Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыON

ÖNORM EN 10025-2:2005-02

Заменен
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

ÖNORM EN 10059:2004-04
Действует
Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
ÖNORM EN 1011-2:2004-05
Действует
Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels (EN 1011-2:2001 + A1:2003)
ÖNORM EN 10017:2005-01
Действует
Steel rod for drawing and/or cold rolling - Dimensions and tolerances
ÖNORM EN 10024:1995-06
Действует
Hot rolled taper flange I sections - Tolerances on shape and dimensions
ÖNORM EN 10029:2011-01
Действует
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
ÖNORM EN 10034:1994-03
Действует
Structural steel I and H sections - Tolerances on shape and dimensions
ÖNORM EN 10048:1996-11
Действует
Hot rolled narrow steel strip - Tolerances on dimensions and shape
ÖNORM EN 10051:2011-01
Действует
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
ÖNORM EN 10055:1996-01
Действует
Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
ÖNORM EN 10056-1:2017-03
Действует
Structural steel equal and unequal leg angles - Part 1: Dimensions
ÖNORM EN 10020:2000-06
Действует
Definition and classification of grades of steel
ÖNORM EN 10056-2:1993-12
Действует
Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
ÖNORM EN 10058:2019-02
Действует
Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
ÖNORM EN 10060:2004-04
Действует
Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
ÖNORM EN 10061:2004-04
Действует
Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
ÖNORM EN 10067:1997-01
Действует
Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass
ÖNORM EN 10162:2003-12
Действует
Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
ÖNORM EN 10279:2000-05
Действует
Hot rolled steel channels - Tolerances on shape, dimensions and mass
ÖNORM EN 10160:1999-10
Действует
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
ÖNORM EN 10306:2002-08
Действует
Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams
ÖNORM EN 10308:2002-04
Действует
Non destructive testing - Ultrasonic testing of steel bars
ÖNORM EN ISO 643:2013-06
Заменен
Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
ÖNORM EN 10027-1:2016-12
Действует
Designation systems for steels - Part 1: Steel names
ÖNORM EN 10027-2:2015-06
Действует
Designation systems for steels - Part 2: Numerical system
ÖNORM EN 10163-1:2008-02
Действует
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements (consolidated version)
ÖNORM EN 10163-2:2005-03
Действует
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
ÖNORM EN 10163-3:2005-03
Действует
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections
ÖNORM EN 10164:2018-11
Действует
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
ÖNORM EN 10025-2:2019-09
Действует
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels

