Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997)
Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings (IEC 61757-1-1:2016); German version EN 61757-1-1:2017— 54 стр.
Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014); German and English version FprEN ISO 17296-3:2016— 20 стр.
Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014); German version EN ISO 17296-3:2016— 20 стр.
Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2015); English version EN ISO 24817:2015— 103 стр.
Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2017); English version EN ISO 24817:2017— 105 стр.
Standard terminology for additive manufacturing - Coordinate systems and test methodologies (ISO/ASTM 52921:2013); German version EN ISO/ASTM 52921:2016— 22 стр.
Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014); English version EN ISO 12736:2014— 90 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2001); German version EN ISO 10350-2:2001— 16 стр.
Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods; German version EN 1013:2012— 60 стр.
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP); German version EN 1796:2006+A1:2008— 69 стр.
Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods; German version EN 1013:2012+A1:2014— 64 стр.
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP); German version EN 1796:2013— 66 стр.
Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets; German version EN 845-1:2013+A1:2016— 62 стр.
Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006); English version CEN ISO/TS 24817:2011— 83 стр.
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints; German version EN 14364:2013— 68 стр.
Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures; German version EN 16129:2013— 147 стр.
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints; German version EN 14364:2006+A1:2008— 72 стр.
Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids; German version EN 16993:2018— 66 стр.
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers; German version EN 16245-2:2013— 22 стр.
Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures; German version EN 13786:2004+A1:2008— 139 стр.
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures; German version EN 13491:2013— 44 стр.
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures; German version EN 13785:2005+A1:2008— 142 стр.
Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures; German version EN 13491:2018— 68 стр.
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment; German version EN 13492:2018— 67 стр.
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites; German version EN 13493:2013— 44 стр.
Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures; German version EN 12864:2001 + A1:2003 + A2:2005— 130 стр.
Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method; German version EN 13587:2010— 10 стр.
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment; German version EN 13492:2013— 42 стр.
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment— 38 стр.
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites; German version EN 13493:2018— 67 стр.
Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables (english version)
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor.1:2007) (consolidated version)
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)
Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000)
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:2003)
Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures
Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements (consolidated version)
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermo-setting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995)
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995)
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003)
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) (consolidated version)
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
