN 10348-2:2019-02
Действует
Steel for the reinforcement of concrete - Galvanized reinforcing steel - Part 2: Galvanized reinforcing steel products
ÖNORM EN 12899-2:2008-01
Действует
Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
ÖNORM EN 10255:2007-08
Действует
Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions
ÖNORM EN 10223-8:2014-02
Действует
Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
ÖNORM EN 10223-7:2013-03
Действует
Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing
ÖNORM EN 12574-2:2017-03
Действует
Stationary waste containers - Part 2: Performance requirements and test methods
ÖNORM EN 10240:1998-03
Действует
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
ÖNORM EN 10223-2:2013-03
Действует
Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes
ÖNORM EN 12811-2:2004-06
Действует
Temporary works equipment - Part 2: Information on materials
ÖNORM EN 14396:2004-03
Действует
Fixed ladders for manholes
ÖNORM EN 14545:2009-01
Действует
Timber structures - Connectors - Requirements
ÖNORM EN 15773:2018-02
Действует
Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines
ÖNORM EN 13914-1:2016-09
Действует
Design, preparation and application of external rendering and internal plastering - Part 1: External rendering
ÖNORM EN 13071-1:2019-10
Действует
Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements
ÖNORM EN 14475:2007-01
Действует
Execution of special geotechnical works - Reinforced fill (consolidated version)
ÖNORM EN 13438:2013-10
Действует
Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
ÖNORM EN 13071-2:2019-10
Действует
Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
ÖNORM EN 14490:2010-07
Действует
Execution of special geotechnical works - Soil nailing
ÖNORM EN 14592:2012-07
Действует
Timber structures - Dowel-type fasteners - Requirements
ÖNORM EN 13101:2005-01
Действует
Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity
ÖNORM EN 1993-3-1:2010-08
Действует
Eurocode 3 - Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts (consolidated version)
ÖNORM EN 1462:2005-01
Действует
Brackets for eaves gutters - Requirements and testing
ÖNORM EN 1317-5:2013-06
Действует
Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems (consolidated version)
ÖNORM EN 1090-2:2020-07
Действует
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures (consolidated version)
ÖNORM EN 1993-1-1:2014-10
Действует
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings (consolidated version)
ÖNORM EN 1123-1:2005-05
Действует
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control (consolidated version)
ÖNORM EN 1123-3:2005-02
Действует
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in shipbuilding
ÖNORM EN 1090-4:2020-06
Действует
Execution of steel structures and aluminium structures - Part 4: Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications
ÖNORM EN 1473:2016-09
Действует
Installation and equipment for liquefied natural gas - Design of onshore installations
ÖNORM EN 1765:2016-12
Действует
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
ÖNORM EN 1995-1-1:2019-06
Действует
Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (consolidated version)
ÖNORM EN 1993-6:2010-08
Действует
Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures (consolidated version)