На этот документ ссылаются

ÖVE/ÖNORM EN 61029-2-10:2010-11
Заменен
Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders (IEC 61029-2-10:1998, modified) (english version)
ÖVE/ÖNORM EN 50119:2010-07
Заменен
Railway applications - Fixed installations - Electric traction overhead contact lines (english version)
ONR CEN/TS 16811-3:2016-06
Действует
Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods
ÖNORM EN ISO 10855-1:2018-11
Действует
Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018)
ÖNORM EN ISO 16946:2017-07
Действует
Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017)
ÖNORM EN ISO 16946:2015-07
Заменен
Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2015)
ÖNORM EN ISO 7236:2016-11
Действует
Ships and marine technology - Inland navigation vessels - Mounting attachments for demountable signal masts for push-tows (ISO 7236:2014)
ÖNORM EN 16506:2014-12
Действует
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
ÖNORM EN 16207:2014-10
Заменен
Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
ÖNORM EN 16116-2:2013-11
Заменен
Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons
ÖNORM EN 16207:2020-02
Действует
Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
ÖNORM EN 12493:2018-12
Заменен
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
ÖNORM EN 12493:2021-02
Действует
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
ÖNORM EN 10365:2017-03
Действует
Hot rolled steel channels, I and H sections - Dimensions and masses
ÖNORM EN 10162:2003-12
Действует
Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
ÖNORM EN 12493:2014-09
Заменен
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
ÖNORM EN 10025-2:2019-09
Действует
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
ÖNORM EN 10169:2011-02
Заменен
Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
ÖNORM EN 10277-2:2008-08
Заменен
Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
ÖNORM EN 12952-5:2011-12
Заменен
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
ÖNORM EN 12480:2015-04
Заменен
Gas meters - Rotary displacement gas meters
ÖNORM EN 10277:2018-10
Действует
Bright steel products - Technical delivery conditions
ÖNORM EN 12285-2:2005-04
Действует
Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
ÖNORM EN 12952-5:2002-04
Заменен
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
ÖNORM EN 12320:2001-04
Заменен
Building hardware - Padlocks and padlock fittings - Requirements and test methods
ÖNORM EN 12952-5:2022-02
Действует
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
ÖNORM EN 12493:2013-12
Заменен
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
ÖNORM EN 12285-1:2003-07
Заменен
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
ÖNORM EN 10238:2009-11
Действует
Automatically blast-cleaned and automatically prefabrication primed structural steel products
ÖNORM EN 10169:2012-05
Действует
Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
ÖNORM EN 10056-1:2017-03
Действует
Structural steel equal and unequal leg angles - Part 1: Dimensions
ÖNORM EN 12320:2012-12
Действует
Building hardware - Padlocks and padlock fittings - Requirements and test methods
ÖNORM EN 12079-1:2006-10
Заменен
Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking
ÖNORM EN 12493:2015-10
Заменен
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture (consolidated version)
ÖNORM EN 12542:2010-09
Заменен
LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
ÖNORM EN 12952-3:2002-05
Заменен
Water-tube boilers and auxilliary installations - Part 3: Design and calculation for pressure parts
ÖNORM EN 14420-2:2013-09
Действует
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
ÖNORM EN 14420-5:2005-02
Заменен
Hose fittings with clamp units - Part 5: Threaded connections
ÖNORM EN 15551:2011-02
Заменен
Railway applications - Railway rolling stock - Buffers
ÖNORM EN 15085-3:2008-01
Действует
Railway applications - Welding of railway vehicles and components - Part 3: Design requirements
ÖNORM EN 14592:2012-07
Действует
Timber structures - Dowel-type fasteners - Requirements
ÖNORM EN 13218:2009-02
Заменен
Machine tools - Safety - Stationary grinding machines (consolidated version)
ÖNORM EN 13223:2005-01
Заменен
Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment
ÖNORM EN 14420-4:2007-06
Заменен
Hose fittings with clamp units - Part 4: Flange connections
ÖNORM EN 15085-3+AC:2012-11
Действует
Railway applications - Welding of railway vehicles and components - Part 3: Design requirements (consolidated version)
ÖNORM EN 14423:2015-01
Заменен
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
ÖNORM EN 13814:2005-07
Заменен
Fairground and amusement park machinery and structures - Safety
ÖNORM EN 13796-1:2007-08
Заменен
Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, two-hangers
ÖNORM EN 15317:2007-06
Заменен
Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
ÖNORM EN 14423:2005-01
