Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыON

ÖNORM EN 197-1:2011-10

Действует
Cement - Part 1: Composition, specifications and conformity criteria for common cements
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

ÖNORM EN 196-1:2016-10
Действует
Methods of testing cement - Part 1: Determination of strength
ÖNORM EN 196-2:2005-04
Заменен
Methods of testing cement - Part 2: Chemical analysis of cement
ÖNORM EN 196-3:2009-02
Заменен
Methods of testing cement - Part 3: Determination of setting times and soundness
ÖNORM EN 196-5:2005-04
Заменен
Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement
ÖNORM EN 196-6:2019-02
Действует
Methods of testing cement - Part 6: Determination of fineness
ÖNORM EN 196-7:2008-02
Действует
Methods of testing cement - Part 7: Methods of taking and preparing samples of cement
ÖNORM EN 196-8:2010-06
Действует
Methods of testing cement - Part 8: Heat of hydration - Solution method
ÖNORM EN 196-9:2010-05
Действует
Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method
ÖNORM EN 197-2:2000-12
Заменен
Cement - Part 2: Conformity evaluation
ÖNORM EN 451-1:2009-02
Заменен
Method of testing fly ash - Part 1: Determination of free calcium oxide content
ÖNORM EN 933-9:2009-08
Заменен
Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test
ÖNORM EN 13639:2005-01
Заменен
Determination of total organic carbon in limestone (consolidated version)
ISO 9277:2010
Действует
Determination of the specific surface area of solids by gas adsorption -- BET method — 30 стр.
ISO 9286:1997
Действует
Abrasive grains and crude - Chemical analysis of silicon carbide — 25 стр.
ÖNORM EN 197-1:2008-10
Заменен
Cement - Part 1: Composition, specifications and conformity criteria for common cements (consolidated version)
ÖNORM EN 197-4:2004-08
Заменен
Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements

На этот документ ссылаются

DIN EN 545:2011-09
Действует
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; German version EN 545:2010 — 94 стр.
DIN EN 480-13:2010-01
Отменен
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures; German version EN 480-13:2009 — 9 стр.
DIN EN 545:2010-12
Отменен
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; German version EN 545:2010 — 94 стр.
DIN EN 480-1:2007-01
Отменен
Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing; German version EN 480-1:2006 — 12 стр.
ÖNORM EN 16622:2016-01
Действует
Silica-calcium fume for concrete - Definitions, requirements and conformity criteria
ÖNORM EN 16907-4:2019-03
Действует
Earthworks - Part 4: Soil treatment with lime and/or hydraulic binders
ÖNORM EN 12716:2019-06
Действует
Execution of special geotechnical work - Jet grouting
ÖNORM EN 12390-3:2012-04
Заменен
Testing hardened concrete - Part 3: Compressive strength of test specimens (consolidated version)
ÖNORM EN 12715:2021-04
Действует
Execution of special geotechnical work - Grouting
ÖNORM EN 12848:2009-05
Действует
Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions
ÖNORM EN 12878:2006-06
Заменен
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test (consolidated version)
ÖNORM EN 12467:2018-08
Действует
Fibre-cement flat sheets - Product specification and test methods
ÖNORM EN 12467:2006-12
Заменен
Fibre cement flat sheets - Product specification and test methods (consolidated version)
ÖNORM EN 12390-3:2009-05
Заменен
Testing hardened concrete - Part 3: Compressive strength of test specimens
ÖNORM EN 10298:2006-01
Действует
Steel tubes and fittings for on shore and offshore pipelines - Internal lining with cement mortar
ÖNORM EN 12390-3:2019-11
Действует
Testing hardened concrete - Part 3: Compressive strength of test specimens
ÖNORM EN 12467:2012-11
Заменен
Fibre-cement flat sheets - Product specification and test methods
ÖNORM EN 12878:2014-05
Действует
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
ÖNORM EN 13748-1:2005-08
Действует
Terrazzo tiles - Part 1: Terrazzo tiles for internal use (consolidated version)
ÖNORM EN 13748-2:2005-03
Действует
Terrazzo tiles - Part 2: Terrazzo tiles for external use
ÖNORM EN 14891:2009-12
Заменен
Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation (consolidated version)
ÖNORM EN 13101:2005-01
Действует
Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity
ÖNORM EN 14227-14:2006-08
Заменен
Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash
ÖNORM EN 14199:2012-06
Заменен
Execution of special geotechnical works - Micropiles
ÖNORM EN 14490:2010-07
Действует
Execution of special geotechnical works - Soil nailing
ÖNORM EN 13282-2:2015-06
Действует
Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
ÖNORM EN 14216:2015-08
Действует
Cement - Composition, specifications and conformity criteria for very low heat special cements
ÖNORM EN 14227-4:2013-08
Действует
Hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures
ÖNORM EN 14227-4:2004-10
Заменен
Hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures
ÖNORM EN 13263-1:2009-06
Действует
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
ÖNORM EN 15743:2015-06
Действует
Supersulfated cement - Composition, specifications and conformity criteria
ÖNORM EN 14199:2005-05
Заменен
Execution of special geotechnical works - Micropiles
ÖNORM EN 13914-1:2005-06
Заменен
Design, preparation and application of external rendering and internal plastering - Part 1: External rendering
ÖNORM EN 14891:2017-03
Действует
Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking
ÖNORM EN 14891:2013-09
Заменен
Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation
ÖNORM EN 14227-15:2016-02
Действует
Hydraulically bound mixtures - Specifications - Part 15: Hydraulically stabilized soils
ÖNORM EN 13364:2002-03
Действует
Natural stone test methods - Determination of the breaking load at dowel hole
ÖNORM EN 14227-3:2013-08
Действует
Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound granular mixtures
ÖNORM EN 14617-8:2007-12
Действует
Agglomerated stone - Test methods - Part 8: Determination of resistance to fixing (dowel hole)
ÖNORM EN 14227-10:2006-08
Заменен
Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement
ÖNORM EN 14891:2012-06
Заменен
Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation
ÖNORM EN 15167-1:2007-01
Действует
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
ÖNORM EN 15386:2008-01
Действует
Packaging - Flexible laminate and plastic tubes - Test method to determine the print adhesion
ÖNORM EN 14227-3:2004-10
Заменен
Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound mixtures
ÖNORM EN 13914-1:2016-09
Действует
Design, preparation and application of external rendering and internal plastering - Part 1: External rendering
ÖNORM EN 13880-12:2003-11
Действует
Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)
ÖNORM EN 13863-4:2005-01
Заменен
Concrete pavements - Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres
ÖNORM EN 15542:2008-07
Действует
Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods
ÖNORM EN 14227-1:2013-08
Действует
Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures
ÖNORM EN 13914-2:2016-09