Заменен
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
ÖNORM EN 14423:2019-11
Действует
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
ÖNORM EN 14199:2012-06
Заменен
Execution of special geotechnical works - Micropiles
ÖNORM EN 14490:2010-07
Действует
Execution of special geotechnical works - Soil nailing
ÖNORM EN 15646:2009-06
Действует
Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods
ÖNORM EN 14972-14:2021-11
Действует
Fixed firefighting systems - Water mist systems - Part 14: Test protocol for combustion turbines in enclosures exceeding 260 m³ for open nozzle systems
ÖNORM EN 14545:2009-01
Действует
Timber structures - Connectors - Requirements
ÖNORM EN 14157:2005-01
Заменен
Natural stones - Determination of abrasion resistance
ÖNORM EN 15317:2014-01
Действует
Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
ÖNORM EN 15551:2017-03
Действует
Railway applications - Railway rolling stock - Buffers
ÖNORM EN 14422/AC:2006-09
Заменен
Clamp type coupling assemblies for LPG transfer hoses (Corrigendum of English version)
ÖNORM EN 14423:2016-11
Заменен
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
ÖNORM EN 13084-7:2013-02
Действует
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
ÖNORM EN 15551:2009-10
Отменен
Railway applications - Railway rolling stock - Buffers
ÖNORM EN 14199:2005-05
Заменен
Execution of special geotechnical works - Micropiles
ÖNORM EN 14420-4:2013-09
Действует
Hose fittings with clamp units - Part 4: Flange connections
ÖNORM EN 14422:2005-01
Заменен
Clamp type coupling assemblies for LPG transfer hoses
ÖNORM EN 13000:2019-05
Действует
Cranes - Mobile cranes
ÖNORM EN 13121-3:2016-08
Действует
GRP tanks and vessels for use above ground - Part 3: Design and workmanship
ÖNORM EN 14422+AC:2006-09
Заменен
Clamp type coupling assemblies for LPG transfer hoses (consolidated version)
ÖNORM EN 14199:2016-03
Заменен
Execution of special geotechnical works - Micropiles
ÖNORM EN 14475:2007-01
Действует
Execution of special geotechnical works - Reinforced fill (consolidated version)
ÖNORM EN 14423/AC:2006-09
Действует
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar (Corrigendum of English version)
ÖNORM EN 13852-1:2007-09
Заменен
Cranes - Offshore cranes - Part 1: General purpose offshore cranes (consolidated version)
ÖNORM EN 14422:2013-08
Действует
Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
ÖNORM EN 14394:2009-02
Действует
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
ÖNORM EN 14423+AC:2006-09
Действует
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar (consolidated version)
ÖNORM EN 14420-2:2005-02
Заменен
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
ÖNORM EN 14592:2009-02
Заменен
Timber structures - Dowel-type fasteners - Requirements
ÖNORM EN 13000:2010-11
Заменен
Cranes - Mobile cranes (consolidated version)
ÖNORM EN 13000:2016-01
Заменен
Cranes - Mobile cranes
ÖNORM EN 14420-5:2013-09
Действует
Hose fittings with clamp units - Part 5: Threaded connections
ÖNORM EN 14972-15:2021-11
Действует
Fixed firefighting systems - Water mist systems - Part 15: Test protocol for combustion turbines in enclosures not exceeding 260 m³ for open nozzle systems
ÖNORM EN 14424:2013-08
Действует
Hose fittings with screwed ferrules
ÖNORM EN 15080-8:2009-12
Действует
Extended application of results from fire resistance tests - Part 8: Beams
ÖNORM EN ISO 2400:2013-04
Действует
Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
ÖNORM ENV 13381-2:2002-11
Заменен
Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes
ÖNORM ENV 13381-4:2002-12
Заменен
Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied protection to steel members
ÖNORM EN 1503-1:2001-02
Действует
Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
ÖNORM EN 1536:2010-11
Заменен
Execution of special geotechnical work - Bored piles
ÖNORM EN 1337-3:2005-07
Действует
Structural bearings - Part 3: Elastomeric bearings
ÖNORM EN 1065:1998-12
Заменен
Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests
ÖNORM EN 1520:2011-08
Действует
Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
ÖNORM EN 1090-2:2009-07
Отменен
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
ÖNORM EN 1090-2:2020-07
Действует
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures (consolidated version)
ÖNORM EN 1520:2011-05
Отменен
Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
ÖNORM EN 1966:2009-06
Действует
Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
ÖNORM EN 1993-4-1:2010-06
Заменен
Eurocode 3 - Design of steel structures - Part 4-1: Silos (consolidated version)
ÖNORM EN 1994-1-2:2014-07
Действует
Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design (consolidated version)
ÖNORM EN 1536:2015-12
Действует
Execution of special geotechnical work - Bored piles
ÖNORM EN 1993-4-2:2010-06
Заменен
Eurocode 3 - Design of steel structures - Part 4-2: Tanks (consolidated version)