Заменен
Design, preparation and application of external rendering and internal plastering - Part 2: Internal plastering
ÖNORM EN 14487-1:2006-05
Действует
Sprayed concrete - Part 1: Definitions, specifications and conformity
ÖNORM EN 13282-1:2013-05
Действует
Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria
ÖNORM EN 13230-1:2009-08
Заменен
Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements
ÖNORM EN 13084-5:2006-09
Действует
Free-standing chimneys - Part 5: Material for brick liners - Product specifications (consolidated version)
ÖNORM EN 14227-1:2006-05
Заменен
Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures
ÖNORM EN 14617-15:2005-05
Действует
Agglomerated stone - Test methods - Part 15: Determination of compressive strength
ÖNORM EN 15743:2010-03
Заменен
Supersulfated cement - Composition, specifications and conformity criteria
ÖNORM EN 13914-2:2017-07
Действует
Design, preparation and application of external rendering and internal plastering - Part 2: Internal plastering
ÖNORM EN 14227-12:2006-08
Заменен
Hydraulically bound mixtures - Specifications - Part 12: Soil treated by slag
ÖNORM EN 1323:2007-12
Заменен
Adhesives for tiles - Concrete slabs for tests
ÖNORM EN 1367-4:2008-07
Действует
Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
ÖNORM EN 1992-1-1:2011-12
Заменен
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings (consolidated version)
ÖNORM EN 1051-1:2003-04
Действует
Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description
ÖNORM EN 1992-1-1:2015-02
Действует
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings (consolidated version)
ÖNORM EN 1744-6:2007-01
Действует
Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
ÖNORM EN 1992-1-1:2009-07
Отменен
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings (consolidated version)
ÖNORM EN 1926:2007-03
Действует
Natural stone test methods - Determination of uniaxial compressive strength
ÖNORM EN 1169:2000-01
Действует
Precast concrete products - General rules for factory production control of glass-fibre reinforced cement
ÖNORM EN 1008:2002-10
Действует
Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
ÖNORM EN ISO 21809-5:2010-07
Заменен
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2010)
ÖNORM EN ISO 21809-5:2018-04
Действует
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017)
ÖNORM EN 492:2006-12
Заменен
Fibre cement slates and fittings - Product specification and test methods (consolidated version)
ÖNORM EN 934-5:2008-03
Действует
Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
ÖNORM EN 494:2013-11
Заменен
Fibre-cement profiled sheets and fittings - Product specification and test methods
ÖNORM EN 459-1:2015-06
Действует
Building lime - Part 1: Definitions, specifications and conformity criteria
ÖNORM EN 494:2015-12
Действует
Fibre-cement profiled sheets and fittings - Product specification and test methods
ÖNORM EN 197-5:2021-06
Действует
Cement - Part 5: Portland-composite cement CEM II/C-M and Composite cement CEM VI
ÖNORM EN 480-14:2007-01
Действует
Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
ÖNORM EN 206:2021-07
Действует
Concrete - Specification, performance, production and conformity
ÖNORM EN 480-15:2013-05
Действует
Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
ÖNORM EN 450-1:2009-09
Заменен
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
ÖNORM EN 846-13:2001-12
Действует
Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings
ÖNORM EN 450-1:2012-09
Действует
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
ÖNORM EN 206:2014-12
Заменен
Concrete - Specification, performance, production and conformity
ÖNORM EN 492:2012-11
Заменен
Fibre-cement slates and fittings - Product specification and test methods
ÖNORM EN 480-13:2015-07
Действует
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
ÖNORM EN 206-1:2005-11
Заменен
Concrete - Part 1: Specification performance, production and conformity (consolidated version)
ÖNORM EN 447:2017-11
Действует
Grout for prestressing tendons - Basic requirements
ÖNORM EN 197-2:2000-12
Заменен
Cement - Part 2: Conformity evaluation
ÖNORM EN 934-4:2009-07
Действует
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
ÖNORM EN 772-22:2019-02
Действует
Methods of test for masonry units - Part 22: Determination of freeze/thaw resistance of clay masonry units
ÖNORM EN 545:2011-03
Действует
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
ÖNORM EN 196-6:2010-03
Заменен
Methods of testing cement - Part 6: Determination of fineness
ÖNORM EN 197-2:2020-08
Действует
Cement - Part 2: Assessment and verification of constancy of performance
ÖNORM EN 480-13:2011-08
Заменен
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
ÖNORM EN 480-1:2014-12
Действует
Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
ÖNORM EN 494:2008-11
Заменен
Fibre-cement profiled sheets and fittings - Product specification and test methods (consolidated version)
ÖNORM EN 447:2008-01
Заменен
Grout for prestressing tendons - Basic requirements
ÖNORM EN 196-6:2019-02
Действует
Methods of testing cement - Part 6: Determination of fineness
ÖNORM EN 934-1:2008-05
Действует
Admixtures for concrete, mortar and grout - Part 1: Common requirements